Solvent effect modelling of isocyanuric products synthesis by chemometric methods

Chemometric tools were used to generate the modelling of solvent e inverted exclamation markects on the N-alkylation of an isocyanuric acid salt. The method proceeded from a central composite design applied on the Carlson solvent classification using principal components analysis. The selectivity of the reaction was studied from the production of different substituted isocyanuric derivatives. Response graphs were obtained for each compound and used to devise a strategy for solvent selection. The prediction models were validated and used to search for the best selectivity for the reaction system. The solvent most often selected as the best for the reaction is the N,N-dimethylformamide.     

Picosecond photodiffraction in semiconductor multiquantum wells and microcavities

We study the transient gratings photogenerated in the picosecond regime in three families of structures, namely : - structures of thickness in the order of one micron, including quantum wells (GaAs/GaAlAs, CdTe/ CdZnTe). A transmission modulation due to the electric field has been observed. We show that, in accordance with our calculations, this modulation is screened faster than 10 ps at a fluence of a few µJ/cm2. - A structure including GalnAs/GalnAsP MQWS in a cavity. This structure shows a top diffraction efficiency of 2.5 × 10-² at 1.55 µm for an energy of excitation in the order of 100 µJ/cm2. The diffraction efficiency exhibits several oscillations due to Fabry-Pårot effects. By introducing cavity effects in our model, we show that the diffraction efficiency is amplified by more than a factor 2 with respect to the no-cavity case. Calculations show that the diffraction efficiency may reach 6 × 10-² around 1.625 µm, for a front mirror reflectivity of 90 %. - Structures including bulk GaAs microcavities. The risetime is lower or in the order of 1 ps while the diffraction efficiency attains 1 %, with an average power of 4 mW (i.e. an energy of 2 µJ/cm²/pulse), compatible with a commutation of packets at 80 MHz.     

Further characterization of the alpha-actinin-actin interface and comparison with filamin-binding sites on actin

The interaction between alpha-actinin and actin was further characterized using natural and synthetic peptides of actin together with anti-actin antibodies of known specificity. We demonstrated that two alpha-actinin binding sequences on actin are located within residues 112-125 and 360-372. Each peptide was shown to directly bind alpha-actinin and was able to dissociate the alpha-actinin-actin complex using solid phase binding assays and cosedimentation experiments. Taking into account the three-dimensional structure of actin (Kabsch, W., Mannherz, H. G., Suck, D., Pai, E. F., and Holmes, K. C. (1990) Nature 347, 37-44), we postulate that these two segments, proximal in the actin structure, are part of the same site. In addition, we compared these two segments with those recently found for filamin (Méjean, C., Lebart, M. C., Boyer, M., Roustan, C., and Benyamin, Y. (1992) Eur. J. Biochem. 209, 555-562), Egan, S., Stewart, M., Stossel, T. P., Kwiatkowski, D. J., and Hartwig, J. H. (1990) J. Cell Biol. 111, 1089-1105), and concluded that the two actin-binding proteins interact with closely spaced or overlapping but not identical sequences of actin subdomain 1.     

Tube Diameter and Height Influence on the Ozonation Operating Conditions with a U-Tube

Ozone has been used for a number of years in water treatment for viricidal and bactericidal action, as well as for its oxidizing properties. Energy consumption during its use depends on the performance of the ozone generators, but also on the ozone transfer efficiency from the gas phase to the liquid phase. Therefore, it is important to use a contactor with a high transfer efficiency.A new ozonation reactor has been developed: the Deep U-Tube (DUT). This reactor works under pressure, which increases the saturation concentration of ozone at equilibrium (C ). and creates a great turbulence, which breaks the gas bubbles and increases the interfacial area of exchange. Further, this new contactor has a piston hydraulic behavior in the liquid phase, which leads to a very great efficiency and to a better reduction for all reaction kinetics.     

In vitro comparison of hepatic metabolism of 9cis-11 trans and 10trans-12cis isomers of CLA in the rat

Hepatic metabolism of the two main isomers of CLA (9cis-11 trans, 10trans-12cisC_18∶2) was compared to that of oleic acid (representative of the main plasma FA) in 16 rats by using the in vitro method of incubated liver slices. Liver tissue samples were incubated at 37°C for 17h under an atmosphere of 95% O₂/5%CO₂ in a medium supplemented with 0.75 mM of FA mixture (representative of circulating nonesterified FA) and with 55 μM [1-¹⁴C]9cis-11 trans C_18∶2, [1-¹⁴C]10trans-12cis C_18∶2, or [1-¹⁴C]oleate. The uptake of CLA by hepatocytes was similar for both isomers (9%) and was three times higher (P<0.01) than for oleate (2.6%). The rate of CLA isomer oxidation was two times higher (49 and 40% of incorporated amounts of 9cis-11 trans and 10trans-12 cis, respectively) than that of oleate (P<0.01). Total oxidation of oleate and CLA isomers into [¹⁴CO₂] was low (2 to 7% of total oxidized FA) compared to the partial oxidation (93 to 98%) leading to the production of [¹⁴C] acid-soluble products. CLA isoemrs escaping from catabolism were both highly desaturated (26.7 and 26.8%) into conjugated 18∶3. Oleate and CLA isomers were mainly esterified into neutral lipids (30%). They were slowly secreted as parts of VLDL particles (<0.4% of FA incorporated into cells), the extent of secretion of oleate and of 10trans-12 cis being 2.2-fold higher than that of 9cis-11 trans (P<0.02). In conclusion, this study clearly showed that both CLA isomers were highly catabolized by hepatocytes, reducing their availability for peripheral tissues. Moreover, more than 25% of CLA escaping from catabolism was converted into conjugated 18∶3, the biological properties of which remain to be elucidated.     

乳源酵母Pichia fermentans的抗氧化特性

为得到新的天然抗氧化剂,采用DPPH法和抑制脂质过氧化法对11株来源于牛乳的酵母菌抗氧化活性进行测定,包括他们的完整细胞和无细胞提取物,发现Pichia fermentans BY5有较好的抗氧化活性.分析不同条件下P.fermentans BY5细胞提取物的抗氧化活性,发现培养基的起始pH值、培养时间、培养基种类对酵母菌的抗氧化活性和蛋白质含量影响显著(P0.05);而抗氧化活性与蛋白质含量显著相关(P0.01).将酵母BY5在pH6的麦芽培养基中培养2d后清除DPPH活性可达60%;在pH6的YPD培养基中培养4d后抑制脂质过氧化能力达到74%.     

Flux pinning effect of cubic equiaxed morphology and its Ti stabilizing in Nb<Subscript>3</Subscript>Sn superconductors

Two sets of internal-Sn Nb3Sn superconducting strands were fabricated through RRP method, one with 2 wt% of Ti alloyed in Sn core and the other just pure Sn. Four reaction temperatures of 650℃, 675℃, 700℃ and 725℃ and 128 h duration were applied for A15 phase formation heat treatment after Cu-Sn alloying procedure of 210℃/50 h + 340℃/25 h. For the heat-treated coil samples, transport non-Cu JC was examined through standard 4-probe technique and phase microstructure was observed by means of Field Emission Sc...     

Scheduling evacuation operations

In this paper, we consider a large-scale evacuation problem after a major disaster. The evacuation is assumed to occur by means of a fleet of buses, thus leading to scheduling the evacuation operations by buses [(bus evacuation problem (BEP)]. We propose time-indexed formulations as well as heuristic algorithms such as greedy algorithms and a matheuristic. This matheuristic uses the former formulation to improve the best solution obtained by the greedy heuristics. In computational experiments, we analyze and evaluate the efficiency of the proposed solution algorithms.