Effect of the cultivation mode on red pigments production from Monascus ruber

In submerged cultures performed in chemically defined fermentation medium containing glucose and glutamate, the growth and production of water‐soluble red pigments and citrinin by the filamentous fungus Monascus ruber were studied under various carbon/nitrogen (C/N) ratios. The specific production of the red pigments was optimal at a glucose/glutamate ratio of about 10 and then steadily decreased at higher C/N ratio. In contrast, the production of the mycotoxin increased with increased C/N with an optimum in the range of 30–45. In a fed‐batch mode, it was also found that the production of pigments was not favoured in fed‐batch mode by feeding the medium with glucose while keeping the C/N ratio lower than 10. This low production likely resulted from concurrent high accumulation of L‐malic acid that was reported to inhibit this production. In contrast, this mode of cultivation was rather favourable for the production of the mycotoxin.     

Study of the effect of BDMA catalyst in the epoxy novolac curing process by isothermal DSC

Epoxy novolac/anhydride cure kinetics has been studied by differential scanning calorimetry under isothermal conditions. The system used in this study was an epoxy novolac resin (DEN431), with nadic methyl anhydride as hardener and benzyldimethylamine as accelerator. Kinetic parameters including the reaction order, activation energy and kinetic rate constants, were investigated. The cure reaction was described with the catalyst concentration, and a normalized kinetic model developed for it. It is shown that the cure reaction is dependent on the cure temperature and catalyst concentration, and that it proceeds through an autocatalytic kinetic mechanism. The curing kinetic constants and the cure activation energies were obtained using the Arrhenius kinetic model. A suggested kinetic model with a diffusion term was successfully used to describe and predict the cure kinetics of epoxy novolac resin compositions as a function of the catalyst content and temperature. Copyright © 2003 Society of Chemical Industry     

A multigrid accelerated hybrid unstructured mesh method for 3D compressible turbulent flow

 A cell vertex finite volume method for the solution of steady compressible turbulent flow problems on unstructured hybrid meshes of tetrahedra, prisms, pyramids and hexahedra is described. These hybrid meshes are constructed by firstly discretising the computational domain using tetrahedral elements and then by merging certain tetrahedra. A one equation turbulence model is employed and the solution of the steady flow equations is obtained by explicit relaxation. The solution process is accelerated by the addition of a multigrid method, in which the coarse meshes are generated by agglomeration, and by parallelisation. The approach is shown to be effective for the simulation of a number of 3D flows of current practical interest. Sponsored by The Research Council of Norway, project number 125676/410 Dedicated to the memory of Prof. Mike Crisfield, a respected colleague     

Microstructure of Feta Cheese Made Using Different Cultures as Determined by Confocal Scanning Laser Microscopy

ABSTRACT: The objective of this work was to observe the microstructure of feta cheese using confocal scanning laser microscopy. Low fat cheese and cheese containing capsule-producing cultures were made. The protein network was observed using the reflectance mode of the confocal microscope. Fat was stained by Nile red dye diluted with whey. More even distribution of fat with a larger number of smaller globules was observed in cheese made with noncapsule-forming culture compared to that made with the capsule-forming culture. Nonfat cheese had compact structure when made with noncapsule-forming culture which contrasted with the open structure observed in cheese made with the capsule-forming culture     

Expression of three UDP-N-acetyl-alpha-D-galactosamine:polypeptide GalNAc N-acetylgalactosaminyltransferases in adenocarcinoma cell lines

The levels of mRNA expression of three UDP-N-acetyl-alpha-D-galactosamine:polypeptide GalNAc N-acetylgalactosaminyltransferases (GalNAc-transferases) were quantified for human adenocarcinoma cell lines from pancreas, colon, stomach, and breast. Two of the GalNAc-transferases, GalNAc-T1 and GalNAc-T2, were expressed constitutively and at low levels in most or all cell lines examined. A third GalNAc-transferase, GalNAc-T3, was differentially expressed. Well-differentiated adenocarcinoma cell lines expressed high levels and moderately differentiated cell lines expressed lower levels of GalNAc-T3. Cell lines classified as poorly differentiated failed to express GalNAc-T3 mRNA at levels that could be detected by Northern blot analysis. Differential expression of the GalNAc-T3 protein was confirmed in these cell lines by Western blotting. We propose that glycosylation in tumor cell lines may be regulated in part by differential expression of GalNAc-transferases, and we suggest that GalNAc-T3 gene expression may be a molecular indicator of differentiated adenocarcinoma.     

Truthful Approximation Mechanisms for Scheduling Selfish Related Machines

We consider the problem of scheduling jobs on related machines owned by selfish agents. We provide a 5-approximation deterministic truthful mechanism, the first deterministic truthful result for the problem. Previously, Archer and Tardos showed a 2-approximation randomized mechanism which is truthful in expectation only (a weaker notion of truthfulness). In case the number of machines is constant, we provide a deterministic Fully Polynomial-Time Approximation Scheme (FPTAS) and a suitable payment scheme that yields a truthful mechanism for the problem. This result, which is based on converting FPTAS to monotone FPTAS, improves a previous result of Auletta et al., who showed a (4 + ε)-approximation truthful mechanism.     

Some factors affecting the electrical properties of carbon-black-loaded butyl rubber during vulcanization

Butyl rubber mixtures loaded with 70 phr general purpose furnace black (GPF) and tetramethyl thiuram disulphide (TMTD)/S as vulcanizing system were prepared. The kinetics of their electrical conductivity development during the vulcanization process were followed by using an especially devised system. It was found that the increase in the electrical conductivity during vulcanization obeys an exponential growth function with time constant τ, which markedly decreases with increasing vulcanization temperature as well as with the efficiency of the vulcanizing system. After completion of the vulcanization process, about 80 min, the samples obtained possess reasonable stability and reproducibility of electrical conductivity.     

Activation process-dependent characteristics of novel thermionic oxide cathodes for CRT application

The emission and conductivity characteristics of oxide cathodes depend largely on the activation process. In this paper, the electrical properties of new type of oxide cathodes for cathode ray tube (CRT) application, supplied by LG Philips Displays, have been investigated in relation to different cathode activation regimes. The influence of the activation process over different durations has been investigated. A temperature of T=1425 K was chosen to be higher than the optimum cathode activation temperature (T=1200 K), and the other temperature of T=1125 K was lower than that. The electron activation energy (E) was found to vary in the range from 0.58 to 2.28 eV for cathodes activated at the higher temperature regime, and from 1.08 to 1.9 eV for those activated at the lower temperature regime. Scanning electron microscopy (SEM) and electron diffraction X-ray (EDX) analyses show a structural phase transformation in the oxide material that was activated at 1125 K for a period of 1-12 hours. The SEM mapping shows a large contamination of Ba in the top layer of oxide material. The activator agents tungsten and aluminum are found to penetrate into the BaO/spl bsol/SrO layer in two different ways.     

Inhibitory activity of ginger rhizome on airway and uterine smooth muscle preparations

In this study, we describe the tracheal-relaxant and tocolytic activities of the methanol (ME) and aqueous (AQ) crude extracts of ginger (rhizome of Zingiber officinale) in an attempt to rationalize its traditional use in disorders of airways and uterine hyperactivity. Both of the ginger extracts dose-dependently relaxed K⁺ (80 mM) and carbachol (CCh, 1 μM)-induced contractions with more potency against K⁺, similar to that elicited by verapamil, a Ca²⁺ channel blocker. In isolated uterine preparations, the extracts suppressed the K⁺-induced contractions with respective EC₅₀ values of 0.03 mg/ml (0.02–0.05, 95% CI) and 0.05 mg/ml (0.04–0.06). Activity-directed fractionation of AQ yielded an organic and an aqueous fraction with the activities concentrated in the former. Both the crude extracts were found safe in mice up to the oral dose of 5 g/kg when tested for acute toxicity for 24 h. The study shows that ginger possesses tracheal and uterine smooth muscle relaxant activity, possibility mediated via Ca²⁺ channel blockade, justifying its use in disorders such as asthma, cough as well as in dysmenorrhoea and uterine and menstrual spasms and congestion.