High‐intensity sweeteners in espresso coffee: ideal and equivalent sweetness and time–intensity analysis

The efficient substitution of sucrose by a sweetener in beverages requires the application of some sensory techniques. First, one must determine the concentrations of the sweeteners under study, equivalent in sweetness to the ideal sucrose concentration. In addition, it is fundamental to determine which is most similar to sucrose. The objectives of this study were to determine the ideal sweetness for espresso coffee and the equivalent concentrations in sweetness of different sweeteners, as well as characterise the time–intensity profile of each sweetener in relation to sweetness. The sweeteners evaluated were sucralose, aspartame, neotame, a cyclamate/saccharin mixture (2:1) and stevia. The sucrose concentration considered ideal by consumers was 12.5% (w/v), and the equivalent concentrations of the sweeteners were 0.0159% for sucralose, 0.0549% for aspartame, 0.0016% for neotame, 0.0359% for the cyclamate/saccharin mixture and 0.0998% for stevia. The time–intensity analysis indicated that possibly the sweeteners neotame, aspartame and sucralose would be the best substitutes for sucrose.     

Terminal velocity of non-spherical particles falling through a Carreau model liquid

A procedure has been proposed for the estimation of the terminal falling velocity of non-spherical particles moving in a Carreau model fluid in the transition flow region. The procedure is based on a modification of the relationship formerly developed for the fall of spherical particles including the particle dynamic shape factor. The suitability of the proposed procedure has been confirmed by good agreement between experimental and calculated terminal falling velocity data. In the experiments, the terminal falling velocity of short cylinders and rectangular prisms in polymer solutions of different measure of shear thinning and elasticity has been measured.     

A combined queueing network and stochastic Petri-net approach for evaluating the performability of fault-tolerant computer systems

In this paper the performability analysis of fault-tolerant computer systems using a hierarchical decomposition technique is presented. A special class of queueing network (QN) models, the so-called BCMP [4], and generalized stochastic Petri nets (GSPN) [1] which are often used to separately model performance and reliability respectively, have been combined in order to preserve the best modelling features of both.

A conceptual model is decomposed into GSPN and BCMP submodels, which are solved in isolation. Then, the remaining GSPN portion of the model is aggregated with flow-equivalents of BCMP models, in order to compute performability measures. The substitutes of BCMP models are presented by means of simple GSPN constructs, thereby preserving the 1st and 2nd moments of the throughput. A simple example of a data communication system where failed transmissions are corrected, is presented.     

Bulk modification of styrene–butadiene–styrene triblock copolymer with maleic anhydride

The bulk modification of SBS rubber with maleic anhydride in a mixing chamber of a Haake rheomixer was studied. The effect of temperature, maleic anhydride, and benzoyl peroxide concentrations on the grafting efficiency was evaluated. High grafting efficiency was achieved when the ratio of peroxide and maleic anhydride concentration was high. On the other hand, on this condition high insoluble fraction was generated. The addition of a diamine, 4,4′‐diaminediphenylmethane to the reaction mixture minimizes the amount of insoluble polymer. However, the grafted MAH content also decreases. The graft copolymer was characterized by infrared spectroscopy and the grafting extension was determined by titration. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2953–2960, 2002; DOI 10.1002/app.10355     

Different Expression of Mitochondrial and Endoplasmic Reticulum Stress Genes in Epicardial Adipose Tissue Depends on Coronary Atherosclerosis

The aim of our study was to analyze mitochondrial and endoplasmic reticulum (ER) gene expression profiles in subcutaneous (SAT) and epicardial (EAT) adipose tissue, skeletal muscle, and myocardium in patients with and without CAD undergoing elective cardiac surgery. Thirty-eight patients, 27 with (CAD group) and 11 without CAD (noCAD group), undergoing coronary artery bypass grafting and/or valvular surgery were included in the study. EAT, SAT, intercostal skeletal muscle, and right atrium tissue and blood samples were collected at the start and end of surgery; mRNA expression of selected mitochondrial and ER stress genes was assessed using qRT-PCR. The presence of CAD was associated with decreased mRNA expression of most of the investigated mitochondrial respiratory chain genes in EAT, while no such changes were seen in SAT or other tissues. In contrast, the expression of ER stress genes did not differ between the CAD and noCAD groups in almost any tissue. Cardiac surgery further augmented mitochondrial dysfunction in EAT. In our study, CAD was associated with decreased expression of mitochondrial, but not endoplasmic reticulum stress genes in EAT. These changes may contribute to the acceleration of coronary atherosclerosis.     

Effect of Ca2+ and Mg2+ ions on the sintering and spectroscopic properties of cr-doped yttrium aluminum garnet ceramics

In this work, we investigated the effects of Ca²⁺ and Mg²⁺ ions and annealing temperature on the spectroscopic parameters of chromium-doped yttrium aluminum garnet ceramics (Cr:YAG). Samples were obtained with either a separate or a simultaneous addition of calcium and magnesium oxides. To achieve this, aqueous suspensions were prepared using Y₂O₃, Al₂O₃, Cr₂O₃, MgO, and CaO high-purity powders as raw materials. The obtained suspensions were freeze-granulated, pressed into pellets, debinded, and subjected to reactive sintering in vacuum at 1715°C for 6 h. Each material was annealed in air with temperatures between 1300 and 1700°C. Samples were also compared to Cr:YAG ceramics with the addition of silica as a sintering aid. All the materials obtained were then exposed to 445 nm excitation, and emission spectra in the visible and infrared wavelengths were recorded. The results showed that the emission spectra of Cr:YAG ceramics varied according to the annealing conditions: as-sintered samples exhibited strong emissions of around 680 nm and, after air annealing, of around 1400 nm. This phenomenon is attributed to the Cr³⁺→Cr⁴⁺ transition. Samples doped solely with MgO exhibited the highest emission intensity in the infrared region. Thus, Mg²⁺ ions provided the best conversion efficiency of chromium ions.     

Effect of catalysts in the quality of syngas and by-products obtained by co-gasification of coal and wastes. 1. Tars and nitrogen compounds abatement

The aim of this work is to analyse the possibility of using co-gasification technology to process coal mixed with wastes to take profit of its energy content and at the same time to minimize the environmental impact associated with the use of wastes and to diminish the costs of flue gas treatment. The addition to coal of different types of materials, like: pine based waste, petcoke and polyethylene (PE), was not found to give rise to any operational problems, regarding both the feeding system and gasification process and led to higher energy conversions, however, the gas presented higher tars and hydrocarbons content. Several catalysts were tested, such as, dolomite, olivine, nickel and magnesium oxides, zinc oxides and cobalt and molybdenum oxides. Catalyst action was analysed in tars release and also in ammonia compounds reduction. The presence of catalysts allowed increasing hydrogen release, whilst there was a decrease in hydrocarbons and tars contents. A nickel-magnesium oxide was the catalyst that led to the highest reduction in hydrocarbons and tars. This catalyst also led to the lowest NH₃ content in the fuel gas produced, due to the catalyst efficiency in NH₃ destruction.     

Functional properties of collagenous material from chicken feet

Collagenous material was obtained from chicken feet skins and tendons, defatted with ethylic ether and treated with 0.05 M and 0.6 M NaCl solutions. Part of the material was dried at 35 degrees C in a forced air convection oven and another was freeze-dried. The air dried material had 77.2 g/100 g of collagen and the freeze-dried material 76.7 g/100 g. Both dehydrated materials showed the same behaviour for gel formation and cold water holding capacity. The material air dried had higher emulsifying capacity than the freeze-dried one. The collagen of freeze-dried material had higher solubility in 0.5 M acetic acid and water at 70 degrees C than air dried material. Gel strength, emulsion stability and water holding capacity at 60 degrees C were higher for freeze-dried material. The results indicate the potential use of these materials as functional ingredients in meat products.     

Interactional Order and Constructed Ways of Seeing with Touchless Imaging Systems in Surgery

While surgical practices are increasingly reliant on a range of digital imaging technologies, the ability for clinicians to interact and manipulate these digital representations in the operating theatre using traditional touch based interaction devices is constrained by the need to maintain sterility. To overcome these concerns with sterility, a number of researchers are have been developing ways of enabling interaction in the operating theatre using touchless interaction techniques such as gesture and voice to allow clinicians control of the systems. While there have been important technical strides in the area, there has been little in the way of understanding the use of these touchless systems in practice. With this in mind we present a touchless system developed for use during vascular surgery. We deployed the system in the endovascular suite of a large hospital for use in the context of real procedures. We present findings from a study of the system in use focusing on how, with touchless interaction, the visual resources were embedded and made meaningful in the collaborative practices of surgery. In particular we discuss the importance of direct and dynamic control of the images by the clinicians in the context of talk and in the context of other artefact use as well as the work performed by members of the clinical team to make themselves sensable by the system. We discuss the broader implications of these findings for how we think about the design, evaluation and use of these systems.