Modeling aviation baggage screening security systems: a case study

Aviation security protects vital national interests, as well as passengers and aircraft. Key components of an aviation security system include baggage and passenger screening devices and operations. Determining how and where to assign (deploy) such devices can be quite challenging. Moreover, even after such systems are in place, it can be difficult to measure their effectiveness. This paper describes how discrete optimization models can be used to address these questions, based on three performance measures that quantify the effectiveness of airport baggage screening security device systems. These models are used to solve for optimal airport baggage screening security device deployments considering the number of passengers on a set of flights who have not been cleared using a security risk assessment system in use by the Federal Aviation Administration (i.e., passengers whose baggage is subjected to screening), the number of flights in this set, and the size of the aircraft for such flights. Several examples are provided to illustrate these results, including an example that uses data available from the Official Airline Guide.     

All‐hexahedral element meshing: automatic elimination of self‐intersecting dual lines

There has been some degree of success in all‐hexahedral meshing. Standard methods start with the object geometry defined by means of an all‐quadrilateral mesh, followed by the use of the combinatorial dual to the mesh in order to define the internal connectivities among elements. For all of the known methods using the dual concept, it is necessary to first prevent or eliminate self‐intersecting (SI) dual lines of the given quadrilateral mesh. The relevant features of SI lines are studied, giving a method to remove them, which avoids deforming the original geometry. Some examples of resulting meshes are shown where the current meshing method has been successfully applied. Copyright © 2002 John Wiley & Sons, Ltd.     

An improved method for magnetic identification and localization of cracks in conductors

A SQUID magnetometer can be used to measure the magnetic field produced by flaws in a two-dimensional, conducting plate carrying a current. Identification of the flaw-induced magnetic field is difficult because of the large magnetic field associated with the edges of the plate and the current in the leads that connect the plate to the power supply. We have developed a technique by which the wire and edge fields can be cancelled prior to mapping the magnetic field. In this technique, a similar unflawed conducting sheet is placed adjacent to the flawed plate, with a connection between the sheet and the plate at one edge, and with the opposite edges of the sheet and of the plate connected to the two conductors of a coaxial cable. Thus, an applied current will flow along one conductor of the cable, across the cancelling sheet, cross into the flawed plate, return along the plate, and then return to the power supply along the other conductor of the coaxial cable. As a result of this geometry, there is no magnetic field from the lead-in wires because they are coaxial, and the magnetic field due to the edges of the plate is cancelled by the opposing magnetic field of the edges in the adjacent sheet. The extent of cancellation is determined primarily by the separation between the plate and the cancelling sheet, by the thickness of the plate, and by macroscopic inhomogeneities in their electrical conductivities.     

Attentional cues in chronic schizophrenia: Abnormal disengagement of attention.

M. I. Possner's 1980 reaction time (RT) paradigm was used to examine the engagement and disengagement operations of visual selective attention in patients with schizophrenia. In the 1st experiment 14 medicated, chronic schizophrenic Ss (diagnosed by criteria of the Diagnostic and Statistical Manual of Mental Disorders [DSM-I]), and 15 age-matched normal and control Ss made a speeded response to a target preceded by a valid, and invalid, or no cue. Control Ss showed the expected advantage and disadvantage in RT for valid and invalid cues, which suggests intact engagement and disengagement operations. For schizophrenic Ss, valid cues also enhanced RT, but invalid cues did not slow RT. Similar results were found in the 2nd experiment. The failure of unpredictable, invalid cues to inhibit RT in chronic schizophrenia may be related to an abnormality in the disengagement operation of selective attention. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Development of the meshless finite volume particle method with exact and efficient calculation of interparticle area

The Finite Volume Particle Method (FVPM) is a meshless method based on a definition of interparticle area which is closely analogous to cell face area in the classical finite volume method. In previous work, the interparticle area has been computed by numerical integration, which is a source of error and is extremely expensive. We show that if the particle weight or kernel function is defined as a discontinuous top-hat function, the particle interaction vectors may be evaluated exactly and efficiently. The new formulation reduces overall computational time by a factor between 6.4 and 8.2. In numerical experiments on a viscous flow with an analytical solution, the method converges under all conditions. Significantly, in contrast with standard FVPM and SPH, error depends on particle size but not on particle overlap (as long as the computational domain is completely covered by particles). The new method is shown to be superior to standard FVPM for shock tube flow and inviscid steady transonic flow. In benchmarking on a viscous multiphase flow application, FVPM with exact interparticle area is shown to be competitive with a mesh-based volume-of-fluid solver in terms of computational time required to resolve the structure of an interface.     

A comparison of six solvents for the extraction of jojoba seed

Summary Data are presented which show the effects of different solvents on the yield and properties of liquid wax fromSimondsia chinensis (jojoba) and on the characteristics of the hydrogenated waxes obtained from the liquid waxes. Three reagent grade solvents, carbon tetrachloride, benzene, and isopropyl alcohol, and three commercial grade solvents, heptane, hexane, and tetrachloroethylene, were evaluated as extractants for the liquid wax from jojoba. Soxhlet-type of extractions were carried out under conditions in which the solvent was the only significant variable. Four of the solvents extracted essentially the same amount of material from the seed while isopropyl alcohol extracted significantly more material and tetrachloroethylene significantly less. Obviously the difficulties involved in separating the solids recovered from the isopropyl alcohol extraction preclude its use as the extracting solvent for jojoba wax. The density of the liquid waxes varies from 0.8631 to 0.8648; the waxes from the tetrachloroethylene and hexane extractions had the lowest value and the wax from isopropyl alcohol the highest. In each case, regardless of the solvent used, a precipitate developed in the liquid wax after it had been desolventized and stored for 7–10 days. Hydrogenation of clear fractions and precipitate containing fractions of these liquid waxes showed that the precipitate had no apparent effect upon the melting point or hardness of the resulting solid wax. Some of the liquid waxes required a longer hydrogenation time to attain an iodine value of about 1. At this iodine value all of the solid waxes had melting points between 66 and 68°C. Hardness values of all the solid waxes as measured by the Trionic hardness gauge were 90. One of the laboratories of the Southern Utilization Research and Development Division, Agricultural Research Service, U. S. Department of Agriculture.     

Design issue of a new iCub head sub-system

I am presenting a new design for the head sub-system of the humanoid robot iCub. ICub is a humanoid robot platform that has been conceived as a result of the development of the European Project RobotCub. Mechanical problems of the current head sub-system of iCub robot have been studied in order to figure out improvements for a new design. The feasibility of the new design has been checked through dynamic simulations of the head operations. The successful results have shown plots with curve evolutions of smooth shapes and suitable values of important kinematic and dynamic parameters of the head structure.     

Activated carbons as potentially useful non-nutritive additives to prevent the effect of fumonisin B1 on sodium bentonite activity against chronic aflatoxicosis

Aflatoxin B₁ (AFB₁) and fumonisin B₁ (FB₁) are mycotoxins that often co-occur in feedstuffs. The ingestion of AFB₁ causes aflatoxicosis in humans and animals. Sodium bentonite (NaB), a cheap non-nutritive unselective sequestering agent incorporated in animal diets, can effectively prevent aflatoxicosis. Fumonisins are responsible for equine leukoencephalomalacia and porcine pulmonary oedema, and often have subclinical toxic effects in poultries. Fumonisin B₁ and aflatoxin B₁ are both strongly adsorbed in vitro on sodium bentonite. Co-adsorption studies, carried out with a weight ratio of FB₁ to AFB₁ that mimics the natural occurrence (200:1), showed that FB₁ greatly decreases the in vitro ability of NaB to adsorb AFB₁. The ability of two activated carbons to adsorb FB₁ was also investigated. Both carbons showed high affinity for FB₁. A complex behaviour of the FB₁ adsorption isotherms with pH was observed. In vitro results suggest that under natural contamination levels of AFB₁ and FB₁, a mixture of activated carbon and sodium bentonite might be potentially useful for prevention of sub-acute aflatoxicosis.     

Modification of the La0.6Sr0.4CoO3 coating deposited on ferritic stainless steel by spray pyrolysis after oxidation in air at high temperature

The behaviour of La_0.6Sr_0.4CoO₃ applied to ferritic stainless steel (AISI 430) by spray pyrolysis was investigated after oxidation at 800 °C in air. The film was characterized with regard to its morphology, structure and adhesion. The film was regular over the entire surface and adhered well to the metallic substrate. Oxidation modified the film structure, forming an oxide (SrCrO₄) in the metal/coating region due to Sr diffusion from the coating and Cr diffusion from the metallic substrate. A thermodynamic computational simulation confirmed the formation and stability of this oxide.     

Effects of docosahexaenoic acid on retinal development: Cellular and molecular aspects

We have recently shown that docosahexaenoic acid (DHA) is necessary for survival and differentiation of rat retinal photoreceptors during development in vitro. In cultures lacking DHA, retinal neurons developed normally for 4 d; then photoreceptors selectively started an apoptotic pathway leading to extensive degeneration of these cells by day 11. DHA protected photoreceptors by delaying the onset of apoptosis; in addition, it advanced photoreceptor differentiation, promoting opsin expression and inducing apical differentiation in these neurons. DHA was the only fatty acid having these effects. Mitochondrial damage accompanied photoreceptor apoptosis and was markedly reduced upon DHA supplementation. This suggests that a possible mechanism of DHA-mediated photoreceptor protection might be the preservation of mitochondrial activity; a critical amount of DHA in mitochondrial phospholipids might be required for proper functioning of these organelles, which in turn might be essential to avoid cell death. Müller cells in culture appeared to be involved in DHA processing: they took up DHA, incorporated in into glial phospholipids, and channeled it to photoreceptors in coculture. Both Müller cells, when cocultured with neuronal cells, and the glial-derived neurotrophic factor (GDNF) protected photoreceptors from cell death. These results suggest that glial cells may play a central role in regulating photoreceptor survival during development through the provision of trophic factors. The multiple effects of DHA on photoreceptors suggest that in addition to its structural role, DHA might be one of the trophic factors required by these cells.