SiGe VCOs operating up to 88 GHz, suitable for automotive radar sensors

VCOs fully integrated in an SiGe preproduction technology are presented. By cutting interconnection lines a wide frequency range can be covered, up to 88.4 GHz. Special effort has been made to meet the demands for 77 GHz automotive radar. In the corresponding tuning range from 75.3 to 79.6 GHz, an output power of about 11 dBm (with -2.2 dBm potential measurement uncertainty) was achieved for each of the two complementary outputs, i.e. in total 14 dBm. The phase noise is about -94 dBc/Hz at 1 MHz offset frequency.     

Monolithic integration of a 5.3 GHz regenerative frequency divider using a standard bipolar technology

A monolithic microwave frequency divider IC with an operating range of 1.4?5.3 GHz was developed and fabricated in a standard bipolar technology. The circuit operates on the principle of `regenerative frequency division?. Compared to the most popular divider concepts based on a master-slave D-flip-flop, an almost twice as high input frequency can be divided, provided that the same technology is used. A further advantage is the low power consumption.     

Locked discrete event systems: How to model and how to unlock

To model qualitative aspects of discrete event systems, i.e., the order of the events is of sole importance, we use a triple consisting of the set of all possible events (the alphabet), the set of all behavior (possible strings of events), and the set of all tasks (completed behavior). We use this view to model synchronous as well as asynchronous connection of systems. Moreover, it is easy to define notions like deadlock and livelock in this view. We give a method to construct a second system that, in connection with the original system, gets rid of its deadlock and/or livelock. A state-space representation is introduced. In this representation computations can be done effectively.     

Solid-state13C NMR investigations of insoluble deposits in aromatic bitters

Insoluble deposit formed in aromatic bitters produced from alcoholic extracts of about 30 different botanical materials with a dry matter content of 1.67% and 38 vol% alcohol and a characteristic astringent flavour was shown by¹³C NMR spectroscopy to be a coprecipitate of plant polyphenols, proteins and carbohydrates. The polyphenols in the deposit were flavonoids such as anthocyanidins and anthocyanins, with glucose as the principal carbohydrate and derivatives of cinnamic acid. The deposit formation in the aromatic bitters was accelerated by addition of the radical initiator 2,2′-azobis(2-amidinopropane) dihydrochloride or by addition of hydrogen peroxide in combination with iron(III) nitrate and ascorbic acid as a Fenton reagent. Polymerization of catechin and pelargonidin was shown, in model experiments, to be oxidative and to be accelerated by exposure to light. A mechanism involving oxidative polymerization of polyphenols followed by coprecipitation of polymerized polyphenols, proteins and carbohydrates is proposed for formation of deposits in alcoholic beverages of the bitters type.     

13 Gb/s Si-bipolar AGC amplifier IC with high gain and wide dynamicrange for optical-fiber receivers

A complete linear automatic-gain-control (AGC) amplifier for a 10 Gb/s optical-fiber link was integrated on a single chip, using a Si-bipolar production technology with f_T≈22 GHz. It is characterized by a high gain of 37 dB, linear operation over a wide input dynamic range of 47 dB, a maximum data rate of 13 Gb/s, and a gain-independent 3-dB cut off frequency of 10 GHz. The circuit consumes 850 mW at a single supply voltage of -6.5 V. It can be operated in both a single-ended and differential mode. A novel 50-Ω input matching circuit with only small return loss is used. Two separate output buffers with a constant output voltage swing of 500 mV_p-p allow splitting up the output signal without use of external components     

Wide-band symmetrical analog multiplier IC for coherentoptical-fiber receivers operating up to 10 Gb/s

A versatile analog four-quadrant multiplier IC with large bandwidth (DC to 6 GHz and 10 Gb/s) and large dynamic range is presented. It was mainly developed for differential-phase-shift-keying (DPSK) phase demodulator and polarization diversity receivers in coherent optical-fiber transmission systems. The circuit consumes 450 mW and only needs a single power supply of -5 V. The circuit principle used allows exact symmetry with respect to both linear inputs, which reduced multiplication errors. In the intended application, especially, the time jitter and the offset voltage of the output pulse patterns are reduced to negligible values. The IC was realized in a 1.25-μm double-polysilicon bipolar technology     

Notch sensitivity of thermoset and thermoplastic laminates loaded in tension

Inplane tensile fracture of unnotched and notched thermoset graphite-epoxy and thermoplastic graphite-PEEK composite laminates is examined. Both fibre-dominated quasi-isotropic and matrix dominated ±45 angle-ply layups were investigated.Classical lamination theory predictions of elastic and strength properties of unnotched specimens are compared with experiments. Several notched geometries, i.e. centre-notched, double-edge notched and open-hole specimens subjected to tensile loading to fracture were examined. The notched strength of the quasi-isotropic laminates was analysed by a damage zone model, where damage around the notch is represented by an equivalent crack with cohesive force acting between the crack surfaces.Good agreement between experimental and calculated strength was observed for the graphite-epoxy laminates which failed in a collinear manner. For the graphite-PEEK laminates discrepancies between predicted and experimental strength are related to observed deviations from collinear crack growth. The angle-ply graphite-PEEK laminates showed larger notch sensitivity than the corresponding graphite-epoxy, probably due to less degree of stress relieving damage formation around the notch.     

Storage life of frozen salmonoids Effect of light and packaging conditions on carotenoid oxidation and lipid oxidation

Summary The combined effect of oxygen transmission of packaging material and of exposure to light with different spectral distribution on the oxidative degradation of carotenoids and lipids in frozen salmonoids has been characterized in a storage experiment with steaks of rainbow trout. The degradation of the carotenoid astaxanthin, as followed by HPLC analysis and tristimulus colorimetric measurement, was sensitive to the radiant flux density of UV light and less sensitive to the oxygen transmission rate of the packaging material, in agreement with previous findings for photooxidation of carotenoids in food model systems. This is in contrast to the lipid oxidation, which was found to be dependent on the accessability of oxygen rather than on exposure to UV light. Formation of peroxides in the product culminated after 3 months of storage (up to 8.4 mEq kg^–1 oil), and preceded the formation of thiobarbituric-acid-reactive substances. The product in packaging material with a high oxygen transmission rate (60 cm³ m^–2 bar^–1 per 24 h) reached a level of approximately 5 mol malonaldhyde/kg^–1 product, when stored exposed to standard fluorescent light or fluorescent light with a high UV component. Rancid taste was not detected by sensory evaluation for any of the products after 6 months of storage, whereas a bitter taste was noted for the product exposed to UV light.

---

Die Haltbarkeit von Lachsforellen Einfluß von Licht und Verpackung auf die Carotenoid- und Fettoxydation

Zusammenfassung Der kombinierte Effekt von Sauerstoffdurchgang durch Verpackungsmaterial und der Lichteinwirkung verschiedener spektraler Verteilung auf den oxidativen Abbau der Carotinoide und Fette in gefrorenen Lachsforellen wurde in einem Lagerungsversuch untersucht. Der Abbau des Carotenoids Astaxanthin wurde mit HPLC undTristimulus-Calorimetrie beobachtet, und war empfindlich gegenüber UV-Licht und weniger empfindlich gegenüber der Sauerstoffdurchlässigkeit der Verpackung, was mit früheren Ergebnissen für Photooxidation der Carotinoide in Modellsystemen übereinstimmt. Dies widerspricht der Fettoxidation, die mehr von Sauerstoffzugang abhängig ist als von der Entwicklung des UV-Lichtes. Die Bildung von Peroxiden des Produktes kuliminierte nach 3monatiger Lagerung (bis 8,4 meq/kg Öl) und ging der Bildung von Thiobarbitursäure-aktiven Substanzen voraus. Das Produkt im Material mit hohem Sauerstoffdurchgang (60 cm³ m^–2 bar^–1 pro 24 h), das bei normalen fluorescierendem Licht oder bei fluorescierendem Licht mit hohem UV-Anteil aufbewahrt wurde, erreichte einen TBS-Wert von ungefähr 5 mol Malonaldehyd/kg Fleisch. Ein ranziger Geschmack wurde durch sensorische Bewertung nach 6monatiger Lagerung nicht erkannt, wohl aber ein bitterer Geschmack bei dem UV-Licht ausgesetzten Proben.

     

Time-optimal control of linear systems

A useful procedure for the solution of time-optimal control problems for linear systems is presented. The procedure consists of a direct search method for the determination of the best diagonal weighting matrix used in a Liapunov function for the system. The control policy chosen to minimize the forward difference of the Liapunov function yields very rapid approach to the origin. Numerical results are presented for a linear six-plate gas absorber to show the feasibility of the proposed method. Even in the presence of disturbances the system can be taken to and kept at the vicinity of the origin.     

Emission of excited potassium species from an industrial iron catalyst for ammonia synthesis

The angular dependence of potassium emission-desorption is studied from a fused iron catalyst of the type used for ammonia synthesis. The excited species (K^*, K _n ^* , etc.) and positive ions K⁺ have strongly different angular distributions. The bilobular distribution measured for ion desorption is concluded to be either due to excited atoms, so-called Rydberg atoms, or excited clusters. Both types of species have to desorb from the edges of the sample and become field ionized and deexcited just outside the sample, as reported in previous studies on an iron oxide catalyst. The peak in the normal direction measured for excited species is due to excited cluster formation outside the catalyst surface. Similarities with previous results for other catalysts are observed. The possibility that the promoter function of potassium in the ammonia synthesis is due to excited species is pointed out.On leave from Faculty of Chemistry, Jagiellonian University, Ingardena 3, 30-060 Cracow, Poland.