The electrical properties of post-deposition annealed and as-deposited In-doped CdTe thin films

The electrical properties of CdTe thin film have been studied and discussed, including, the conduction mechanism, and the effect of temperature and indium doping on the current passing through the CdTe film and hence on the film conductivity. It is observed that the CdTe film is of the modified Poole–Frenkel conduction mechanism and the resistivity of the film can be lowered by more than one order of magnitude due to indium doping.     

2-Hydroxy-1, 4-napthoquinone solubilization,thermodynamics and adsorption kinetics with surfactant

2-Hydroxy-1,4-napthoquinone(lawsone) natural red-orange dye was extracted from fresh henna(Lawsonia inermis) leaves in an alkaline media.The lawsone-surfactant solubilization constants(K_(LS))were calculated for the first time by using cationic cetyltrimethylammonium bromide(CTAB) and anionic sodium dodecyl sulphate(SDS).The standard free energy,concentration of solubilized lawsone and number of lawsone molecules solubilized into micelles were calculated and discussed.Surface excess,minimum surface area per molecule,surface pressure,free energy(adsorption and aggregation) and equilibrium constants of different states were determined from tensiometry.Different metal ions(Ag~+,Co~(2+),Cu~(2+),Ni~(2+),Fe~(3+),Zn~(2+) and Al~(3+)) were used to determine the complex forming ability with lawsone.Out of these,Ag~+ ions have strong binding capacity with lawsone.The adsorption of lawsone on the surface of glass with silver ions in presence of CTAB was also observed at pH 9.0.The pseudo-first, secondorder kinetic equation,intraparticles diffusion and Elovich models were used to determine the kinetics of lawsone adsorption onto the surface of glass and a probable mechanism has been discussed.Lawsone adsorption followed second-order kinetic equation(k_2=0.019 g·mg~(-1)·min~(-1)).     

Investigation of microstructure of molybdenum—copper black electrodeposited coatings with reference to solar selectivity

Optical and microstructural properties of electrodeposited molybdenum-copper (Mo-Cu) black coatings have been studied with reference to their selectivity in absorption of solar radiation. Such coatings were found to have a solar absorptance, , about 0.87 and low thermal emittance, , such that the selectivity, /, was 3.6. Electrodeposited molybdenum-black coatings generally have selectivity /3. The oxidation state of molybdenum in (Mo-Cu) black coatings as determined by X-ray photoelectron spectroscopy is about + 5 (which is fairly close to that of Mo₄O₁₁). Large numbers of irregular particles were found on the surface of molybdenum-copper black coatings. There is evidence that the particles contain copper oxide.     

Polyester composite based on betelnut fibre for tribological applications

A polyester composite based on betelnut fibres was fabricated and its adhesive wear and frictional performance studied using a block on disk machine at different applied loads and sliding distances at 2.8 m/s sliding velocity under dry/wet contact conditions. SEM was used to study worn surface morphology. The results revealed that betelnut fibre reinforced polyester (BFRP) composite had better wear and frictional performance under wet contact condition compared to dry. The wear mechanism of the BFRP composite was predominated by micro and macro-cracks in the polyester regions and debonding of fibres.     

AASHTO-LRFD Live Load Distribution for Beam-and-Slab Bridges: Limitations and Applicability

This paper presents a comparison between the live load distribution factors of simple span slab-on-girders concrete bridges based on the current AASHTO-LRFD and finite-element analysis. In this comparison, the range of applicability limits specified by the current AASHTO-LRFD is fully covered and investigated in terms of span length, slab thickness, girder spacing and longitudinal stiffness. All the AASHTO-PCI concrete girders (Types I–VI) are considered to cover the complete range of longitudinal stiffness specified in the AASHTO-LRFD. Several finite-elements linear elastic models were investigated to obtain the most accurate method to represent the bridge superstructure. The bridge deck was modeled as four-node quadrilateral shell elements, whereas the girders were modeled using two-node space frame elements. The live load used in the analysis is the vehicular load plus the standard lane load as specified by AASHTO-LRFD. The live load is positioned at the longitudinal location that produced the extreme effect, and then it is moved transversely across the bridge width in order to investigate all possibilities of one-lane, two-lane and three-lane design loads. A total of 886 bridge superstructure models were built and analyzed using the computer program SAP2000 to perform this comparison. The results of this study are presented in terms of figures to be practically useful to bridge engineers. This study showed that the AASHTO-LRFD may significantly overestimate the live load distribution factors compared to the finite-element analysis.     

Cloning of the bile salt hydrolase (bsh) gene from Enterococcus faecium FAIR-E 345 and chromosomal location of bsh genes in food enterococci

Enterococcus faecium strain FAIR-E 345 isolated from food was shown to possess bile salt hydrolase (Bsh) activity in a plate screening assay and by high-performance liquid chromatography analysis. The bsh gene was cloned and sequenced. DNA sequence analysis revealed that it encoded a protein of 324 amino acids, with pI 4.877. A bsh gene probe was prepared from the cloned bsh gene and was used for probing plasmid and total genomic DNA of Bsh-positive enterococci isolated from food to determine the genomic location of their bsh genes. This probe was able to detect the bsh gene among total genomic DNA preparations but not from plasmid preparations of 10 plasmid-bearing Enterococcus strains. However, the probe could detect the bsh gene from total genomic DNA preparations of 12 Enterococcus strains that did not contain detectable plasmid DNA. In no cases did the probe hybridize with plasmid DNA preparations, suggesting that the bsh gene among enterococci is probably generally chromosomally encoded. This presumptive chromosomal location of bsh genes among food enterococci suggests that transfer of this trait by conjugative plasmids is unlikely.     

Magnetic resonance imaging scanning in the diagnosis of zone II flexor tendon rupture

This study was undertaken to determine the usefulness of magnetic resonance imaging (MRI) in the diagnosis of flexor tendon rupture in patients who had prior surgery. Magnetic resonance imaging scans were performed on 11 digits (16 tendons) with the clinical diagnosis of flexor tendon rupture. Clinical suspicion correlated with MRI and surgical findings. Clinical examination yielded a 60% accuracy in diagnosis. MRI differentiated rupture from adhesions with a 100% accuracy rate. The MRI scan is a valuable tool in diagnosing tendon ruptures and may help reduce the incidence of unnecessary tendon explorations.     

Sequential transfer of free flap to two defects

This case report describes the use of a single lateral arm flap sequentially transferred to two defects in a bilateral hand injury. We believe this is a novel approach in reconstructing defects in bilateral hands when a staged reconstruction is planned.