The effect of rice bran on physicochemical,textural and glycaemic properties of ready-to-eat extruded corn snacks

In this work, corn extruded snack products were enriched with rice bran (RB) at 10% and 15%. A co-rotating twin-screw extruder was used with a feed moisture content of 16 g 100 g⁻¹, a screw speed of 240 r.p.m. and four heating sections of the barrel (100, 140, 150 and 150 °C). The impact of RB inclusion on nutritional profile, starch digestion, physicochemical and textural properties of snack products was evaluated. RB-enriched extrudates showed a lower specific volume and hardness and higher crispness than control. RB at 15% gave a water-holding capacity lower than control. Rheology of extrudate dispersions indicated an increase in elastic interactions and solid-like behaviour with RB supplementation. Differences in rheological properties resulted in attenuation of predictive glycaemic response for RB-enriched snacks.     

Solid state reactions between SiC and Ir

Reactivity between SiC and Ir as a function of SiC-crystallinity was investigated by diffusion bonding technique under a vacuum and over the temperature range of 1200–1450 °C. As reaction products, various Ir-silicides and free unreacted-C were detected. Reactivity is strongly affected by the temperature and SiC-crystallinity involving a series of interactions, from “no reaction” to “massive exothermic reactions”. In particular, interfacial phenomena are more pronounced by the presence of defects and grain boundaries.Solid state reactions result in formation of fine C-precipitates rearranged in a quasi-periodic microstructure. On the contrary, clustering of highly ordered C-precipitates (C-graphitized) occurs after “massive reactions” take place.A relationship between the degree of graphitization (from 1 to multi-layers of graphene), temperature and SiC crystallinity was found by Raman spectroscopy. 2D-layering phenomenon is enhanced in polycrystalline SiC at high temperature.     

A Sensitivity-Based Design Space Exploration Methodology for Embedded Systems

In this paper, we propose a system-level design methodology for the efficient exploration of the architectural parameters of the memory sub-systems, from the energy-delay joint perspective. The aim is to find the best configuration of the memory hierarchy without performing the exhaustive analysis of the parameters space. The target system architecture includes the processor, separated instruction and data caches, the main memory, and the system buses. To achieve a fast convergence toward the near-optimal configuration, the proposed methodology adopts an iterative local-search algorithm based on the sensitivity analysis of the cost function with respect to the tuning parameters of the memory sub-system architecture. The exploration strategy is based on the Energy-Delay Product (EDP) metric taking into consideration both performance and energy constraints. The effectiveness of the proposed methodology has been demonstrated through the design space exploration of a real-world case study: the optimization of the memory hierarchy of a MicroSPARC2-based system executing the set of Mediabench benchmarks for multimedia applications. Experimental results have shown an optimization speedup of 2 orders of magnitude with respect to the full search approach, while the near-optimal system-level configuration is characterized by a distance from the optimal full search configuration in the range of 2%.     

DILIGENT: integrating digital library and Grid technologies for a new Earth observation research infrastructure

This paper introduces DILIGENT, a digital library infrastructure built by integrating digital library and Grid technologies and resources. This infrastructure allows different communities to dynamically build specialised digital libraries capable to support the entire e-Science knowledge production and consumption life-cycle by using shared computing, storage, content, and application resources. The paper presents some of the main software services that implement the DILIGENT system. Moreover, it exemplifies the provided features by presenting how the DILIGENT infrastructure is being exploited in supporting the activity of user communities working in the Earth Science Environmental sector. This work is partially funded by the European Commission in the context of the DILIGENT project, under the 2nd call of FP6 IST priority.     

Necrotizing enterocolitis

Advances in neonatal care have resulted in an enlarging population of vulnerable premature newborns at risk for necrotizing enterocolitis (NEC). This article presents data supporting a unifying hypothesis for the initiation of NEC based on bacteria as the inciting agent(s), and the preterm baby as the vulnerable host. Facts and controversies concerning the pathology, microbiology, clinical presentation, management and outcome of infants afflicted with NEC are presented.     

Formation of cadmium-containing W-type hexagonal ferrite

The main steps of the phase formation processes which take place in samples of W-type hexaferrites containing cadmium, prepared by chemical coprecipitation, have been analysed. The processes were followed by Mössbauer spectroscopy, powder X-ray diffraction, thermomagnetic analysis and magnetic measurements. For samples heated in the temperature range 1000–1100°C, the phase formation processes are the same as those verified for the other zinc, nickel, cobalt W-type compounds: forT _h=1000°C the only phases present are SrFe₁₂O₁₉ (M-type ferrite) and CdFe₂O₄ (spinel ferrite); in contrast, forT _h>1100°C, the solid state reaction between the M-type and the spinel phases does not take place and the spinel phase decomposes, leading to the formation of -Fe₂O₃.     

The AFLATOX® Project: Approaching the Development of New Generation,Natural-Based Compounds for the Containment of the Mycotoxigenic Phytopathogen Aspergillus flavus and Aflatoxin Contamination

The control of the fungal contamination on crops is considered a priority by the sanitary authorities of an increasing number of countries, and this is also due to the fact that the geographic areas interested in mycotoxin outbreaks are widening. Among the different pre- and post-harvest strategies that may be applied to prevent fungal and/or aflatoxin contamination, fungicides still play a prominent role; however, despite of countless efforts, to date the problem of food and feed contamination remains unsolved, since the essential factors that affect aflatoxins production are various and hardly to handle as a whole. In this scenario, the exploitation of bioactive natural sources to obtain new agents presenting novel mechanisms of action may represent a successful strategy to minimize, at the same time, aflatoxin contamination and the use of toxic pesticides. The Aflatox^® Project was aimed at the development of new-generation inhibitors of aflatoxigenic Aspergillus spp. proliferation and toxin production, through the modification of naturally occurring molecules: a panel of 177 compounds, belonging to the thiosemicarbazones class, have been synthesized and screened for their antifungal and anti-aflatoxigenic potential. The most effective compounds, selected as the best candidates as aflatoxin containment agents, were also evaluated in terms of cytotoxicity, genotoxicity and epi-genotoxicity to exclude potential harmful effect on the human health, the plants on which fungi grow and the whole ecosystem.     

Sublattice magnetization and cation distribution in BaMg2Fe16O27(Mg2W) ferrite

Mössbauer measurements were carried out in compound BaMg2Fe16O27(Mg2W) by utilizing both polycrystalline and single-crystal samples. The resonant γ-absorption spectra have been measured with the absorbers at temperatures of 85 to 800°K and in some cases in the presence of a 15-kOe external magnetic field. The values of the hyperfine magnetic fields Hhfat the Fe⁵⁷nuclei in the different sublattices as functions of temperature have been measured. By fitting the curve of the saturation magnetization σ versus temperature, the cation distribution over the available lattice sites has been deduced. From the value of σ extrapolated at 0°K, it turns out that the number of Bohr magnetons(n_{B})Wper elementary cell is higher than the value obtained by adding the corresponding values for theSandMstructures. The Curie temperature of the compounds has also been measured and is equal to (440 ± 5)°C.