Dielectric behavior of Cu–GeO<Subscript>2</Subscript> cermet thin films

Capacitance and dielectric loss measurements were carried out using an Al/Cu–GeO₂/Al sandwich structure for 0 to 10 vol% Cu films, 120–400 nm thick, deposited at 0.4–1.5 nm/s in the frequency and temperature range 1–10⁶ Hz and 90–573 K, respectively. The variation of capacitance and dielectric loss with frequency and temperature follows the Goswami and Goswami model. Capacitance decreases slowly with increasing thickness and also varies with the change in deposition rate of the cermet film.     

Full scale thermal testing of latent heat storage in wallboard

Full scale thermal storage tests were conducted in a room lined with PCM wallboard having latent heat storage capacity. The results were compared with those obtained from tests conducted in a similar room lined with ordinary wallboard. The research showed that PCM wallboard can function efficiently as a thermal storage medium which can be applied to peak load shifting, improved use of waste and solar heat as well as more efficient operation of heating and cooling equipment.     

Multi-objective GA with fuzzy decision making for security enhancement in power system

Power system security enhancement is a major concern in the operation of power system. In this paper, the task of security enhancement is formulated as a multi-objective optimization problem with minimization of fuel cost and minimization of FACTS device investment cost as objectives. Generator active power, generator bus voltage magnitude and the reactance of Thyristor Controlled Series Capacitors (TCSC) are taken as the decision variables. The probable locations of TCSC are pre-selected based on the values of Line Overload Sensitivity Index (LOSI) calculated for each branch in the system. Multi-objective genetic algorithm (MOGA) is applied to solve this security optimization problem. In the proposed GA, the decision variables are represented as floating point numbers in the GA population. The MOGA emphasize non-dominated solutions and simultaneously maintains diversity in the non-dominated solutions. A fuzzy set theory-based approach is employed to obtain the best compromise solution over the trade-off curve. The proposed approach has been evaluated on the IEEE 30-bus and IEEE 118-bus test systems. Simulation results show the effectiveness of the proposed approach for solving the multi-objective security enhancement problem.     

The Role of Rigid Residues in Modulating TEM-1 β-Lactamase Function and Thermostability

The relationship between protein motions (i.e., dynamics) and enzymatic function has begun to be explored in β-lactamases as a way to advance our understanding of these proteins. In a recent study, we analyzed the dynamic profiles of TEM-1 (a ubiquitous class A β-lactamase) and several ancestrally reconstructed homologues. A chief finding of this work was that rigid residues that were allosterically coupled to the active site appeared to have profound effects on enzyme function, even when separated from the active site by many angstroms. In the present work, our aim was to further explore the implications of protein dynamics on β-lactamase function by altering the dynamic profile of TEM-1 using computational protein design methods. The Rosetta software suite was used to mutate amino acids surrounding either rigid residues that are highly coupled to the active site or to flexible residues with no apparent communication with the active site. Experimental characterization of ten designed proteins indicated that alteration of residues surrounding rigid, highly coupled residues, substantially affected both enzymatic activity and stability; in contrast, native-like activities and stabilities were maintained when flexible, uncoupled residues, were targeted. Our results provide additional insight into the structure-function relationship present in the TEM family of β-lactamases. Furthermore, the integration of computational protein design methods with analyses of protein dynamics represents a general approach that could be used to extend our understanding of the relationship between dynamics and function in other enzyme classes.     

Contributions to characterization of poly(vinyl chloride)–lignin blends

The present study evaluates the impact of blending organosolv and kraft lignins, which are natural polymer by‐products in the pulp and paper industry, with plasticized poly(vinyl chloride) (PVC) in flooring formulations. Also examined is the impact of replacing dioctyl phthalate, a PVC industry general‐purpose plasticizer, with diethylene glycol dibenzoate (Benzoflex 2‐45), tricresyl phosphate (Lindol), or alkyl sulfonic phenyl ester (Mesamoll) in these formulations. The influence of the different types of lignins and plasticizers on the processibility, thermal, and mechanical properties of the blends is discussed. These properties demonstrate that partial replacement of PVC (20 parts) with different lignins is feasible for some formulations that can be successfully used as matrices for a high level of calcium carbonate filler in flooring products. In addition, the data demonstrate that the presence of certain plasticizers, which interfere with the intramolecular interactions existing in lignins, may allow the lignin molecules to have more molecular mobility. The morphology and the properties of PVC plasticized lignin blends are strongly influenced by the degree and mode of the lignin plasticization and its dispersion within the PVC matrix. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2732–2748, 2006     

Design of Online Vitals Monitor by Integrating Big Data and IoT

In this work, we design a multisensory IoT-based online vitals monitor (hereinafter referred to as the VITALS) to sense four bedside physiological parameters including pulse (heart) rate, body temperature, blood pressure, and peripheral oxygen saturation. Then, the proposed system constantly transfers these signals to the analytics system which aids in enhancing diagnostics at an earlier stage as well as monitoring after recovery. The core hardware of the VITALS includes commercial off-the-shelf sensing devices/medical equipment, a powerful microcontroller, a reliable wireless communication module, and a big data analytics system. It extracts human vital signs in a pre-programmed interval of 30 min and sends them to big data analytics system through the WiFi module for further analysis. We use Apache Kafka (to gather live data streams from connected sensors), Apache Spark (to categorize the patient vitals and notify the medical professionals while identifying abnormalities in physiological parameters), Hadoop Distributed File System (HDFS) (to archive data streams for further analysis and long-term storage), Spark SQL, Hive and Matplotlib (to support caregivers to access/visualize appropriate information from collected data streams and to explore/understand the health status of the individuals). In addition, we develop a mobile application to send statistical graphs to doctors and patients to enable them to monitor health conditions remotely. Our proposed system is implemented on three patients for 7 days to check the effectiveness of sensing, data processing, and data transmission mechanisms. To validate the system accuracy, we compare the data values collected from established sensors with the measured readouts using a commercial healthcare monitor, the Welch Allyn® Spot Check. Our proposed system provides improved care solutions, especially for those whose access to care services is limited.     

Characterisation of sol–gel method synthesised MgZnFe2 O4 nanoparticles and its cytotoxic effects on breast cancer cell line,MDA MB‐231 in vitro

In this study, nanocrystalline magnesium zinc ferrite nanoparticles were successfully prepared by a simple sol–gel method using copper nitrate and ferric nitrate as raw materials. The calcined samples were characterised by differential thermal analysis/thermogravimetric analysis, Fourier transform infrared spectroscopy and X‐ray diffraction. Transmission electron microscopy revealed that the average particle size of the calcined sample was in a range of 17–41 nm with an average of 29 nm and has spherical size. A cytotoxicity test was performed on human breast cancer cells (MDA MB‐231) and (MCF‐7) at various concentrations starting from (0 µg/ml) to (800 µg/ml). The sample possessed a mild toxic effect toward MDA MB‐231 and MCF‐7 after being examined with MTT (3‐[4, 5‐dimethylthiazol‐2‐yl]‐2, 5 diphenyltetrazolium bromide) assay for up to 72 h of incubation. Higher reduction of cells viability was observed as the concentration of sample was increased in MDA MB‐231 cell line than in MCF‐7. Therefore, further cytotoxicity tests were performed on MDA MB‐231 cell line.Inspec keywords: sol‐gel processing, nanoparticles, nanofabrication, magnesium compounds, zinc compounds, toxicology, biological organs, cancer, cellular biophysics, nanomedicine, calcination, differential thermal analysis, Fourier transform infrared spectra, X‐ray diffraction, transmission electron microscopy, particle size, organic compoundsOther keywords: sol‐gel method, cytotoxic effects, breast cancer cell line, MDA MB‐231 in vitro, nanocrystalline magnesium zinc ferrite nanoparticles, copper nitrate, ferric nitrate, raw materials, calcined samples, differential thermal analysis, thermogravimetric analysis, Fourier transform infrared spectroscopy, X‐ray diffraction, transmission electron microscopy, average particle size, cytotoxicity testing, human breast cancer cells, mild toxic effect, 3‐[4,5‐dimethylthiazol‐2‐yl]‐2,5 diphenyltetrazolium bromide) assay, cell viability, MCF‐7, MDA MB‐231 cell line, size 17 nm to 41 nm     

InSAR validation based on GNSS measurements in Bucharest

This research aims to complex validate radar displacement products over Bucharest based on Global Navigation Satellite System or GNSS. Validation was represented by the comparison of the recent TerraSAR-X (TSX) displacement results with field GNSS data. For this purpose, 24 and 27 high-resolution images acquired from the TSX satellite between 2011 and 2014 were processed by Permanent Scatterer Inteferometry (PSI) and Small BASeline Subset (SBAS) – interferometric techniques using synthetic aperture radar (SAR) images. The images were selected from a larger pool of SAR images, after consulting weather databases, which helped eliminate the images acquired under adverse weather conditions. GNSS locations were cross-checked on high-resolution optical images and 21 ground points (including three permanent stations) were selected. All these points were (1) characterized by high coherence on radar images; (2) were on the ground; (3) were situated in large vacant spaces; and (4) far away from radar obstacles such as trees. A major challenge in achieving the research goal was to overcome the lack of permanent stations at the ground level within the area of Bucharest. Instead of permanent stations, our team designed and installed forced centring systems that remained stable over time, eliminating the instalment errors of GNSS receivers. The line-of-site (LOS) components derived from GNSS data have been compared with those of the SAR scatterers closest to the GNSS markers (never coinciding). For each location, the vertical reading was projected in the LOS of the SAR sensor. These readings were compared with the displacement values determined at the locations of permanent scatterers (PSs) within 100 m from the GNSS nodes, by eliminating all scatterers on buildings. The comparison has shown a good agreement.     

Fuzzy Gain Scheduled Continuous Stirred Tank Reactor with Particle Swarm Optimization based PID control Minimizing Integral Square Error

In this paper, a new control scheme, the gain scheduled Particle Swarm Optimization (PSO) based PID, is proposed for a continuous stirred tank reactor (CSTR). CSTR is a highly nonlinear process that exhibits stability in certain regions and instability in some regions. Generally, PID controllers are used in these processes. Tuning of the PID controller is required to guarantee the best performance of the CSTR. The proposed scheme implements the characteristics of the PSO's global optimization to tune the PID's control parameters: k_p, k_i, k_d, to obtain the best control effect by minimizing Integral Square Error online. The PID controller parameters tuned for each region using PSO are gain scheduled using fuzzy control. Fuzzy gain-scheduling is a special form of fuzzy control that uses linguistic rules and fuzzy reasoning to determine the controller parameter transition policy for the dynamic plant subject to large changes in its operating state. Simulation results show the feasibility of using the proposed controller for the control of the dynamic nonlinear CSTR.