The role of metacognitive listening strategies awareness and podcast-use readiness in using podcasting for learning English as a foreign language

The aim of this study was to investigate the role of English as Foreign Language (EFL) learners’ metacognitive listening strategies awareness and podcast-use readiness in using podcasting technology for learning English as a foreign language. One hundred and forty-one EFL students completed Metacognitive Awareness Listening Questionnaire (MALQ) that assessed their awareness and perceived use of listening strategies in five components including planning-evaluation, directed attention, person knowledge, mental translation, and problem solving. They also completed a questionnaire that assessed their readiness to use podcasting in terms of familiarity, attitude, and experience. Information on participants’ frequency of podcast use for learning English, frequency of the internet use, and digital device ownership was also obtained. The result of the analysis revealed that podcasting use was significantly related to metacognitive listening strategies awareness in general and its entire components except mental translation strategies while the strongest correlation was found with problem solving strategies (r = .49, p < 0.01). Podcasting use was also found to be significantly related to perceived podcast-use readiness and internet use hours. Further, multiple regressions showed that perceived podcast-use readiness, problem solving, and person knowledge -in order of power prediction- were good predictors of podcasting use for learning English as a foreign language.     

A review on assessment of fatigue strength in welded studs

Welding is one of the most important and highly developed joining methods; nevertheless unwanted side effects occur like thermal strains and altering of certain material properties induced by heating and melting. These effects lead to distortions and high residual stresses which should be kept to a minimum. To minimize distortion, various strategies are being developed. Stud welding is widely used in steel structures, power plants, and ship buildings due to the significantly technology including highest quality of production processes by continuous electrical control and the efficiency of such a process. Therefore, varying the heat input typically will affect the material properties including yield strength, tensile strength, hardness, and notch toughness in the stud arc welding. Well-defined heat sources offer a reproduced heat input into a highly localized area. The fatigue strength of stud welding has been investigated by performing welding process and microstructural observations. This paper is going to discuss the influence of heat input on the structural changes in stud arc welding.     

Computational modelling of industrial pulp stock chests

Agitated pulp stock chests are the most widely used mixers in pulp and paper manufacture. Stock chests are used for a number of purposes, including attenuation of high‐frequency disturbances in pulp properties (such as mixture composition, fibre mass concentration, and suspension freeness) and are designed using semi‐empirical rules based largely on previous experience. Tests made on both laboratory and industrial‐scale pulp chests indicate that they are subject to non‐ideal flows, including channelling and creation of dead zones. In the present work, a commercial computational fluid dynamic (CFD) software (Fluent) is used to model two industrial pulp stock chests. The first chest is rectangular, agitated using a single side‐entering impeller, and feeds a mixture of chemical pulps at 3.5% mass concentration (C_m) to a papermachine. The second chest has rectangular geometry, with a mid‐feather wall used to direct suspension flow through a U‐shaped trajectory past four side‐entering impellers. This chest is used to remove latency from a C_m = 3.5% thermomechanical pulp suspension ahead of stock screening. For CFD computations, pulp rheology was described using a modified Hershel–Buckley model. Steady‐state simulations were made corresponding to process conditions during mill tests. The calculated steady‐state flows were then used to determine the dynamic response of the virtual chests and then compared with experimental measurements and found to agree reasonably well. The computed flow fields provided insight into mixing processes occurring within the chests, showing cavern formation around the impellers (which reduced the agitated volume available for mixing). Mass‐less particle tracking, using the steady‐state flow field, gave insight into the stagnant regions and bypassing zones created in the vessels. This paper discusses difficulties encountered in characterising the mixing (both experimentally and computationally) and the limitations of the industrial data.     

Static and adaptive routing in ISL networks from a constellation perspective

This paper presents and evaluates different routing schemes in a constellation of non‐geostationary satellites. Routing decisions may or may not take into account the state of the network. While taking into account the network state is likely to bring an improvement in both the network utilization and the quality of service, it also makes the routing architecture more complex. This paper proposes to evaluate the advantages and disadvantages of these different design approaches for routing. Copyright © 2002 John Wiley & Sons, Ltd.     

Evaluation of the guaranteed handover algorithm in satellite constellations requiring mutual visibility

Handover is one of the key subjects in maintaining the quality of service offered by non‐geostationary constellation systems. As the satellite coverage moves according to the satellite motion, the continuity of a call must be maintained from one satellite to another. In case the handover fails, the call is dropped, resulting in a quality of service degradation. This paper proposes several handover procedures that guarantee a successful handover in non‐geostationary satellite constellations requiring mutual visibility. Reservations at next satellite must be done in advance in order to avoid call drops. Several handover performance metrics (such as call blocking probability, call dropping probability and handover rate) are presented for each procedure as a function of traffic load variation. Comparisons of handover performance metrics between these procedures are presented as well. Copyright © 2003 John Wiley & Sons, Ltd.     

ATM-based routing in LEO/MEO satellite networks with intersatellitelinks

An asynchronous transfer mode (ATM)-based concept for the routing of information in a low Earth orbit/medium Earth orbit (LEO/MEO) satellite system including intersatellite links (ISLs) is proposed. Specific emphasis is laid on the design of an ATM-based routing scheme for the ISL part of the system. The approach is to prepare a virtual topology by means of virtual path connections (VPCs) connecting all pairs of end nodes in the ISL subnetwork for a complete period in advance, similar to implementing a set of (time dependent) routing tables. The search for available end-to-end routes within the ISL network is based on a modified Dijkstra (1959) shortest path algorithm (M-DSPA) capable of coping with the time-variant topology. With respect to the deterministic time variance of the considered ISL topologies, an analysis of optimization aspects for the selection of a path at call setup time is presented. The performance of the path search in combination with a specific optimization procedure is-by means of extensive simulations-evaluated for example LEO and MEO ISL topologies, respectively     

Improving nonlinear electronic circuit simulation

The resolution of systems of stiff differential equations is required in the transient analysis of a large electronic network simulation. Resultant stability problems and the methods used in solving first order stiff nonlinear differential equations are reviewed. An improved algorithm is presented using BDF formulas given by Brayton et al. IEEE Vol 60 (1972) pp 98–108 and has been implemented in the IMAG electronic circuit simulation program. Reducing computer time has been achieved by controlling the number of Newton iterations, the number of integration steps, and the number of Jacobian matrix evaluations without producing additional errors or instability phenomena. Experimental results are shown.