Corroles as receptors in liquid membrane electrodes and their potentiometric response towards salicylic acid

Here, we report on the application of corroles as analytically active compounds in liquid membrane electrodes (ISE) that are sensitive towards salicylic acid and salicylate.The potentiometric signals generated by corrole-incorporated ISEs strongly depend on the pH of the aqueous sample solution and the membrane composition, such as the presence of lipophilic sites. Corrole incorporating ISEs are characterised by a low detection limit (4.0 × 10⁻⁵ M) and a wide linear range (4.0 × 10⁻⁵ to 5.3 × 10⁻³ M). Also, they are free from interference versus other organic anions.The mechanism of the generation of the potentiometric signals of corrole incorporating ISEs in the presence of salicylate anion, as well salicylic acid, will be discussed.     

Continuous separation,with microfluidics,of the components of a ternary mixture: from vacuum to purge gas pervaporation

The general objective of this paper is to investigate the separation, with microfluidics, of the components of a ternary mixture, when using vacuum or purge gas pervaporation. The ternary mixture considered is a mixture of methanol (MeOH), water (H₂O) and hydrogen peroxide (H₂O₂). In a previous work (Ziemecka in Lab Chip 15:504–511, 2015), we presented the proof of concept of a microfluidic device, which was able to partially separate MeOH from the other components of such a mixture, by using vacuum pervaporation. Here, our goal is to optimize the operation of this device, by considering vacuum pervaporation, but also purge gas pervaporation. First, we provide a mathematical model of the device. This model is used to discuss the influence of the operating parameters on the device operation. To apply this model to the considered mixture, we determined the MeOH and H₂O permeability coefficients of PDMS membranes prepared from different concentrations of the curing agent. The model is then successfully compared to experimental data. The model and the experiments show that high efficiencies can be reached for both vacuum and purge gas pervaporation, provided a fine-tuning of the operating parameters. For instance, a good efficiency of the vacuum pervaporation is reached at high temperature and low pressure. For purge gas pervaporation, it is reached for low temperature and high pressure.     

A sensitivity analysis of powder forging processes

The purpose of this paper is to analyze the sensitivity problems in metal forming of rigid-visco-poroplastic materials. A repressing powder forging process is analyzed. Parameter sensitivity, material derivative, and control volume approaches to shape sensitivity analysis are presented, analyzed, and compared. Discretization of the continuum expressions is presented. The numerical solutions for parameter sensitivity in forging problems have been described. Numerical examples concerning simple compression test of cylindrical porous specimen are presented.     

High resolution SEM characterization of nano‐precipitates in ODS steels

The performance of the present‐day scanning electron microscopy (SEM) extends far beyond delivering electronic images of the surface topography. Oxide dispersion strengthened (ODS) steel is on of the most promising materials for the future nuclear fusion reactor because of its good radiation resistance, and higher operation temperature up to 750°C. The microstructure of ODS should not exceed tens of nm, therefore there is a strong need in a fast and reliable technique for their characterization. In this work, the results of low‐kV SEM characterization of nanoprecipitates formed in the ODS matrix are presented. Application of highly sensitive photo‐diode BSE detector in SEM imaging allowed for the registration of single nm‐sized precipitates in the vicinity of the ODS alloys. The composition of the precipitates has been confirmed by TEM‐EDS.     

Effect of polymer structure on the molecular dynamics and thermal behavior of poly(allyl acetoacetate) and copolymers

In this paper, dielectric and calorimetric studies of the small-molecule glass former allyl acetoacetate monomers as well as its newly synthetized homopolymer and copolymers with different styrene composition were performed in both the liquid and glassy states. The molecular dynamics studies by the broadband dielectric spectroscopy and the stochastic temperature modulated differential scanning calorimetry enabled us to explore relaxation processes of examined materials in the wide frequency range. We found that the copolymers reveal two co-existing glass transitions characterized by the glass transition temperatures, which are very close to those of the corresponding homopolymers. These results suggest that the copolymers exhibited some sequences of acetoacetate units with a microphase-separated morphology in agreement with the value of reactivity ratio previously determined. We investigated effects of copolymerization compositions on the glass transition temperature, the isobaric fragility index, the dielectric and calorimetric intensity, and the dynamic heterogeneity on the glass transitions of the materials.     

Microscopic structure and energy transfer of vacancy-related defect pairs with Erbium in wide-gap semiconductors

Electron Paramagnetic Resonance (EPR) measurements of Erbium-doped 6H-SiC and wurtzite GaN samples are compared to total energy calculations based on density functional theory (DFT) in order to investigate the well-known luminescence of the intra 4f-shell transition at 1540 nm, useful in light-emitting diodes or lasers. The highly correlated f-electrons of Erbium (Er) have been treated within an LDA+U approach. We discus how pairs of an Er-ion with intrinsic defects can be responsible in GaN and SiC for relaxing the selection rules for intra 4f-shell transitions: In GaN our EPR investigation indicates the presence of a nitrogen vacancy next to the Er-ion. Through controlled generation of intrinsic defects in 6H-SiC single crystals and EPR measurements we support the corresponding model in SiC, that predicts defect pairs of an Er-ion and a neighboring carbon vacancy. In other words, low-energy irradiation seems to be a promising way to enhance the Er-luminescence desired for device applications.     

Hydroxyalkoxy derivatives of oxamic acid: polyol substrates for polyurethane foams

BACKGROUND: The work reported aimed at obtaining hydroxyalkoxy derivatives containing oxalamidoester groups starting from oxamic acid (OA) substrate. These derivatives were then used for the synthesis of polyurethane foams. RESULTS: The hydroxyalkoxy derivatives were obtained by reaction of OA with 6 to 15 molar excess of ethylene carbonate (1,3‐dioxolane‐2‐one) or propylene carbonate (4‐methyl‐1,3‐dioxolane‐2‐one). The products obtained have good thermal stability and possess suitable physical properties for use as substrates for foamed polyurethanes. CONCLUSION: The rigid polyurethane foams obtained from the hydroxyalkoxy derivatives of OA possess enhanced thermal stability and good mechanical properties in comparison with traditional polyurethane foams. Copyright © 2009 Society of Chemical Industry