Parameter estimation for a morphochemical reaction-diffusion model of electrochemical pattern formation

The process of electrodeposition can be described in terms of a reaction-diffusion partial differential equation (PDE) system that models the dynamics of the morphology profile and the chemical composition. Here we fit such a model to the different patterns present in a range of electrodeposited and electrochemically modified alloys using PDE constrained optimization. Experiments with simulated data show how the parameter space of the model can be divided into zones corresponding to the different physical patterns by examining the structure of an appropriate cost function. We then use real data to demonstrate how numerical optimization of the cost function can allow the model to fit the rich variety of patterns arising in experiments. The computational technique developed provides a potential tool for tuning experimental parameters to produce desired patterns.     

Extended preservation of raw beef and pork meat by hyperbaric storage at room temperature

Hyperbaric storage (HS) was evaluated as a new food preservation methodology at room temperature (RT) for beef and pork meat, both minced and in pieces, and compared to refrigeration (RF) storage. The meat samples were stored at 50, 75 and 100 MPa and variable RT up to 60 days. HS at 75 and 100 MPa could not only inhibit microbial growth but also inactivate microorganisms. Regarding physicochemical analyses, an overall equal to better pH maintenance in HS samples was achieved, and similar colour differences between HS and RF were observed. Generally, similarities in moisture content and drip loss between HS (mostly 75 and 100 MPa) and RF were detected (tendency for lower values in the former and higher values in the latter for the higher pressure level). Protein solubility revealed a decrease of sarcoplasmic protein values during storage with a pressure level dependency in some samples.     

Response coding and visuomotor transformation in the Simon task: The role of action goals.

Manual responses can be defined by differing response parameters. Any of them may generate a Simon effect. For all those response parameters, the same implementation of the Simon effect (in terms of subserving mechanism) is assumed. In 3 experiments, subjects had to respond with either fingers or sticks. Temporal properties of the Simon effect changed with response parameters relevant in a task. The Simon effect for manual responses decayed. For stick responses, in which the action goal differed from the anatomical mapping of the acting hand, a sustained Simon effect was observed. However, if the action goal for stick responses was not instrumental for selecting the correct response, the Simon effect decayed. The findings are consistent with the notion of different mechanisms involved in generating a Simon effect. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

On the observation of inductive high-frequency impedance behaviour during the electrodeposition of Au—Sn alloys

Inductive high-frequency impedance behaviour is often observed in metal electrodeposition systems. This behaviour is typically attributed to equipment limitations or non-idealities in the cell set-up and electrical connections. Such instrumental artefacts would nevertheless be relevant to a frequency range which is expected to be well above that in which inductive behaviour is in fact observed (down to a few tens of Hz). In this paper some results on an acidic Au—Sn electrodeposition system are reported. Electrochemical impedance and potentiostatic transients were measured. These results suggest that the high-frequency inductive behaviour may be related to metal nucleation processes. A correlation is proposed between the pseudo-inductive potentiostatic nucleation transients and the pseudo-inductive behaviour of the impedance spectra.     

Fibroblast protein profile analysis highlights the role of oxidative stress and vitamin K recycling in the pathogenesis of pseudoxanthoma elasticum

Pseudoxanthoma elasticum (PXE) is a genetic disorder associated to mutations in the ABCC6 gene; however, the pathogenetic mechanisms leading to elastic fibre calcifications and to clinical manifestations are still unknown. Dermal fibroblasts, directly involved in the production of the extracellular milieu, have been isolated from healthy subjects and from patients affected by PXE, cultured in vitro and characterized for their ability to produce reactive oxygen species, for structural and functional properties of their cell membranes, for changes in their protein profile. Data demonstrate that oxidative stress has profound and endurable consequences on PXE fibroblast phenotype being responsible for: reduced levels of global DNA methylation, increased amount of carbonylated proteins and of lipid peroxidation products, altered structural properties of cell membranes, modified protein expression. Data shed new light on the pathogenetic pathways in PXE, by identifying a network of proteins affecting elastic fibre calcification through inefficient vitamin K recycling, and highlight the role of differentially expressed proteins as targets for validating the efficacy of future therapeutic strategies aiming to delay and/or revert the pathologic phenotype of PXE fibroblasts. Moreover, data open new perspectives for investigating PXE-like phenotypes in the absence of ABCC6 mutations.     

Viscosity virtual sensor to control combustion in fossil fuel power plants

Thermo-electrical power plants utilize fossil fuel oil to transform the calorific power of fuel into electric power. An optimal combustion in the boiler requires the fuel oil to be in its best conditions. One of fuel's most important properties to consider is viscosity. Viscosity has influence on the optimal combustion between fuel and air. Hardware viscosity meters for fuel oils are expensive and unreliable to operate in power plant conditions. Chemical laboratory measures viscosity accurately with special apparatus, but they cannot be used in a real time process. This paper describes the development of a virtual sensor that estimates fuel oil viscosity in the combustion process of a power plant. A virtual sensor or soft sensor is a computer program that estimates the value of a certain variable based on related measurements and a model of the process where the variable participates. In this project, a probabilistic model is constructed using automatic learning algorithms with historical data and experts' advice. The learning and validation experiments are described and discussed. The virtual sensor is installed in the Tuxpan Power Plant in Veracruz, Mexico.     

Can Brazil replace 5% of the 2025 gasoline world demand with ethanol?

Increasing use of petroleum, coupled with concern for global warming, demands the development and institution of CO₂ reducing, non-fossil fuel-based alternative energy-generating strategies. Ethanol is a potential alternative, particularly when produced in a sustainable way as is envisioned for sugarcane in Brazil. We consider the expansion of sugarcane-derived ethanol to displace 5% of projected gasoline use worldwide in 2025. With existing technology, 21 million hectares of land will be required to produce the necessary ethanol. This is less than 7% of current Brazilian agricultural land and equivalent to current soybean land use. New production lands come from pasture made available through improving pasture management in the cattle industry. With the continued introduction of new cane varieties (annual yield increases of about 1.6%) and new ethanol production technologies, namely the hydrolysis of bagasse to sugars for ethanol production and sugarcane trash collection providing renewable process energy production, this could reduce these modest land requirements by 29–38%.     

Improving pulse sequences for 3D diffusion-ordered NMR spectroscopy: 2DJ-IDOSY

An improved pulse sequence for the 3D DOSY experiment 2DJ-DOSY, using diffusion encoding internal to the parent 2DJ spectroscopy sequence (2DJ-IDOSY), is presented. The diffusion-encoding pulses are used to enforce the desired coherence transfer pathway, reducing the minimum experimental time by at least a factor of 4, as compared to existing techniques, and approximately doubling the signal-to-noise ratio for small molecules. The new sequence is demonstrated on a simple mixture and on a complex sample with a high dynamic range (port wine). The principle of internal diffusion encoding can be applied with profit to a range of other 3D DOSY experiments.     

Pathway and single gene analyses of inhibited Caco-2 differentiation by ascorbate-stabilized quercetin suggest enhancement of cellular processes associated with development of colon cancer

The aim was to investigate mechanisms contributing to quercetin's previously described effects on cell-proliferation and -differentiation, which contradicted its proposed anticarcinogenic potency. In a 10-day experiment, 40 microM quercetin stabilized by 1 mM ascorbate reduced Caco-2 differentiation up to 50% (p < 0.001). Caco-2 RNA from days 5 and 10, hybridized on HG-U133A2.0 Affymetrix GeneChips(R), showed 1,743 affected genes on both days (p < 0.01). All 14 Caco-2 differentiation-associated genes showed decreased expression (p < 0.01), including intestinal alkaline phosphatase, that was confirmed technically (qRT-PCR) and functionally (enzyme-activity). The 1,743 genes contributed to 27 pathways (p < 0.05) categorized under six gene ontology (GO) processes, including apoptosis and cell-cycle. Genes within these GO-processes showed fold changes that suggest increased cell-survival and -proliferation. Furthermore, quercetin down-regulated expression of genes involved in tumor-suppression and phase II metabolism, and up-regulated oncogenes. Gene expression changes mediated by ascorbate-stabilized quercetin were concordant with those occurring in human colorectal carcinogenesis ( approximately 80-90%), but were opposite to those previously described for Caco-2 cells exposed to quercetin without ascorbate ( approximately 75-90%). In conclusion, gene expression among Caco-2 cells exposed to ascorbate-stabilized quercetin showed mechanisms contrary to what is expected for a cancer-preventive agent. Whether this unexpected in vitro effect is relevant in vivo, remains to be elucidated.     

Ripening‐related changes in the cell walls of olive (Olea europaea L.) pulp of two consecutive harvests

Olive fruits, harvested in two consecutive seasons at green, cherry and black stages, were used to study compositional changes in the cell walls during ripening. Ripening‐related changes in both harvests were characterised mainly by an increase in the solubilisation of pectic and hemicellulosic polysaccharides, an increase in the relative amount of arabinose in pectic polysaccharides and a decrease in the degree of methylesterification of pectic polysaccharides. Further to degrading processes, the data obtained suggest the synthesis of new polysaccharides. The analysis of olive cell wall phenolics showed mainly the presence of p‐coumaric acid, which increased in one harvest, whereas in the other the values did not differ. The samples of the second harvest, although presenting green, cherry and black colours, had less distinct ripening characteristics than those of the previous harvest. Different activity levels of polyphenol oxidase, polygalacturonase and pectin methylesterase might have contributed to the differences observed between the two harvests. The results showed the distinct extension of ripening‐related changes in the cell walls of the two harvests, indicating that the olive colour, although characteristic of the stage of ripening, cannot be strictly used for its evaluation and definition. Copyright © 2006 Society of Chemical Industry