噪声与低噪声设计的探讨（上篇）

噪声是许多信号处理系统的基本制约因素.同样,它是许多电子设计,特别是接口电路的主要制约条件.在测试与测量、医学成像和高速数据通信等方面的行业趋向都需要越来越高的信息密度.与此同时,半导体工艺的进步能实现更高的数据处理速度和功能密度,但却要降低工作电源电压,由此降低信号幅度.结果是,加大了系统设计对模拟前端噪声性能进行管理的压力.     

造就产品更牢靠的电路保护方法

几乎所有电子OEM领域的功能密度正在日益增长，使宝贵的硅片更易于受到真实世界的损害。采取花钱较少的简单措施，就可以保护您的产品和您公司的声望，还能在极端情况下保护您的客户。     

Nanostructured polymer blends: Synthesis and structure

Nanostructured polymer blends prepared via anionic ring opening polymerizations of cyclic monomers in the presence of a pre-made polymer melt exhibit a number of special properties over traditional polymer blends and homopolymers. Here, we report on a simple and versatile method of in situ polymerization of macrocyclic carbonates in the presence of a maleic anhydride polypropylene (mPP) matrix and a surface-active compatibilizer (i.e. PC grafted onto a mPP backbone generated in situ) to yield a micro- and nanostructured polymer blends consisting of a polycarbonate (PC) minor phase, and a polypropylene (PP) major phase. By varying the processing conditions and concentration of the macrocyclic carbonate it was possible to reduce the size of the PC dispersions to an average minor diameter of 150 nm. NMR and TEM characterizations indicate that the PC dispersions do not influence crystal content in the PP phase. Overall, the results point to a simple strategy and versatile route to new polymeric materials with enhanced benefits.     

Seeking the truth about ad hoc join costs

In this paper, we re-examine the results of prior work on methods for computing ad hoc joins. We develop a detailed cost model for predicting join algorithm performance, and we use the model to develop cost formulas for the major ad hoc join methods found in the relational database literature. We show that various pieces of “common wisdom” about join algorithm performance fail to hold up when analyzed carefully, and we use our detailed cost model to derive op timal buffer allocation schemes for each of the join methods examined here. We show that optimizing their buffer allocations can lead to large performance improvements, e.g., as much as a 400% improvement in some cases. We also validate our cost model's predictions by measuring an actual implementation of each join algorithm considered. The results of this work should be directly useful to implementors of relational query optimizers and query processing systems. Edited by M. Adiba. Received May 1993 / Accepted April 1996     

From dissonance to disidentification: Selectivity in the self-affirmation process.

Two studies examined the relationship between the content of a self-threat and the attractiveness of available self-affirmations (C. M. Steele, 1988). After self-threat was induced by means of a cognitive dissonance procedure, participants' choices for affirmations were examined in order to explore whether the attractiveness of a given affirmation depends on its relevance to the threatened domain of the self-concept. The authors hypothesized that when faced with a threat to a specific self-conception or standard, individuals may forego affirmations within the threatened self-concept domain in favor of affirmations of unrelated, compensatory domains. Both studies supported this hypothesis and further suggested that such selective self-affirmation can lead individuals to modify their self-concepts by identifying with self-aspects that justify dissonant behavior and by disidentifying with the standards that such behavior violates. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Effects of a Nd—Fe—B magnetic filler on the crystallization of poly(phenylene sulfide)

The crystallization of poly(phenylene sulfide) (PPS) in a polymer–magnetic Nd—Fe—B powder suspension was studied. Isothermal crystallization behavior was analyzed by way of differential scanning calorimetry, and the kinetics were described via the Avrami equation. The Avrami parameters and the crystallization times were strongly affected by both the particle size and the presence of a coupling agent coated on the filler particles. The small Nd—Fe—B particles exhibited long induction and half‐times, whereas the large particles tended to have short crystallization times. Particles ranging from 38 to 150 μ appeared to have similar crystallization times and to have no significant change in the value of Avrami index with melt crystallization temperature. As a result of these analyses, the dynamic mechanical properties were determined to correlate the fundamental polymer crystallization characteristics and the physical properties of the PPS binder. The enhancement of the wetting of the filler to the binder was promoted through the coupling agent, as confirmed by dynamic mechanical testing performed on the samples. The storage modulus typically decreased because of the presence of the uncoated small particles. Conversely, the loss modulus was enhanced because of the presence of the coated small particles in the PPS binder. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1091–1102, 2002     

A simplified method for the preparation of succinimidyl carbonate polyethylene glycol for coupling to proteins

An improved method for the activation of polyethylene glycol with commercially available succinimidyl carbonate is described. The activated polyethylene glycol was coupled to proteins in high yield.     

重构与模式

《Refactoring to Patterns》曾荣获2005年《软件开发》杂志图书通用类的效率大奖(Productivity Award)。书中介绍了以模式为导向的重构方法的理论和实践,记录了潜藏在20多个基于模式的设计转换之下的思想方法和设计步骤,对于模式差异以及如何以尽可能简单的方式实现模式提出了颇有见解的观点。《Refactoring to Patterns》中文版将由人民邮电出版社编译出版,本文节选了部分内容让读者先睹为快,限于篇幅,略有删节。     

Using mechatronics to teach mechanical design and technical communication

It is commonly accepted that hands-on experiences increase both learning and enjoyment during coursework. Mechatronics projects provide both interesting and relevant hands-on experiences for a wide range of topics including design processes, basic mechatronics concepts, technical communication, and working in a group environment. ME2110: Creative Decisions and Design at Georgia Tech integrates mechatronics and technical communication into a sophomore level mechanical design class. This paper describes the course in detail, highlighting the course goals and layout, tools provided to the students, industry involvement, and the main challenges of administering such a course.     

Enclosing all solutions of two-point boundary value problems for ODEs

The two-point boundary value problem (TPBVP) occurs in a wide variety of problems in engineering and science, including the modeling of chemical reactions, heat transfer, and diffusion, and the solution of optimal control problems. A TPBVP may have no solution, a single solution, or multiple solutions. A new strategy is presented for reliably locating all solutions of a TPBVP. The method determines narrow enclosures of all solutions that occur within a specified search interval. Key features of the method are the use of a new solver for parametric ODEs, which is used to produce guaranteed bounds on the solutions of nonlinear dynamic systems with interval-valued parameters and initial states, and the use of a constraint propagation strategy on the Taylor models used to represent the solutions of the dynamic system. Numerical experiments demonstrate the use and computational efficiency of the method.