Diporphyrin tweezer for multichannel spectroscopic analysis of enantiomeric excess

Chiral 1,1’-binaphthyl-linked diporphyrin ‘tweezers’ (R)-1/(S)-1 and the corresponding zinc(II) complexes (R)-2/(S)-2 were prepared as chiral host molecules, and their utility for chiral analyses (especially enantiomeric excess (ee) determinations) were evaluated. Tris(1-n-dodecyl)porphyrins were used for the first time as the interacting units. Host capabilities of the diporphyrin tweezers were investigated by titrations with (R,R)- and (S,S)-cyclohexane-1,2-diamine (CHDA). The host molecules could be used as multichannel probes of ee by using UV-vis, circular dichroism (CD), fluorescence emission and ¹H nuclear magnetic resonance (¹H-NMR) methods. Chiral configurations could also be differentiated using CD or ¹H-NMR spectroscopy. All three optical techniques give good resolution of ee with reasonable sensitivity considering the low concentrations used (ca. 10⁻⁶ mol·L⁻¹). The ee determination of CHDA enantiomers using NMR spectroscopy is also possible because of the reasonably well separated resonances in the case of (R,R)- and (S,S)-CHDA. Non-metallated (R)-1/(S)-1 hosts could not be used to detect chiral information in a strongly acidic chiral guest. This work demonstrates the utility of 1,1’-binapthyl-linked chiral hosts for chiral analysis of ditopically interacting enantiomers.     

再生玻璃作为辅助胶凝材料制备ECC的力学及变形性能

为考察再生玻璃作为辅助胶凝材料对ECC的影响,开展了一系列力学性能试验,研究其抗折与抗压强度、弯曲性能和单轴拉伸性能.结果 表明:采用再生玻璃作为辅助胶凝材料可显著提高ECC的抗压强度,同时抗折强度略有降低;再生玻璃作为辅助胶凝材料或细骨料制备的ECC在弯曲荷载下可呈现出明显的多缝开裂和假应变硬化特征;通过良好的配合比设计,再生玻璃粉仅作为辅助胶凝材料制备的ECC平均极限拉伸应变接近3％,具备良好的变形能力.     

消渴健脾胶囊对2型糖尿病小鼠降血糖作用研究

为研究消渴健脾胶囊对2型糖尿病小鼠的降血糖作用,取75只昆明种雄性小鼠,除正常对照组10只外,其余小鼠腹腔注射链脲佐菌素建立2型糖尿病小鼠模型,将造模成功的糖尿病小鼠随机分为模型组,阳性组(盐酸二甲双胍150.00 mg·kg~(-1)),消渴健脾胶囊低(238.88 mg·kg~(-1))、中(477.75 mg·kg~(-1))、高(955.50 mg·kg~(-1))剂量组,每组10只,正常对照组和模型组给予0.1 mL·(10 g体重)~(-1)蒸馏水,连续给药28 d后,测定小鼠体重、空腹血糖(FBG)值、糖耐量(GT)、糖化血清蛋白(GSP)水平及血清胰岛素(INS)水平。结果表明,与模型组比较,给药28 d后,消渴健脾胶囊各剂量组小鼠体重显著增加,差异具有统计学意义(P0.05);消渴健脾胶囊各剂量组小鼠FBG值显著降低,差异具有统计学意义(P0.05或P0.01);消渴健脾胶囊中、高剂量组小鼠GT显著降低,差异具有统计学意义(P0.05或P0.01);消渴健脾胶囊各剂量组小鼠GSP水平显著降低,差异具有统计学意义(P0.05或P0.01);消渴健脾胶囊高剂量组小鼠INS水平显著升高,差异具有统计学意义(P0.05)。消渴健脾胶囊对链脲佐菌素所致2型糖尿病小鼠有一定的治疗作用。     

汽车空调的操作和应用分析

2013年国内汽车产销量超过2000万台,汽车正在快速进入中国的千家万户,但大部分车主还缺乏对汽车空调知识的了解,夏天又是空调故障多发期,如果车主了解相关汽车空调知识,在实际应用中会达到事倍功半的效果,因此介绍了一般车型的空调结构、工作原理以及特殊气候下的调节。     

Strain rate dependency and fragmentation pattern of expanding warheads

For the characterization of the behaviors of a metal material in events like expanding warheads, it is necessary to know its strength and ductility at high strain rates, around 104e105/s. The flyer plate impact testing produces the uniform stress and strain rates but the testing is expensive. The Taylor test is relatively inexpensive but produces non-uniform stress and strain fields, and the results are not so easily inferred for material modeling. In the split-Hopkinson bar(SHB), which may be used in compression, tension and torsion testing, the strain rates never exceeds 103/s. In the present work, we use the expanding ring test where the strain rate is 104e105/s. A streak camera is used to examine the expanding ring velocity, and a water tank is used to collect the fragments. The experimental results are compared with the numerical simulations using the hydrocodes AUTODYN, IMPETUS Afea and a regularized smooth particle(RSPH) software. The number of fragments increases with the increase in the expansion velocity of the rings. The number of fragments is similar to the experimental results. The RSPH software shows much the same results as the AUTODYN where the Lagrangian solver is used for the ring. The IMPETUS Afea solver shows a somewhat different fragmentation characteristic due to the node splitting algorithm that induces pronounced tensile splitting.     

Performance of insulated FRP-strengthened concrete flexural members under fire conditions

This paper presents the results of fire resistance tests on carbon fiber-reinforced polymer (CFRP) strengthened concrete flexural members, i.e., T-beams and slabs. The strengthened members were protected with fire insulation and tested under the combined effects of thermal and structural loading. The variables considered in the tests include the applied load level, extent of strengthening, and thickness of the fire insulation applied to the beams and slabs. Furthermore, a previously developed numerical model was validated against the data generated from the fire tests; subsequently, it was utilized to undertake a case study. Results from fire tests and numerical studies indicate that owing to the protection provided by the fire insulation, the insulated CFRP-strengthened beams and slabs can withstand four and three hours of standard fire exposure, respectively, under service load conditions. The insulation layer impedes the temperature rise in the member; therefore, the CFRP–concrete composite action remains active for a longer duration and the steel reinforcement temperature remains below 400°C, which in turn enhances the capacity of the beams and slabs.     

建筑材料生产企业O形橡胶密封圈及其应用(一)

介绍了O形橡胶密封圈的常用密封构造和密封机理,详细论述了O形橡胶密封圈用沟槽的设计制造、密封失效的原因、解决途径及其应用。