Growth of Potassium Titanate Fibers in Flowing N2 Gas

The length of potassium titanate fibers produced by several conventional methods averages 50 μm, with a maximum of 100 μm. Extremely long fibers (most >1000 μm long) were obtained by calcination in N₂ gas flowing at 5.2×10^-4 m/s.     

High-efficiency finishing process for metal mold by large-area electron beam irradiation

A new finishing process for metal molds by large-area electron beam (EB) irradiation is proposed in this study. In the large-area EB irradiation equipment used here, an EB with high-energy density is irradiated without focusing the beam, and so the EB with a maximum diameter of 60 mm can be used for melting or evaporating metal surface instantly. Experimental results show that the surface roughness decreases from 6 μmRz to less than 1 μmRz in just a few minutes under proper machining conditions. The corrosion resistance of metal mold surface also could be greatly improved by large-area EB irradiation. Furthermore, the surface roughness of tilting surface close to 90° could be well improved. Therefore, large-area EB irradiation method has a possibility to become a high-efficiency finishing process for metal molds.     

Application of SiC-Si functionally gradient material to thermoelectric energy conversion device

Because of its high–temperature chemical stability, SiC ceramic is a promising material for high-temperature device applications such as thermoelectric energy converters. However, the electrical conductivity of SiC ceramic is too low for it to be used as a thermoelectric energy converter at the cold junction. Therefore, we propose a SiC-Si functionally gradient material (FGM) in order to improve the electrical conductivity of the SiC ceramic at the cold junction. An SiC rod was fired in a temperature gradient furnace. One end of the SiC rod was maintained at 2473 K and the other end was maintained at 1973 K for 30 min. After firing, the porous SiC edge fired at 1973 K was dipped into molten Si in order to infiltrate molten Si into the porous SiC. The microstructure of the FGM is classified into three regions: the SiC-Si composite material; the porous SiC ceramic; and the densified SiC ceramic. The electrical conductivity, the Seebeck coefficient and the thermal conductivity for each region of SiC-Si FGM was measured at 300 K; a figure of merit was calculated. The figure of merit of the SiC-Si FGM at the cold junction, at room temperature, was 10⁸ times higher than that of a nongradient SiC ceramic.     

Radiation damage induced in Si photodiodes by high-temperature neutron irradiation

Results are presented of a detailed study of the effects of high-temperature 4-MeV neutron irradiation on the performance degradation of Si pin photodiodes together with the radiation-induced defects, observed by deep level transient spectroscopy (DLTS). It was found that the dark current increases after irradiation, while the photocurrent decreases. After irradiation, two majority electron capture levels with (E _c–0.22 eV) and (E _c–0.40 eV) were induced in the n-Si substrate, while one minority hole capture level with (E _v+0.37 eV) was found. Additionally, the degradation of the device performance and the introduction rate of the lattice defects decreases with increasing irradiation temperature. For a 250 °C irradiation, the reduction of the reverse current is only 20% of the starting value. This result suggests that the creation and recovery of the radiation damage proceeds simultaneously at high temperatures.     

The role of prostate specific antigen in diagnosis of localized adenocarcinoma of the prostate. Nara Uro-Oncology Research Group

The number of cases of prostate carcinoma (PCA) is steadily inceasing in Japan. The clinical application of a reliable tumor marker, prostate specific antigen (PSA) for the diagnosis, as well as the increasing elderly population in Japan may account for this increase. The subjects were patients at the Nara Medical University and its affiliated hospitals; 1) 687 cases without PCA were evaluated for age-specific PSA and the incidence of abnormal PSA following urological manipulations, 2) 135 cases with histological proven BPH by transurethral resection of prostate (TUR-P) were examined for PSA density (PSAD) and positive PSA rate in BPH, 3) 135 cases receiving a needle biopsy with suspicion of PCA were examined for the efficacy of PSA and PSAD and other parameters, and 4) 459 PCA cases treated between 1988 and 1994, were examined for specific PSA and PSAD values by stage and degree of cell differentiation. The PSA assay used in this study was MARKIT-M PA (normal range < or = 3.6 ng/ml). The PSA was decreased gradually with age in non-PCA patients, and abnormal PSA was found in 5.5% of these patients following manipulations. The average PSA was 2.95 +/- 2.03 ng/ml in 130 BPH patients (mean age: 71.1 +/- 7.0 years old. and average prostate volume: 32.9 +/- 16.1 ml). And abnormal PSA level (more than 3.61 ng/ml) was found in 22.3%. The mean PSAD was 0.1.0 +/- 0.06, and PSAD was below 0.15 in 86.1% of these BPH cases. Among the 135 cases receiving a needle biopsy, 33 cases had PSA values between 3.61 and 10.0 ng/ml. Of these cases, PCA was found in 18.5% of the 27 cases with a PSAD below 1.5, and in 33.3% of the 6 cases with a PSAD over 1.5. PSA and PSAD were proportionally increased with stage, and a significant difference in the PSA value was observed between stage B1 and B2, and stage C and D (P < 0.05). However, PSA and PSAD values were not significantly correlated with the cell differentiation in PCA stage A2-C. In total, PSA was 18.1 ng/ml in well, 23.9 ng/ml in moderately and 35.9 ng/ml in poorly differentiated type PCA. The positive rate of PSA was 22.3, 65.4 and 83.5%, that of prostate acid phosphatase (PAP) was 10.0, 17.8 and 45.8%, and that of GSM was 25.0, 14.7 and 68.4%, in BPH, stage A PCA and stage BPCA, respectively. In conclusion, PSA is the most reliable tool in the diagnosis of localized PCA. However, the differential diagnosis of BPH and localized PCA is difficult when the PSA value is between 3.61 and 10.0 ng/ml, and accurate staging of localized PCA is difficult with PSA or PSAD alone. At present, it is necessary to use all possible tools for the early detection of localized PCA, and to perform the needle biopsy in all PCA-suspicious cases.     

MiR-10a in Pancreatic Juice as a Biomarker for Invasive Intraductal Papillary Mucinous Neoplasm by miRNA Sequencing

New biomarkers are needed to further stratify the risk of malignancy in intraductal papillary mucinous neoplasm (IPMN). Although microRNAs (miRNAs) are expected to be stable biomarkers, they can vary owing to a lack of definite internal controls. To identify universal biomarkers for invasive IPMN, we performed miRNA sequencing using tumor-normal paired samples. A total of 19 resected tissues and 13 pancreatic juice samples from 32 IPMN patients were analyzed for miRNA expression by next-generation sequencing with a two-step normalization of miRNA sequence data. The miRNAs involved in IPMN associated with invasive carcinoma were identified from this tissue analysis and further verified with the pancreatic juice samples. From the tumor-normal paired tissue analysis of the expression levels of 2792 miRNAs, 20 upregulated and 17 downregulated miRNAs were identified. In IPMN associated with invasive carcinoma (INV), miR-10a-5p and miR-221-3p were upregulated and miR-148a-3p was downregulated when compared with noninvasive IPMN. When these findings were further validated with pancreatic juice samples, miR-10a-5p was found to be elevated in INV (p = 0.002). Therefore, three differentially expressed miRNAs were identified in tissues with INV, and the expression of miR-10a-5p was also elevated in pancreatic juice samples with INV. MiR-10a-5p is a promising additional biomarker for invasive IPMN.     

Extraction and implementation of muscle synergies in neuro-mechanical control of upper limb movement

This work faces the redundancy problem, a central concern in robotics, in a particular force-producing task by using muscle synergies to simplify the control. We extracted muscle synergies from human electromyograph signals and interpreted the physical meaning of the identified muscle synergies. Based on the human analysis results, we hypothesized a novel control framework that can explain the mechanism of the human motor control. The framework was tested in controlling a pneumatic-driven robotic arm to perform a reaching task. This control method, which uses only two synergies as manipulated variables for driving antagonistic pneumatic artificial muscles to generate desired movements, would be useful to deal with the redundancy problem; thus, suggesting a simple but efficient control for human-like robots to work safely and compliantly with humans.     

Mie scattering from sphere structures in polymer blends

Polymer blends of transparent poly(methyl methacrylate) and polystyrene become opaque due to light scattering at the boundaries of the two polymers. The polymer blend is light brown when it is illuminated by white light. The coloring depends on the spherical domain structures existing in the polymer blend. The coloring was analyzed by using the rigorous Mie theory. The Mie results were compared with the semiempirical results previously reported by the authors. The wavelength dependence of theoretical scattering efficiencies on radii of scattering spheres from 0.05 to 1.2 μm was obtained for polystyrene spheres in poly(methyl methacrylate) matrix, and vice versa. The scattering at the short wavelength region is stronger than at the long wavelength region. The scattering efficiencies become almost constant in the visible wavelength region for sufficiently large spheres.     

Aldol condensation of butanal over alkali metal zeolites

Alkali metal zeolites and metal oxides were used for the aldol condensation of n-butanal to 2-ethyl-2-hexenal. The order of activity at 150 °C and 1 atm. was: CsNaY > NaY > LiNaY > MgO >Al₂O₃. Selectivity to 2-ethyl-2-hexenal was 100% for both pure and mixed isomer feed. Infrared spectroscopic studies showed that stable catalysts were produced by propene pretreatments which blocked Lewis acid sites. Adsorption of ammonia and carbon dioxide on CsNaY during aldol condensation of n-butanal causes a decrease in rate. This result, along with the order of activity, suggests that the presence of both acid and basic sites produce higher activity than strongly basic MgO.Work performed at San Jose State University.     

Reaction products of α-tocopherol with methyl linoleate-peroxyl radicals

α-Tocopherol was reacted with methyl linoleateperoxyl radicals at 37°C. The peroxyl radicals were generated by the reaction of methyl linoleate with a free radical initiator, 2,2′-azobis(2,4-dimethylvaleronitrile). The primary products of α-tocopherol with methyl linoleate-peroxyl radicals were isolated by reversephase and normal-phase high performance liquid chromatography (HPLC), and their structures were characterized by ultraviolet (UV), infrared (IR),¹H and¹³C nuclear magnetic resonance (NMR) and mass spectrometry (MS). There were four stereoisomers of methyl 13-(8a-peroxy-α-tocopherone)-9(Z),11(E)-octadecadienoate and four stereoisomers of methyl9-(8a-peroxy-α-tocopherone)-10(E),12(Z)-octadecadienoate.