Development and characterisation of a Y2Ti2O7-based glass-ceramic as a potential oxidation protective coating for titanium suboxide (TiOx)

A silica-based glass-ceramic, with Y₂Ti₂O₇ as the major crystalline phase, is designed, characterised and tested as an oxidation-protective coating for a titanium suboxide (TiO_x) thermoelectric material at temperatures of up to 600 °C. The optimised sinter-crystallisation treatment temperatures are found to be 1300 °C and 855 °C for a duration of 30 min, and this treatment leads to a glass-ceramic with cubic Y₂Ti₂O₇ and CaAl₂Si₂O₈ as crystalline phases. An increase of ~270 °C in the dilatometric softening temperature is observed after devitrification of the parent glass, thus further extending its working temperature range.Excellent adhesion of the glass-ceramic coating to the thermoelectric material is maintained after exposure to a temperature of 600 °C for 120 h under oxidising conditions, thus confirming the effectiveness of the T1 glass-ceramic in protecting the TiO_x material.     

The Fifth WS/DGAT Enzyme of the Bacterium Marinobacter aquaeolei VT8

Wax esters (WE) belong to the class of neutral lipids. They are formed by an esterification of a fatty alcohol and an activated fatty acid. Dependent on the chain length and desaturation degree of the fatty acid and the fatty alcohol moiety, WE can have diverse physicochemical properties. WE derived from monounsaturated long-chain acyl moieties are of industrial interest due to their very good lubrication properties. Whereas WE were obtained in the past from spermaceti organs of the sperm whale, industrial WE are nowadays mostly produced chemically from fossil fuels. In order to produce WE more sustainably, attempts to produce industrial WE in transgenic plants are steadily increasing. To achieve this, different combinations of WE producing enzymes are expressed in developing Arabidopsis thaliana or Camelina sativa seeds. Here we report the identification and characterization of a fifth wax synthase from the organism Marinobacter aquaeolei VT8, MaWSD5. It belongs to the class of bifunctional wax synthase/acyl-CoA:diacylglycerol O-acyltransferases (WSD). The protein was purified to homogeneity. In vivo and in vitro substrate analyses revealed that MaWSD5 is able to synthesize WE but no triacylglycerols. The protein produces WE from saturated and monounsaturated mid- and long-chain substrates. Arabidopsis thaliana seeds expressing a fatty acid reductase from Marinobacter aquaeolei VT8 and MaWSD5 produce WE. Main WE synthesized are 20:1/18:1 and 20:1/20:1. This makes MaWSD5 a suitable candidate for industrial WE production in planta.     

Influence of accelerated ageing on methacrylate‐based denture resins heterogeneity as viewed by ESR‐spin‐probe method

The electron‐spin‐resonance (ESR) spin‐probe method, was used to study the heterogeneity of denture resins based on poly(methyl methacrylate). Results for three resins processed by microwave energy, conventional curing and cold curing (depending on the curing procedure and exposed to ageing in various environmental conditions) were compared. All three cured resins were stored over the same time (1200 h) in distilled water at ambient temperature and in artificial saliva at 348 K. The temperature‐dependent ESR spectra of a spin probe dispersed in the denture resins are analyzed in terms of line‐shapes and line‐widths. The appearance of two spectral components was taken as an indication of resin heterogeneity. The results reveal that the cold‐cured resin has a lower local density in comparison with microwave and conventionally cured resin. The amount of residual monomer also contributes to the local motion of polymer segments. The change of denture resins exposed to ageing is influenced both by the structure of the original resin and the ageing conditions. Restricted motion of a spin probe incorporated into the acrylic resins exposed to accelerated ageing suggests additional crosslinking of polymer chains. The differences are observed for all the investigated resins, but the highest change is observed with the cold‐cured resin. The ESR results are accompanied by T_g and T_m measurements. Copyright © 2005 Society of Chemical Industry     

Potency comparison of peptidomimetic inhibitors against HIV-1 and HIV-2 proteinases: design of equipotent lead compounds

The results of investigation of haptoglobin (Hp) types in 596 donor blood samples in some towns of Ukraine (Dnepropetrovsk, Kharkov, Odessa, Kiev, Uzhgorod, Zhitomir) are presented. Three normal Hp types (Hp1-1, Hp2-1 and Hp2-2) have been found. The reliable interpopulation differences in the Hp types frequency were not found. On the whole the Hp types frequency in the type Hp1-1 comprised 12.7%. In the type Hp2-1-48.1% and in the type Hp2-2-36.5%. The frequency of the gene Hp1 is 0.38. The frequency of the Hp types and of the gene Hpl in Ukraine is similar to that in population of Eastern Europe and European Part of Russia.     

The problem of the selection of an a posteriori error indicator based on smoothening techniques

This paper addresses the problem of assessing the quality of an a posteriori error estimate of a finite element solution. An error estimate based on local L2-projections is analysed in the case of translation-invariant meshes. It is shown that for general meshes this technique does not lead to an asymptotically exact estimator. The problem is analysed in detail in the one-dimensional setting. It is shown that an asymptotically exact estimator is not the optimal one when the solution is not sufficiently smooth. An optimal estimator for adaptively constructed meshes is given. Finally, a general mathematical framework for the quality assessment of estimators is introduced.     

Design and development of a multichannel potentiometer for monitoring an electrode array and its application in flow analysis

A versatile potentiometer that works with electrode arrays in flow injection and/or monosegmented flow systems is described. The potentiometer is controlled by a microcomputer that allows individual, sequential multiplexed or random accesses to eight electrodes while employing only one reference electrode. The instrument was demonstrated by monitoring an array of seven flow-through ion-selective electrodes for Ag(+) and for three electrodes for Cl(-), Ca(2+) and K(+). The figures of merit of the individual and multiplexed (summed) readings of the electrode array were compared. The absolute standard deviation of the measurements made by summing the potential of two or more electrodes was maintained constant, thus improving the precision of the measurements. This result shows that an attempt to combine the signals of the electrodes to produce a more intense signal in the Hadamard strategy is feasible and accompanied by a proportional improvement in the precision of individual measurements. The preliminary tests suggest that the system can allow for 270 determinations per hour, with a linear range from 1.0 x 10(-2) to 1.0 x 10(-4) mol l(-1) for the three di inverted exclamation markerent analytes. Detection limits were estimated as 3.1 x 10(-5), 3.0 x 10(-6) and 1.0 x 10(-5) mol l(-1) for Cl(-), Ca(2+) and K(+), respectively.     

Low strain rate plasticity of continuously cast carbon steels

By a special plastometric method, the straightening operation of a vertically cast strand of two carbon steels was simulated. The temperature dependence of the low strain rate plasticity of both the steels examined is analogous although caused by very different reasons. As to the plain carbon steel, the amount of ferrite and its location is of prime importance, whereas in the case of eutectoid steel various modes of fracture and the influence of temperature on the relative plasticity of type II MnS inclusions are influencial. To avoid transverse cracking, it seems to be suitable to keep the strand at a rather high temperature (above 900 °C). Temperature cycling seems to be fundamental as to the structural changes taking place in the strand (grain size refining, ferrite fraction if any), whereas analogous influences of straining are more or less inexpressive. Of course, the results obtained are of quality only since the practical and laboratory conditions differ significantly. The knowledge obtained could be applied in regulating the intensity of strand cooling with the aim of lowering the waste portion and improving the surface quality of worked products.     

Correlation of reactivity with chemical structure: Thermal hydrogenation of gas oils

The relationship between chemical structure and reactivity for thermal hydroprocessing was studied for five gas oils derived from Alberta bitumens. Chemical structure was characterized by combining data from ¹ H and ¹³ C nuclear magnetic resonance spectroscopy, class fractionation, and elemental analysis to calculate structural parameters. Thermal hydrotreating was performed in a continuous-flow stirred reactor at 420 and 440°C, 13.9 MPa hydrogen pressure, and 1.5 h¹ LHSV. Conversion of the 343–525°C boiling fraction of the gas oils was correlated with the concentration of naphthenic methylene groups in the feed. Formation of methane and ethane was dependent on the degree of condensation of the aromatic rings in the feed oils. Thermal desulfurization was highly correlated with the amount of saturates in the feed, and the aromaticity of the resin fraction. Hydrogen consumption increased with the aromaticity of the gas oil…     

A method for speeding up beam-tracing simulation using thread-level parallelization

In recent years, the computational power of modern processors has been increasing mainly because of the increase in the number of processor cores. Computationally intensive applications can gain from this trend only if they employ parallelism, such as thread-level parallelization. Geometric simulations can employ thread-level parallelization because the main part of a geometric simulation can be divided into a subset of mutually independent tasks. This approach is especially interesting for acoustic beam tracing because it is an intensive computing task. This paper presents the parallelization of an existing beam-tracing simulation composed of three algorithms. Two of them are iterative algorithms, and they are parallelized with an already known technique. The most novel method is the parallelization of the third algorithm, the recursive octree generation. To check the performance of the multi-threaded parallelization, several tests are performed using three different computer platforms. On all of the platforms, the multi-threaded octree generation algorithm shows a significant speedup, which is linear when all of the threads are executed on the same processor.     

A Glass–Ceramic Derived from High TiO2-Containing Slag: Microstructural Development and Mechanical Behavior

A novel glass–ceramic material was developed from the melt of a TiO₂-containing iron-making slag with additional waste glass. The high percentage (∼20 wt% TiO₂) of this network-modifying oxide has promoted a crystallization of the parent glass, resulting in a fine-grained, homogeneous polycrystalline material with high mechanical properties ( E =120 GPa, flexural strength=∼180 MPa, and Vickers hardness=7 GPa) after a heat treatment at 1100°C for 2 h. The room temperature and elevated temperature fracture toughness were also studied. The main crystalline phases of the glass–ceramic material were of the pyroxene series until heat-treatment temperature reached 1000°C, at which titanium-rich perovskite and armalcolite crystals became the dominant phases. The end material is high-strength, aesthetically acceptable (metallic gray or opaque brown colored), and suitable for structural and architectural applications.