Optimization of Sesame Oil Extraction by Screw-Pressing at Low Temperature

Box-Behnken designs were used to optimize a process for sesame oil extraction by screw-pressing at low temperature (50 °C). Experimental designs included seed moisture content (SMC), pressing speed (PS), and restriction die (RD) as the main processing parameters. Extractions at pilot plant scale showed a peak in oil recovery (OR, 71.1 ± 2.80%) at 12.3% SMC, 4 mm RD, and 20 rpm PS. Theoretical models were scanned against experimental data in order to scale up the proposed oil extraction process to industrial scale. A fitted model for OR showed a maximum predicted value similar to the highest experimental value (74.4 ± 1.23%) under the following conditions: 8.03% SMC, 10 mm RD, and 20 rpm PS. Chemical quality parameters of oils obtained at both pilot and industrial scales were in the ranges stated in Codex (FAO/WHO) standards for non-refined sesame oil.     

Analyzing locality over a P2P computing architecture

A characteristic of Peer-to-Peer (P2P) computing networks is their huge number of different computational resources scattered across the Internet. Gathering peers into markets according to their multi-attribute computational resources makes it easier to manage these environments. This solution is known as market overlay. In this context, the closeness of the markets with similar resources, known as locality, is a key feature for ensuring good P2P resource management. Thus, the locality feature over a market overlay allows a lack of resources in a given market to be compensated quickly by any other market with similar resources, whenever these are close to each other. Consequently, locality becomes an essential challenge.This paper addresses the analysis of the locality of P2P market over-lays. According to this, a new procedure for measuring locality is applied together with an extensive analysis of some well-known structured P2P overlays. Based on this analysis, a new P2P computing architecture, named DisCoP, oriented towards optimizing locality is proposed. Our proposal gathers the peers into markets according to their computational resources. A Hilbert function is used to arrange multi-attribute markets in an ordered and mono-dimensional space and the markets are linked by means of a Bruijn graph. In order to maintain the DisCoP locality whenever the overlay is not completed, a solution based on the virtualization of markets is also proposed. Finally, the DisCoP locality is tested together with the proposed virtualization method for approximate searches over uncompleted overlays. The simulation results show that approximate searches exploit the DisCoP locality efficiently.     

Effect of ZnO/K2O ratio on the crystallization sequence and microstructure of lithium disilicate glass-ceramics

The effect of ZnO/K₂O (Z/K) ratio on the crystallization sequence and microstructure of lithium disilicate (Li₂Si₂O₅: LS2) glass-ceramics was carefully investigated for the SiO₂-Li₂O-K₂O-ZnO-P₂O₅ system. The Z/K ratios of precursor glasses were varied from 0 to 3.5 while the nucleating agent of P₂O₅ and glass modifiers of ZnO plus K₂O were fixed to have 1.5 and 4.5 mol% relative to LS2, respectively. For the samples prepared by two-stage heat treatments of 500 °C for 1 h and 800 °C for 2 h in air, the LS2 nucleation rate was increased with increasing the Z/K ratio due to the variation in crystallization sequence from type II (Li₂SiO₃: LS) to type I (LS + LS2) in addition to an amorphous phase separation in base glass. Consequently, with increasing the Z/K ratio, the LS2 crystalline phase within the glass matrix continuously changed from larger acicular ones to smaller equiaxed ones.     

Acid catalyst influence on the polymerization time of polyfurfuryl alcohol and on the porosity of monolithic vitreous carbon

This study compares the influence of different acid catalysts on the polymerization rate of polyfurfuryl alcohol (PFA) precursor and especially on the respective porosity of Monolithic Vitreous Carbon (MVC) produced from that. Five acid catalysts commonly used were compared: p‐toluenesulfonic (PTLS), hydrochloric, sulfuric, nitric, and phosphoric. A fixed molar concentration of catalyst was diluted in PFA resin under room pressure and temperature. The time dependence of PFA resin polymerization was investigated by optical transmittance of PFA films, and the polymerization degree, characterized by ATR spectroscopy and thermogravimetry. MVC samples prepared with the same PFA resin and each catalyst were carbonized up to 1200 °C, under inert atmosphere. MVC porosity was studied by nitrogen adsorption/desorption, and by SEM and optical microscopy. Higher polymerization degree and higher residual mass were obtained with faster catalysts. No direct relation between the polymerization rate and the acid force was observed. PTLS promoted the fastest PFA polymerization process and the sulfuric acid, the slowest one. MVC samples were obtained by slow carbonization. MVC presented low specific surface S_BET from 1.4 to 7.4 m²/g. Nitric acid catalyst contributed the most to micropores formation. Micrometric apparent porosity was smaller for the catalysts having longer polymerizations times, such as phosphoric and sulfuric acid. Phosphoric catalyst corresponded to the lowest porosity in MVC. As the polymerization time increased, the average size of the micrometric surface pores tended to augment. The MVC macroscopic porosity increased with the S_BET increment. Acid catalysts choice exerted a fundamental role on the porosity of MVC. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43272.     

A less acidic human follicle-stimulating hormone preparation induces tissue-type plasminogen activator enzyme activity earlier than a predominantly acidic analogue in phenobarbital-blocked pro-oestrous rats

Follicle-stimulating hormone (FSH) exists in multiple molecular forms. In both experimental animals and in humans the production and secretion of less acidic, short-lived FSH glycoforms significantly increase during the peri-ovulatory period. To gain further insights on the physiological role of these FSH variants, we analysed the ability of two FSH compounds, recombinant FSH (rFSH) and purified FSH from urinary origin (uFSH), (less acidic and acidic pattern of FSH charge isoform distributors respectively) to induce ovarian tissue-type plasminogen activator (tPA) enzyme activity in vivo. FSH produced by Chinese hamster ovary cells and highly purified uFSH were injected at 15:00 h on the pro-oestrous day into phenobarbital-blocked rats and the ovaries were analysed for tPA enzyme activity and tPA mRNA concentrations at different times after FSH injection. Induction of tPA enzyme activity by uFSH and rFSH showed distinct dynamics depending on the particular preparation administered. In animals treated with uFSH, maximum tPA enzyme activity was detected at 20:00 h, and maximum tPA mRNA concentrations were detected at 17:00 h. tPA enzyme activity induction by rFSH was at the maximum at 17:00 h, and maximum tPA mRNA concentration was at 16:00 h (P< 0.05 for uFSH versus rFSH). All animals in the uFSH- and rFSH-treated groups and none in phenobarbital-blocked, saline-treated controls ovulated. No significant differences were present in the number of ova shed by rats treated with uFSH or rFSH and spontaneously ovulating rats (10.7+/-1.7, 10.0+/-2.6 and 11.3+/-1.6 respectively). These data indicate that the increased biological activity exhibited by less acidic FSH glycovariants at the target cell level may compensate for the drawback imposed by their relatively short plasma half-life.     

Identification of ARMA models using intermittent and quantized output observations

This paper studies system identification of ARMA models whose outputs are subject to finite-level quantization and random packet dropouts. Using the maximum likelihood criterion, we propose a recursive identification algorithm, which we show to be strongly consistent and asymptotically normal. We also propose a simple adaptive quantization scheme, which asymptotically achieves the minimum parameter estimation error covariance. The joint effect of finite-level quantization and random packet dropouts on identification accuracy are exactly quantified. The theoretical results are verified by simulations.     

Factors influencing the soil-air partitioning and the strength of soils as a secondary source of polychlorinated biphenyls to the atmosphere

Soils are a major reservoir of persistent organic pollutants, and soil-air partitioning and exchange are key processes controlling the atmospheric concentrations and regional fate of pollutants. Here, we report and discuss the concentrations of polychlorinated biphenyls (PCBs) in soils, their measured fugacities in soil, the soil-air partition coefficients (K(SA)) and soil-air fugacity gradients in rural background areas of N-NE Spain and N-NW England. Four sampling campaigns were carried out to assess seasonal and daily variability and differences between sampling sites. K(SA) values were significantly dependent on soil temperature and soil organic matter quantity, and to a minor extent organic matter type. All the PCB congeners in the soil are close to equilibrium with the atmosphere at rural Ebro sites, but soil fugacities tend to be higher than ambient air fugacities in early and late summer, consistent with the influence of temperature on soil-air partitioning. Therefore, during warm periods, soils increment their strength as secondary sources to the atmosphere. The mixture of PCBs found in the atmosphere is clearly strongly influenced by the mixture of PCBs which escape from soil, with significant correlations between them (R(2) ranging between 0.35 and 0.74 and p-level <0.001 for the Ebro sampling sites). Conversely, the close-to-equilibrium to net sink status of rural UK sites, suggest a close coupling of air and soil concentrations, but it is not possible to elucidate the importance of these soils as secondary sources yet, and presumably there are still significant primary sources to the regional/global environment.     

Varietal and crop year effects on lipid composition of walnut (Juglans regia) genotypes

The FA, unsaponifiable, and volatile constituents of oil from three walnut varieties from two consecutive crop years were studied. The walnut oils (WO) were rich in PUFA and low in saturated FA. The tocopherol fraction consisted mainly of γ-tocopherol. High contents of β-sitosterol were found, together with campesterol and Δ⁵-avenasterol in similar amounts. Methylsterols present in WO were identified as cycloartenol, cyclolaudenol, cycloeucalenol, and 24-methylenecycloartanol. The hydrocarbon fraction was characterized by the predominance of C₁₄–C₂₀ n-alkanes. The major volatiles were aldehydes produced through the linoleic acid oxidative pathway. FA, methylsterols, and some hydrocarbons presented statistically significant differences among varieties. Most of this variation was due to the genotype. The Franquette variety was noteworthy by its higher oil and oleic acid contents. In contrast, tocopherols and volatile compounds showed minor differences among varieties; they were strongly influenced by the crop year. Chemical data were subjected to principal component analysis. The parameters that gave the greatest discrimination between the walnut varieties were oleic and linolenic acids, tetradecane, eicosane, tetracosane, cycloartenol, and 24-methylenecycloartanol. These components presented the major varietal influences and could be useful to determine the identity of walnut genotypes.     

Biodegradation of sulfamethazine by Trametes versicolor: Removal from sewage sludge and identification of intermediate products by UPLC-QqTOF-MS

Degradation of the sulfonamide sulfamethazine (SMZ) by the white-rot fungus Trametes versicolor was assessed. Elimination was achieved to nearly undetectable levels after 20 h in liquid medium when SMZ was added at 9 mg L^− 1. Experiments with purified laccase and laccase-mediators resulted in almost complete removal. On the other hand, inhibition of SMZ degradation was observed when piperonilbutoxide, a cytochrome P450-inhibitor, was added to the fungal cultures. UPLC-QqTOF-MS analysis allowed the identification and confirmation of 4 different SMZ degradation intermediates produced by fungal cultures or purified laccase: desulfo-SMZ, N⁴-formyl-SMZ, N⁴-hydroxy-SMZ and desamino-SMZ; nonetheless SMZ mineralization was not demonstrated with the isotopically labeled sulfamethazine-phenyl-¹³C₆ after 7 days. Inoculation of T. versicolor to sterilized sewage sludge in solid-phase systems showed complete elimination of SMZ and also of other sulfonamides (sulfapyridine, sulfathiazole) at real environmental concentrations, making this fungus an interesting candidate for further remediation research.