Zu einem Phänomen der Lochkorrosionsbegrenzung bei hochlegierten Sonderedelstählen und NiCrMo-Legierungen in Chloridlösungen

On a phenomenon of the limitation of pitting corrosion at high alloyed special stainless steels and NiCrMo-alloys in chloride solutions Testing the pitting corrosion resistance of high alloyed special stainless steels and NiCrMo-alloys in chloride solutions there was observed a limitation of the pitting corrosion range toward more positive potentials. Above this limitation, the so-called pitting corrosion limitation potential, the pit initiation by all means is prevented, but the growth of pits which had been initiated before in the pitting corrosion range not necessarily comes to a stop. Therefore current density-potential curves which are obtained by downward polarization after an initial potential jump into the transpassive region and chronopotentiostatic tests are more suitable to investigate this phenomenon than cyclic polarization measurements and potentiostatic alteration tests. There is indicated a dependence of this phenomenon on temperature. The phenomenon of a limitation of the pitting corrosion range toward more positive potentials has been found until now at alloy 926, alloy 31, alloy 28, alloy 59 and alloy C-276.     

Relation of follicular dendritic reticulum cells to Reed-Sternberg cells of Hodgkin's disease with emphasis on the expression of CD21 antigen

Based on observations of 66 cases, in which tissues were specially processed to optimize the simultaneous preservation of cell membrane antigens and morphology, we provide evidence in favor of a relationship between follicular dendritic reticulum cells (FDRC) and Reed-Sternberg (RS) cells of Hodgkin's disease (HD) other than the lymphocyte predominance subtype. RS cells were intimately related to the FDRC network (75% of cases), and the expression of CD21 antigen was frequent (41% of cases). Exclusive expression of CD21 antigen was found in 11 cases of HD, while the expression of other B-cell-associated markers (CD19, CD20, CD22) was both variable and inconsistent. The expression of T-cell antigens (CD3, CD4, CD8) was rare. Null phenotype of RS cells was observed in 27 of 66 cases (41%). Epstein-Barr virus (EBV) nucleic acids were found in 34 of 66 (51.5%) cases. Double labeling techniques showed the presence of EBV-positive RS cells within the FDRC network. A non-B-cell origin of RS cells was supported by the differential expression of EBV latent antigens in HD (latent membrane protein+, EB nuclear antigen 2-), which is unusual in EBV-driven lymphoblastoid cell lines and EBV-positive B-cell lymphomas. FDRC and RS cells are known to share morphological traits (binucleated cells), and both cell types possess Fc receptor for IgG. The hypothesis is further backed by the findings of CD15 antigen expression by occasional RS-like dysplastic FDRC in Castleman's disease (five cases), which is characterized by hyperplasia of FDRC. Whether FDRC might be the only cells involved in the conversion to RS cells by the loss or gain of antigens remains to be determined.     

Kinetik der polykondensation von natriumsulfidhydrat und 1,4-dichlorbenzol zu poly(thio-1,4-phenylen)

The kinetics of the polycondensation of sodium sulfide hydrate and 1,4-dichlorobenzene to poly(thio-1,4-phenylene) in 1-methyl-2-pyrrolidone as solvent was studied in a differential scanning calorimeter at temperatures between 220 and 280°C. This polycondensation shows an autocatalytic behavior and the kinetics can be modelled by a first order reaction up to complete conversion. This is explained by the low solubility of sodium sulfide in l-methyl-2-pyrrolidone. The concentration of sodium sulfide is regarded as being constant during the whole course of the reaction. The autocatalytic effect can be explained by the increase of the condensation rate constant at the beginning of polycondensation due to the higher reactivity of the oligomers compared to the monomers. The number- and the weight-average molecular weight of the products formed during the course of the polycondensation can be modelled by means of stochastic methods. A simple model with only two different rate constants of the condensation process is assumed. The concentration of sodium sulfide in the reactive phase is found to be 2–5% of the value of dichlorobenzene at the beginning of the reaction and remains constant nearly until the end of polycondensation.     

A Study of Surface Deformation during Wire‐Rod Rolling of High Speed Steels using Experimental and Computational Techniques

The evolution of surface defects during shape rolling of high‐speed steel billets is studied using longitudinal surface defects prepared by machining and welding. The reduction of the defects during rolling in a production mill is compared to the total area reduction of the billets. Samples are collected after pass 4, 6, 8, 14, 19 and the final pass, 28, representing the finished 5.5mm wire. By inspecting the cross sections, the rotation of the billets from pass to pass is evaluated. Results from FE simulations on solid billets are compared to the experimental results. Generally, simulations predict less reduction than observed experimentally. In most cases cracks reduce most effectively followed by carbon steel welds and stainless steel welds.     

ADAPTIVE POLE-PLACEMENT CONTROL OF A CONTINUOUS POLYMERIZATION REACTOR

A simulation of the polymerization of methylmethacrylate in a CSTR is adaptively controlled by two types of pole-placement algorithms. The strongly nonlinear polymerization process, exhibiting multiple steady states, presents difficult control problems for conventional feedback controllers. The performance of an adaptive explicit SISO controller and that of an adaptive implicit multivariable controller are compared and evaluated as applied to this process. The plant is identified by a recursive least squares estimator. Modifications made to the estimation algorithm help to maintain adequate closed-loop results. A simple warm-up procedure is introduced that successfully initializes the controller and estimator during plant start-up. Good servo and regulatory control are achieved by both pole-placement schemes.