Energy use in controlled temperature marine aquaculture

Temperature control offers benefits in land‐based marine aquaculture: stock growth rates may be enhanced by heating in winter; mortality rates in summer may be reduced by cooling. However, if the plant is not well designed, temperature control may create very large energy demands. This paper describes the application of temperature control in abalone aquaculture in New Zealand, with a focus on energy considerations in plant design. An abalone farm using a semi‐closed water conditioning system is used as a case study for which an energy model, based on a heat pump system, is developed. The model is used to determine the impact of plant design and tank conditions on the economics of the operation. Copyright © 2002 John Wiley & Sons, Ltd.     

Preparation of nanocrystalline nickel oxide thin films by sol–gel process for hydrogen sensor applications

Preparation of nanocrystalline NiO thin films by sol–gel method and their hydrogen (H₂) sensing properties were investigated. The thin films of NiO were successfully deposited on the glass and SiO₂/Si substrate by a sol–gel coating method. The films were characterized for crystallinity, electrical properties, surface topography and optical properties as a function of calcination temperature and substrate material. It was found that the films produced by this method were polycrystalline and phase pure NiO. The H₂ gas sensitivity of these films was studied as a function of H₂ concentration and calcination temperature. The results indicated that the sol–gel derived NiO films could be used for the fabrication of H₂ gas sensors to monitor low concentration of H₂ in air quantitatively at low temperature range (< 200 °C).     

Estimating short and long-term residential demand for electricity: New evidence from Sri Lanka

This study investigates the short-run dynamics and long-run equilibrium relationship between residential electricity demand and factors influencing demand – per capita income, price of electricity, price of kerosene oil and price of liquefied petroleum gas – using annual data for Sri Lanka for the period, 1960–2007. The study uses unit root, cointegration and error-correction models. The long-run demand elasticities of income, own price and price of kerosene oil (substitute) were estimated to be 0.78, ? 0.62, and 0.14 respectively. The short-run elasticities for the same variables were estimated to be 0.32, ? 0.16 and 0.10 respectively. Liquefied petroleum (LP) gas is a substitute for electricity only in the short-run with an elasticity of 0.09. The main findings of the paper support the following (1) increasing the price of electricity is not the most effective tool to reduce electricity consumption (2) existing subsidies on electricity consumption can be removed without reducing government revenue (3) the long-run income elasticity of demand shows that any future increase in household incomes is likely to significantly increase the demand for electricity and (4) any power generation plans which consider only current per capita consumption and population growth should be revised taking into account the potential future income increases in order to avoid power shortages in the country.     

ZnO nanoparticles induced effects on nanomechanical behavior and cell viability of chitosan films

The aim of this paper is to develop novel chitosan–zinc oxide nanocomposite films for biomedical applications. The films were fabricated with 1, 5, 10 and 15% w/w of zinc oxide (ZnO) nanoparticles (NPs) incorporated with chitosan (CS) using a simple method. The prepared nanocomposite films were characterized using atomic force microscopy, Raman and X-ray diffraction studies. In addition, nano and micro mechanical properties were measured. It was found that the microhardness, nanohardness and its corresponding elastic modulus increased with the increase of ZnO NP percentage in the CS films. However, the ductility of films decreased as the percentage of ZnO NPs increased. Cell attachment and cytotoxicity of the prepared films at days two and five were evaluated in vitro using osteoblasts (OBs). It was observed that OB viability decreased in films with higher than 5% ZnO NPs. This result suggests that although ZnO NPs can improve the mechanical properties of pure CS films, only a low percentage of ZnO NPs can be applied for biomedical and bioengineering applications because of the cytotoxicity effects of these particles.     

A surface-enhanced Raman spectroscopy study of thin graphene sheets functionalized with gold and silver nanostructures by seed-mediated growth

We describe a simple method for decorating graphene (1–5 layers) with Au and Ag nanostructures (nanoparticles, nanorods, and nanoplates). We deposit graphene electrostatically from highly-oriented pyrolytic graphite onto Si/SiO₂ surfaces functionalized with (aminopropyl)trimethoxysilane and grow the metal nanostructures by a seed-mediated growth method from hexanethiolate-coated Au monolayer-protected cluster “seeds” that are attached to graphene by hydrophobic interactions. Scanning electron microscopy reveals the selective growth of Au or Ag nanostructures on the graphene surface. In the case of Au, the low pH 2.8 growth solution causes etching of the graphene and formation of scroll-like structures. For Ag, the high pH 9.3 solution does not seem to affect the graphene. Raman spectroscopy is consistent with the graphene morphology and reveals that the presence of Au and Ag nanostructures increases the Raman scattering from the graphene by a factor of about 45 and 150, respectively. This work demonstrates a simple method for decorating graphene with noble metal nanostructures that may have interesting optical, electronic, and chemical properties for applications in nanoelectronics, sensing, and catalysis.     

MALTING QUALITY OF SRI LANKAN VARIETIES OF SORGHUM

The malting quality of Sri Lankan sorghum was studied using seventeen varieties. These varieties represented four colour categories (brown, yellow, pink and white) of sorghum found in Sri Lanka. The main criteria used for the assessment of malting quality in this study were the malting loss, diastatic power, liquefying power and the quantity of extract. Malting losses of these varieties were somewhat higher than those encountered in malting barley. However, they appeared to depend partly on the malting conditions. The diastatic powers and liquefying powers observed in this study were inferior to those observed with barley malt. However, with some varieties they appeared to be adequate for the purpose of mashing, as indicated by the high extract values obtained, which were comparable with those of some barley malts. Extract values of the four colour categories varied considerably and the best values were observed with the yellow and pink varieties and some varieties of white. Brown varieties in spite of their comparatively high diastatic powers and liquefying powers gave very little or no extract on mashing.     

Thermal annealing effect on zinc nitride thin films deposited by reactive rf-magnetron sputtering process

Zinc nitride films were deposited by reactive radio-frequency magnetron sputtering using a zinc target in a nitrogen and argon plasma. The deposited films were annealed in either air or O₂ at 300 °C to investigate the annealing effect on the microstructure, optical properties, and electronic characteristics of zinc nitride films. It was found that the annealing process decreased the crystallinity of zinc nitride films. It was also found that the optical band gap decreased from 1.33 eV to 1.14 eV after annealing. The analysis of film composition suggested that the concentration of oxygen increased slightly after annealing. Although the conduction type of both as-deposited and annealed films were n-type, the annealed films exhibited a higher resistivity, lower carrier concentration and lower mobility than the as-deposited films. Also, it was found that the as-deposited films did not exhibit any photoconducting behavior whereas the annealed films exhibited a pronounced photoconducting behavior.     

Hydrogen sensing properties of multi-walled carbon nanotubes

The hydrogen sensing properties of multi-walled carbon nanotubes (MWNTs) synthesized by a hot filament CVD process are reported in this paper. The MWNTs were synthesized by a hot filament assisted chemical vapor deposition method using cobalt oxide nanoparticles as the catalyst on SiO₂ surfaces. The MWNTs were characterized with Raman spectroscopy and scanning electron microscopy. Two-terminal test devices were fabricated by depositing a layer of MWNTs between prefabricated gold electrodes on SiO₂ surfaces. The diameter of these MWNTs was in the 5–8 nm range. The sensitivity of carbon nanotubes was measured for different gas concentrations at different temperatures. It was found that the MWNTs were sensitive to H₂ in low temperature regions of 140–350 °C and had a maximum sensitivity (80%) at 230 °C. No sensitivity was observed at a temperature lower than 140 °C or higher than 400 °C. Though bare MWNTs are not sensitive to H₂ at room temperature, they exhibited very good sensing characteristics in the 140–300 °C range.     

Carbon helixes produced by hot filament assisted chemical vapor deposition

Carbon helix nanofibers were synthesized by a hot filament assisted chemical vapor deposition at a substrate temperature of 600 °C. It was observed that the formation of a carbon helix structure was attributed to the mixing of cobalt catalyst particles with copper. The diameter of carbon helixes varied from 20 to 500 nm. The growth mechanism and the structure of these carbon helix nanofibers are discussed based on scanning electron microscopy and Raman spectroscopy measurements.