Characteristics of tiger nut milk: effects of milling

A standard method for the extraction of tiger nut milk has been introduced. It has been shown that, although milling duration improves the yield of tiger nut milk solids and its nutrient composition, there is a quantifiable loss of nutrient in the pressing residue during milk extraction. Milling duration improved the colloidal stability of the milk against creaming during 16 h of storage. A higher milling intensity resulted in the aggregation of biological polymers which resulted in colloidal destabilisation. Milling improved the lightness and stability and reduced browning rate of the tiger nut milk during storage. This report is important for the production of tiger nut milk of consistent and comparable characteristics. Milling has been introduced as a processing method for the qualitative and quantitative modulation of the properties of tiger nut milk. It is recommended to develop further strategies to improve the colloidal stability of tiger nut milk as a beverage.     

Combination of nuclear magnetic resonance spectroscopy and nonlinear methods to analyze the copolymerization of phosphonic acid derivatives

We demonstrate in this study that the combination of modern inline monitoring methods [here: inline nuclear magnetic resonance (NMR)] with simulations gains more exact and profound kinetic results than previously used methods like linearization without that combination. The ¹H-NMR spectroscopic data (more than 100 data points) are used to construct the copolymerization diagram. The reactivity ratios are obtained applying the van Herks nonlinear least square method. The examination of the radical copolymerization of 2-hydroxyethyl methacrylate (HEMA) with (2-{[2-(ethoxycarbonyl)prop-2-en-1-yl]oxy}ethyl) phosphonic acid (ECPPA) as important adhesive monomer used in dentistry yields reactivity ratios of r_HEMA = 1.83; r_ECPPA = 0.42. The copolymerization diagram reflects nonideal, non-azeotropic copolymerization. The sequence distribution of the obtained by Monte Carlo simulation indicates the generation of statistical copolymers. As an important finding, it is demonstrated that the repeating units responsible for etching and adhesion are arranged over the whole polymer chain, which is necessary to achieve proper functionality. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48256.     

ENHANCING THE CREATIVITY OF REENGINEERING Techniques for Making IS More Creative

Industries in the US continue to lose ground in international competition. If IS is to help change that trend, it will have to become more creative. Creativity improvement programs are being introduced in other areas of the company— now is the time for IS organizations to follow suit.     

Development and characterization of a biocompatible OH-modified copolymer based on polyurethane

Different polyurethanes were synthesized by varying the diol as well as the diisocyanate components and chain extenders. Polyurethanes with OH-groups were obtained by photo- and thermoinitiation of the radical polymerization of hydroxy alkyl acrylates in the presence of the polyurethanes. The polymers were evaluated with respect to their biocompatibility by measuring the cell spreading, the rates of DNA- and protein synthesis and the swelling behaviour. The differences in the surfaces and the bulks between the selected basic polyurethane and the functionalized modification were determined and characterized by XPS, FTIR-ATR and ¹³C-FT-NMR-spectroscopy. The mechanical data of Tecoflex EG 60D® and Pellethane 2363–80AE® were compared with the data of the synthesized polyurethanes.     

Sub‐Micron Anisotropic InP‐based III–V Semiconductor Material Deep Etching for On‐Chip Laser Photonics Devices

Two InP‐based III–V semiconductor etching recipes are presented for fabrication of on‐chip laser photonic devices. Using inductively coupled plasma system with a methane free gas chemistry of chlorine and nitrogen at a high substrate temperature of 250 °C, high aspect ratio, anisotropic InP‐based nano‐structures are etched. Scanning electron microscopy images show vertical sidewall profile of 90° ± 3°, with aspect ratio as high as 10. Atomic Force microscopy measures a smooth sidewall roughness root‐mean‐square of 2.60 nm over a 3 × 3 μm scan area. The smallest feature size etched in this work is a nano‐ring with inner diameter of 240 nm. The etching recipe and critical factors such as chamber pressure and the carrier plate effect are discussed. The second recipe is of low temperature (?10 °C) using Cl₂ and BCl₃ chemistry. This recipe is useful for etching large areas of III–V to reveal the underlying substrate. The availability of these two recipes has created a flexible III–V etching platform for fabrication of on‐chip laser photonic devices. As an application example, anisotropic InP‐based waveguides of 3 μm width are fabricated using the Cl₂ and N₂ etch recipe and waveguide loss of 4.5 dB mm^?1 is obtained.

     

The Donauspital-Stolzalpe concept (Danube Hospital, Vienna, Austria). Corrective osteotomy with selective labrum surgery following preoperative MRI arthrography

Concomitant pathologies (labral lesions, intra-/extra-osseous ganglia and stress bone marrow edema) in adult residual hip dysplasia (RHD) might influence the outcome of conservative hip surgery. The aim of our prospective clinical study was to assess the value of preoperative MR arthrography in diagnosing concomitant lesions and in making surgical decisions in RHD. The first 37 consecutive patients with a minimum follow-up of 18 months have been analysed. All 37 patients presented RHD with the clinical symptomatology of labral lesions and underwent routine preoperative MRA. According to clinical, radiological and MR arthrographical criteria, these 37 patients were subdivided into four therapeutic subgroups: (1) reorientation of the acetabulum using the T?nnis triple pelvic osteotomy (TPO); (2) intertrochanteric varisation osteotomy (IVO); (3) palliative decompression with only symptomatic partial resection of the torn labrum (PALL); (4) primary total hip replacement (TEP). Based on the preliminary clinical and radiological outcomes of these four subgroups, the following conclusions can be drawn: labral lesions are considered to be a sign of chronic joint instability. Therefore, acetabular malorientation should be corrected by redirectional osteotomy of the acetabulum (TPO-subgroup) even in low grades of RHD if labral lesions are present. "Palliative" labral resections without corrective osteotomy (PALL subgroup) in secondary osteoarthritis due to RHD are definitively obsolete, because they rapidly progress to severe osteoarthritis due to surgically accelerated joint instability. In RHD with highly osteoarthritic hip joints and concomitant lesions, one should not hesitate to perform primary THR even in young patients.     

Nano-structured solid oxide fuel cell design with superior power output at high and intermediate operation temperatures

A solid oxide fuel cell (SOFC) with a thin-film yttria-stabilized zirconia (YSZ) electrolyte was developed and tested. This novel SOFC shows a similar multilayer set-up as other current anode-supported SOFCs and is composed of a Ni/8YSZ anode, a gas-tight 8YSZ electrolyte layer, a dense Sr-diffusion barrier layer and a LSCF cathode. To increase the power density and lower the SOFC operating temperature, the thickness of the electrolyte layer was reduced from around 10 μm in current cells to 1 μm, using a nanoparticle deposition method. By using the novel 1 μm electrolyte layer, the current density of our SOFC progressed to 2.7, 2.1 and 1.6 A/cm² at operation temperatures of 800, 700 and 650°C, respectively, and out-performs all similar cells reported to date in the literature. An important consideration is also that cost-effective dip-coating and spin-coating methods are applied for the fabrication of the thin-film electrolyte. Processing of 1 μm layers on the very porous anode substrate material was initially experienced as very difficult and therefore 8YSZ nanoparticle coatings were developed and optimized on porous 8YSZ model substrates and transferred afterwards to regular anode substrates. In this paper, the preparation of the novel SOFC is shown and its morphology is illustrated with high resolution SEM pictures. Further, the performance in a standard SOFC test is demonstrated.     

First experiences with the Polish Optical Internet

The paper describes the new development programme of the Polish information infrastructure. The programme, called in Polish PIONIER: (English—PIONEER) Polish Optical Internet, Advanced Applications, Services and Technologies for the Information Society, has been proposed to the Polish State Committee for Scientific Research and has been accepted. The aim of the programme is to create an advanced infrastructure together with tools, services and applications available to the entire scientific community and eventually to government and local administrations as well as society in general. Services and applications are expected to appear as selected pilot realizations in order to verify deployed technologies. Some of the pilot realizations and testbeds are also presented in the paper.     

Patient views of adverse events: comparisons of self-reported healthcare staff attitudes with disclosure of accident information

In the present paper, we report results of surveys in 2003 in Japan and Denmark about patients' views about adverse events, focusing on the actions of healthcare staff involved in a medical accident. Results show that patients were more likely to indicate negative expectations to a doctor's reactions after a medical accident when asked in general terms than when asked in relation to concrete case stories. When asked in general terms, 66% (47%) of Japanese (Danish) respondents expected that doctors sometimes hold back on providing information to patients about a medical accident, while 37% (7%) did so when asked about a concrete, mild-outcome case. We examine some possible reasons for the relatively high level of distrust of Japanese patients, and we discuss whether the seemingly lower level of disclosure in Japan than in Denmark and the negative stories in the Japanese press may have an impact. We also suggest some implications for introducing a patient-centred or customer-centred approach to risk management in healthcare and other domains.