Comparison of copper emission rates from wood treated with different preservatives to the environment

This study describes a laboratory method for the estimation of emission from preservative-treated wood in the different situations where emissions could enter the environment for use classes 3 (not in contact with ground) and 4 and 5 (in contact with the ground, fresh water or sea water) according to OECD Guidelines. Samples of scotch pine sapwood (Pinus sylvestris L.) were treated with CCA (1% and 2%), ACQ-1900 (3% and 7%), ACQ-2200 (2%), Tanalith E 3491 (2% and 2.8%), and Wolmanit CX-8 (2%).     

Investigation of bio-ethanol steam reforming over cobalt-based catalysts

The catalytic performance of cobalt catalysts supported on γ-Al₂O₃, TiO₂, ZrO₂ were studied for bio-ethanol steam reforming (BESR) reaction. The supported catalysts (10 wt%Co) were prepared by impregnation and characterized through Thermogravimetric analysis (TGA), H₂ chemisorption, laser Raman Spectroscopy, Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS), and temperature-programmed reaction (TPRxn). The metallic cobalt sites were found to correlate with the BESR reaction activity. The reaction and H₂ chemisorption showed that ZrO₂ supported catalyst showed the best dispersion and best catalytic activity. Over the 10% Co/ZrO₂ catalyst, using a H₂O:EtOH:inert molar ratio of 10:1:75 and a GHSV = 5000 h⁻¹, 100% ethanol conversion and a yield of 5.5 mol H₂/mol EtOH were obtained at 550 °C and atmospheric pressure.     

An Integrated Approach to Locality-Conscious Processor Allocation and Scheduling of Mixed-Parallel Applications

Complex parallel applications can often be modeled as directed acyclic graphs of coarse-grained application tasks with dependences. These applications exhibit both task and data parallelism, and combining these two (also called mixed parallelism) has been shown to be an effective model for their execution. In this paper, we present an algorithm to compute the appropriate mix of task and data parallelism required to minimize the parallel completion time (makespan) of these applications. In other words, our algorithm determines the set of tasks that should be run concurrently and the number of processors to be allocated to each task. The processor allocation and scheduling decisions are made in an integrated manner and are based on several factors such as the structure of the task graph, the runtime estimates and scalability characteristics of the tasks, and the intertask data communication volumes. A locality-conscious scheduling strategy is used to improve intertask data reuse. Evaluation through simulations and actual executions of task graphs derived from real applications and synthetic graphs shows that our algorithm consistently generates schedules with a lower makespan as compared to Critical Path Reduction (CPR) and Critical Path and Allocation (CPA), two previously proposed scheduling algorithms. Our algorithm also produces schedules that have a lower makespan than pure task- and data-parallel schedules. For task graphs with known optimal schedules or lower bounds on the makespan, our algorithm generates schedules that are closer to the optima than other scheduling approaches.     

Chosen postures during specific sitting activities

This research study analysed the interaction between people's postures and activities while in semi-public/leisure situations and during transportation (journey by train). In addition, the use of small electronic devices received particular emphasis. Video recordings in German trains and photographs in Dutch semi-public spaces were analysed using a variation of Branton and Grayson's (An evaluation of train seats by observation of sitting behaviour. Ergonomics, 10 (1), (1967), 35-51) postural targeting forms and photos. The analysis suggests a significant relationship between most activities and the position of the head, trunk and arms during transportation situations. The relationship during public situations is less straightforward. Watching, talking/discussing and reading were the most observed activities for the transportation and leisure situations combined. Surprisingly, differences in head, trunk, arm and leg postures were not significant when using small electronic devices. Important issues not considered in this study include the duration of the activities, the gender and age of observed subjects and the influence of the time of day. These are interesting issues to consider and include for future research. STATEMENT OF RELEVANCE: This study shows what activities people choose to carry out and their related postures when not forced to a specific task (e.g. driving). The results of this study can be used for designing comfortable seating in the transportation industry (car passenger, train, bus and aircraft seats) and semi-public/leisure spaces.     

Optimizing latency and throughput of application workflows on clusters

Scheduling, in many application domains, involves optimization of multiple performance metrics. For example, application workflows with real-time constraints have strict throughput requirements and also desire a low latency or response time. In this paper, we present a novel algorithm for the scheduling of workflows that act on a stream of input data. Our algorithm focuses on the two performance metrics, latency and throughput, and minimizes the latency of workflows while satisfying strict throughput requirements. We also describe steps to use the above approach to solve the problem of meeting latency requirements while maximizing throughput. We leverage pipelined, task and data parallelism in a coordinated manner to meet these objectives and investigate the benefit of task duplication in alleviating communication overheads in the pipelined schedule for different workflow characteristics. The proposed algorithm is designed for a realistic bounded multi-port communication model, where each processor can simultaneously communicate with at most k distinct processors. Experimental evaluation using synthetic benchmarks as well as those derived from real applications shows that our algorithm consistently produces lower latency schedules that meet throughput requirements, even when previously proposed schemes fail.     

Physical and Mechanical Properties of PP Composites based on Different Types of Lignocellulosic Fillers

The presents preparation and characterization of different types of lignocellulosic fillers (pine wood sawdust/ walnut shell flour/ black rice husk powder) reinforced polypropylene composites were presented. The effect of MAPP as coupling agent (4wt%) on the physical and mechanical properties was also investigated. Polypropylene composites were prepared at different rates of filler/matrix (wt%) by using extrusion (for melt blending) and hot compression molding process. Maximum values of tensile and flexural strength were obtained as 26.1 and 43.4 MPa, respectively, whereas the elongation at break value was 4.11% at 10% pine wood sawdust reinforced PP. Tensile and flexural modulus of composites reached the maximum values as 3855 and 3633 MPa with the composite of 30% walnut shell flour reinforced PP. Characterization of composites was carried out by using tensile test, flexural test, FT-IR, and SEM.     

Investigation of the Reduction/Oxidation Behavior of Cobalt Supported on Nano-ceria

The oxidation and reduction behavior of cobalt catalysts supported on nano-ceria (5–8 nm) was investigated under hydrogen, oxygen and water atmospheres. A novel quantitative isothermal reduction (QIR) technique was introduced to analyze the kinetics and activation barrier of Co reduction. CoO to Co reduction was found to be of first order in the 250–350 °C temperature range. Temperature programmed reduction and oxidation experiments were conducted and the Kissinger method was used to obtain apparent activation energies for reduction and oxidation with O₂. The apparent activation energy for CoO reduction was found to agree with that obtained from the QIR technique. Re-oxidation of Co metal was found to have a slightly lower activation energy barrier than the reduction. The reduction and oxidation behavior was further investigated with in situ XANES where the reaction order for reduction was observed to change at 450 °C. The pre-reduced samples were seen to re-oxidize under a water atmosphere, where the oxidation followed first order kinetics. Re-oxidation by water yielded a higher activation energy when compared to re-oxidation under oxygen.     

Towards more active and stable PdAgCr electrocatalysts for formic acid electrooxidation: The role of optimization via response surface methodology

In this study, multiwall carbon nanotube (MCNT)‐supported Pd (Pd/MWCNT) catalysts are prepared by using NaBH₄ reduction method. In order to maximize the oxidation and reduction of H₂SO₄, synthesis conditions (Pd ratio, molar ratio of NaBH₄/K₂PdCl₄, volume of deionized water, and duration of agitation) are optimized by using response surface methodology (RSM). The optimum synthesis conditions are determined as 58.2% of Pd by weight, 154.6 molar ratio of NaBH₄ to K₂PdCl₄, 19.48 mL of deionized water, and 186.16 min of agitation duration. The effect of electrochemical measurement conditions on the oxidation kinetics of Pd/MWCNT is also investigated by RSM. The optimum electrochemical measurement conditions are found as 10 μL of catalyst mixture, 90°C of H₂SO₄ solution, and 5.5 M H₂SO₄. The Pd/MWCNT, Pd₅₀Ag₅₀/MWCNT, and Pd_65.6Ag_33.6Cr_0.80/MWCNT catalysts prepared under optimized conditions are characterized by using X‐ray diffraction, transmission electron microscopy, N₂ adsorption‐desorption, and inductively coupled plasma mass spectrometry. The crystallite sizes of these catalysts are found as 4.85, 5.66, and 5.26 nm for Pd/MWCNT, Pd₅₀Ag₅₀/MWCNT, and Pd_65.6Ag_33.6Cr_0.80/MWCNT catalysts, respectively. Isotherms of all these catalysts are found to be similar to Type V isotherms with H3 hysteresis loop. The average particle size of Pd₅₀Ag₅₀/MWCNT and Pd_65.6Ag_33.6Cr_0.80/MWCNT catalysts are determined as 5.2 and 9.2 nm, respectively. Electrochemical performance of as‐prepared catalysts is evaluated by using cyclic voltammetry and chronoamperometry. The formic acid electrooxidation (FAEO) activities are found as 18.9, 27.8, and 51.6 mA/cm² for Pd/MWCNT, Pd₅₀Ag₅₀/MWCNT, and Pd_65.6Ag_33.6Cr_0.80/MWCNT, respectively. Pd_65.6Ag_33.6Cr_0.80/MWCNT shows the highest activity and stability. Optimization of synthesis conditions and electrochemical measurement parameters allow us to obtain very good electrochemical activity and stability for FAEO reaction compared with anode catalysts in the literature.