Soluble and conductive polypyrrole copolymers containing silicone tegomers

Soluble and processable conductive copolymers of silicone tegomers and pyrrole were developed. This was easily accomplished by the oxidative polymerization of pyrrole monomer by Ce(IV) salt in the presence of silicone tegomers with hydroxyl chain ends. The resulting copolymers were soluble in dimethylformamide. The products were characterized by Fourier transform infrared, ¹H‐NMR, and four‐point probe conductivity, and their surface properties were investigated with contact‐angle measurements. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2896–2901, 2003     

Foliar Application of Silicon Enhances Growth,Flower Yield,Quality and Postharvest Life of Tuberose (Polianthes tuberosa L.) under Saline Conditions by Improving Antioxidant Defense Mechanism

Silicon - Tuberose is native to Mexico and then reached Europe and spread other parts of the world. In Pakistan, tuberose stalks come in the market during late summer and autumn when only few...     

Nonuniform Sampling for Detection of Abrupt Changes

In this work, detection of abrupt changes in continuous-time linear stochastic systems and selection of the sampling interval to improve the detection performance are considered. Cost functions are proposed to optimize both uniform and nonuniform sampling intervals for the well-known cumulative sum algorithm. Some iterative techniques are presented to make online optimization computationally feasible. It is shown that considerable improvement in the detection performance can be obtained by using nonuniform sampling intervals.     

Microstructure Study at Different Thicknesses of Disc-Shaped YBa2Cu3O7?x Prepared by FQMG Method

The flame-quench-melt-growth (FQMG) method was used for the preparation of bulk YBa₂Cu₃O_7?x (Y123). Both the superconducting and nonsuperconducting regions changing with thickness of superconducting sample were determined by X-ray diffraction (XRD) patterns and also observed at micrographs taken by the polarized optical microscope. It was observed that superconducting forming ratio which was examined for different thicknesses of the sample ranging from 6.54 to 1.58 mm strongly enhanced. This means that a region near the top surface of the sample contains more superconducting phase than the other regions. These observations would be helpful in designing and manufacturing the practical applications of YBCO systems.     

Chemical composition of white (Morus alba), red (Morus rubra) and black (Morus nigra) mulberry fruits

In this study, the chemical composition of white (Morus alba L.), red (Morus rubra L.) and black (Morus nigra L.) mulberry fruits grown in the East Anatolia Region of Turkey was investigated. The highest total phenolic and flavonoid contents were observed in black mulberry (1422 mg gallic acid equivalents/100 g fresh matter and 276 mg quercetin equivalents/100 g fresh matter). M. alba had the highest total fat content (1.10%), followed by M. nigra (0.95%) and M. rubra (0.85%), respectively. The major fatty acids in mulberry fruits were linoleic acid (54.2%), palmitic acid (19.8%) and oleic acid (8.41%), respectively. The total soluble solids content of mulberry species varied between 15.9% (M. rubra L.) and 20.4% (M. alba L.), acidity between 0.25% (M. alba L.) and 1.40% (M. nigra L.), pH between 3.52 (M. nigra L.) and 5.60 (M. alba L.), ascorbic acid 19.4 mg/100 g (M. rubra L.) and 22.4 mg/100 g (M. alba L.), respectively. Mineral compositions of the mulberry species were 0.83% N, 235 mg/100 g P, 1141 mg/100 g K, 139 mg/100 g Ca, 109 mg/100 g Mg, 60 mg/100 g Na, 4.3 mg/100 g Fe, 0.4 mg/100 g Cu, 4.0 mg/100 g Mn and 3.1 mg/100 g Zn, respectively.     

Deposition and Characterization of Si Substituted Cu2ZnSnS4 Thin Films

Silicon - The influence of the Si substitution ratio on the structural, morphological, and optical properties of Cu2ZnSnS4 (CZTS) thin films was examined. The Cu2Zn(SixSn1–x)S4 thin films...     

The Advanced Microwave Scanning Radiometer for the Earth Observing System (AMSR-E), NASDA's contribution to the EOS for global energy and water cycle studies

The Advanced Microwave Scanning Radiometer for the Earth Observing System (AMSR-E) was developed and provided to the National Aeronautics and Space Administration's EOS Aqua satellite by the National Space Development Agency of Japan, as one of the indispensable instruments for Aqua's mission. AMSR-E is a modified version of AMSR that was launched December 2002 aboard the Advanced Earth Observing Satellite-II (ADEOS-II). It is a six-frequency dual-polarized total-power passive microwave radiometer that observes water-related geophysical parameters supporting global change science and monitoring efforts. The hardware improvements over existing spaceborne microwave radiometers for Earth imaging include the largest main reflector of its kind and addition of 6.925-GHz channels. These improvements provide finer spatial resolution and the capability to retrieve sea surface temperature and soil moisture information on a global basis. This paper provides an overview of the instrument characteristics, mission objectives, and data products.     

CCII-based PID controllers employing grounded passive components

In this paper, both of current-mode and voltage-mode proportional plus integral plus derivative (PID) controllers employing the second-generation current conveyors (CCIIs) as active elements are developed. The presented novel PID controllers have grounded passive elements that do not need passive element matching, and realize independently adjustable PID parameters. Thus, it is easy to implement these PID controllers in integrated circuits. Several computer simulations are presented to demonstrate the behavior of these proposed PID controllers.     

Stability problems in universal current-mode filters

Analog circuit designers have usually focused on the design of circuits employing a minimum number of components, occupying less area and dissipating less power. However, some important issues such as signal limitations and especially stability problems of the analog circuits have not received considerable attention in the literature. Hence, the work described in this paper deals with the stability problems of two new current-mode analog filters employing multiple output current controlled conveyors (MOCCCIIs). Toward that end, a single pole model is replaced for each non-ideal current gain of the MOCCCIIs. Both of the novel universal current-mode active-C filters can simultaneously realize low-pass, band-pass and high-pass/notch filter responses. SPICE and MATLAB simulation results are given to verify the theoretical analysis.     

Electrografting of 3-methyl thiophene and carbazole random copolymer onto carbon fiber: characterization by FTIR-ATR, SEM, EDX

Electrografting of poly(3-methylthiophene-co-carbazole) onto high tenacity (TENAX HTA 5000) carbon fiber was carried out under preparative constant-current electrolysis conditions by electropolymerizing in non-aqueous media. The surface morphology of the electrografted carbon fibers was determined by scanning electron microscopy (SEM). For characterization of the chemical composition of the random copolymer, FTIR reflectance measurements (FTIR-ATR) were performed. The efficiency of the electrocopolymerization on carbon fiber surfaces under preparative constant-current electrolysis conditions as a function of the experimental conditions was evaluated (effect on thickness and morphology).