The effect of grain size, strain rate, and temperature on the mechanical behavior of commercial purity aluminum

Commercial purity aluminum AA1050 was subjected to equal channel angular extrusion (ECAE) that resulted in an ultrafine-grained (UFG) microstructure with an as-received grain size of 0.35 μm. This UFG material was then annealed to obtain microstructures with grain sizes ranging from 0.47 to 20 μm. Specimens were compressed at quasi-static, intermediate, and dynamic strain rates at temperatures of 77 and 298 K. The mechanical properties were found to vary significantly with grain size, strain rate, and temperature. Yield stress was found to increase with decreasing grain size, decreasing temperature, and increasing strain rate. The work hardening rate was seen to increase with increasing grain size, decreasing temperature, and increasing strain rate. The influence of strain rate and temperature is most significant in the smallest grain size specimens. The rate of work hardening is also influenced by strain rate, temperature, and grain size with negative rates of work hardening observed at 298 K and quasi-static strain rates in the smallest grain sizes and increasing rates of work hardening with increasing loading rate and grain size. Work hardening behavior is correlated with the substructural evolution of these specimens.     

MULTIMEDIA NETWORKING A Leading-Edge Communication Technology

The realization of digital multimedia's full business potential requires networking. This article discusses the value-added benefits to the corporation of networked multimedia as well as the choice of architectures and technologies needed to deliver multimedia networking solutions.     

What results when firms implement practices: The differential relationship between specific practices, firm financial performance, customer service, and quality.

Previous research on organizational practices is replete with contradictory evidence regarding their effects. Here, the authors argue that these contradictory findings may have occurred because researchers have often examined complex practice combinations and have failed to investigate a broad variety of firm-level outcomes. Thus, past research may obscure important differential effects of specific practices on specific firm-level outcomes. Extending this research, the authors develop hypotheses about the effects of practices that (a) enable information sharing, (b) set boundaries, and (c) enable teams on 3 different firm-level outcomes: financial performance, customer service, and quality. Relationships are tested in a sample of observations from over 200 Fortune 1000 firms. Results indicate that information-sharing practices were positively related to financial performance 1 year following implementation of the practices, boundary-setting practices were positively related to firm-level customer service, and team-enabling practices were related to firm-level quality. No single set of practices predicted all 3 firm-level outcomes, indicating practice-specific effects. These findings help resolve the theoretical tension in the literature regarding the effects of organizational practices and offer guidance as to how to best target practices to increase specific work-related outcomes. Implications for theory, research, and practice are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Multifamily Housing Characteristics and Tenant Satisfaction

This paper examines the long-term impact of structural features and physical amenities on the residential satisfaction of renters in multifamily housing. A cumulative logit analysis of 7,206 rented multifamily units in the 2005 American Housing Survey indicates that features creating separated space (additional room, bathroom, garage/carport, or balcony/patio) were associated with significantly higher satisfaction, even when holding total unit area constant. Conversely, violation of space separation by noise intrusion through walls, floors, or ceilings created dramatically negative effects. Other amenities such as a fireplace, disposal, or dishwasher had no statistically significant impact. Tracking a cohort of 5,170 rented multifamily units from 1997 to 2005 revealed somewhat similar effects on the satisfaction trajectory of residents during this period. More bathrooms, bedrooms, and other rooms, as well as the presence of a balcony/patio were associated with satisfaction improvements. Analyzing cohort units undergoing modifications during the tracking period revealed that the addition of a bathroom or central air conditioning had the clearest impact on satisfaction, followed by the addition of a balcony/patio, other room, dishwasher, or garage/carport.     

Subcontinuations

Continuations have proven to be useful for implementing a variety of control structures, including exception handling facilities and breadth-first searching algorithms. However, traditional continuations are not useful in the presence of concurrency, because the notion of the rest of the computation represented by a continuation does not in general make sense. Traditional continuations can also be difficult to use in nonconcurrent settings, since their global nature is sometimes problematic. This article presents a new type of continuation, called asubcontinuation. Just as a traditional continuation represents the rest of a computation ¿from a given point in the computation, a subcontinuation represents the rest of asubcomputation ¿from a given point in the subcomputation. Subcontinuations may be used to control tree-structured concurrency by allowing nonlocal exits to arbitrary points in a process tree and allowing the capture of a subtree of a computation as a composable continuation for later use. In the absence of concurrency the localized control achievable with subcontinuations makes them more useful than traditional continuations.     

Accelerated aging of extruded dielectric power cables. I. Controland monitoring methodology

An improved accelerated cable life test is described. Through the use of programmable logic controllers (PLCs), very precise and consistent control of the accelerated aging process has been achieved. A computer has been utilized to make continuous real-time acquisition and storage of key operating parameters possible. This precise control and monitoring methodology has permitted the study of the synergistic effects of voltage and temperature on the accelerated aging of full-sized cables in the laboratory     

Inertia-friction welding of SiC-reinforced 8009 aluminium

Inertia-drive friction welding (IFRW) of an 8009 Al alloy (Al-8.5 Fe-1.7 Si-1.3 V, wt%) reinforced with 11 volume per cent SiC particles (8009/SiC/11_p) has been investigated. Inertia-drive friction welds were made with constant energy at two levels of axial force. The microstructures of the base material and the welds were characterized using optical and scanning electron microscopy, while the mechanical properties were evaluated using microhardness and tensile testing. Examination of weld sections revealed that the hot deformation experienced during welding produced a homogenized microstructure with a uniform distribution of SiC particles along the bond line. No evidence of a chemical reaction between the SiC and the matrix was found in any of the welds, but cracking of some of the larger SiC particles was observed in the base material as well as in the IFR welds. The average microhardness of the various heat-and-deformation affected zones (HDZs) of the welds did not vary greatly from that of the base material, and no weld induced weak regions were discerned. The room-temperature (RT) tensile strength of the IFR welds exceeded 90 per cent of the base material. The weld tensile specimens failed at the outer edge of the HDZ for all of the welds tested. The fracture surface of the 8009 matrix of tensile samples for both the base material and the welds exhibited a dimpled appearance indicating a ductile failure, while fracture through the SiC appeared to occur in a brittle fashion. IFRW has proven effective in joining 8009/SiC/11_p with little loss in RT hardness and tensile properties.