Spray forming: Science and technology

Spray forming involves sequential gas atomization of a melt into a spray of fine droplets and their deposition on a substrate to build up a high-density preform. The rapid solidification inherent in spray deposition generates refined, equiaxed and low segregation microstructures. A number of promising features of this near-net shape manufacturing process are highlighted and compared, wherever possible, with the conventional casting and PM techniques. Some commercial nozzles used to create spray and mechanisms associated with spray generation are described. The consolidation of the droplets and the development of the microstructure in the deposit are primarily governed by the nature of the spray and the thermal state of droplets on the deposition surface. Several microstructural characteristics of the deposit are presented and their origin in spray deposition is discussed.     

Optoelectronic integration of a GaAs/AlGaAs bistable field effecttransistor (BISFET) and LED

The bistable field effect transistor (BISFET) is a novel inversion-channel switching device exhibiting abrupt current transitions and hysteresis in its output characteristics. The semiconductor structure of the BISFET is compatible with a range of electronic and optoelectronic devices. In this work, integration of a BISFET with an LED is reported. Both devices have been implemented on a single semiconductor substrate using a single fabrication sequence. The BISFET is used to current drive the LED. Abrupt transitions and hysteresis are seen in the optical output from the circuit in the range of gate voltage from 1.75 V to 1.9 V     

\lambda -Statistical convergence of fuzzy numbers and fuzzy functions of order \theta

In this paper, we introduce the concept of $\lambda $ -statistical convergence of order $\theta $ and strong $\lambda $ -summability of order $\theta $ for the sequence of fuzzy numbers. Further the same concept is extended to the sequence of fuzzy functions and introduce the spaces like $S_\lambda ^\theta (\hat{f})$ and $\omega _{\lambda p} ^\theta (\hat{f})$ . Some inclusion relations in those spaces and also the underlying relation between these two spaces are also obtained.     

Electrical transport in copper chromite catalyst

The electrical conductivity, σ, and thermoelectric power, S, of copper chromite (CuCr₂O₄) are reported in the temperature range 295 to 815 K. A break (T _B) in the slope of the plot of log σ against T ^?1 was observed around 556 K. Apart from this break, the curves are linear, and their slopes correspond to activation energies of 0.60 eV (T _B<556 K) and 1.22 eV (T _B>556 K). A break (T′ _B) in the slope of the -S against T ^?1 plot was also observed round 556 K. Apart from the break at this temperature, the S against T ^?1 curves are linear. At T′ _B>556, S can be expressed by the relation $$S = - \left[ {\left( {\frac{{0.65 eV}}{{{\text{2}}eT}}} \right) + (0.42) mV K^{ - {\text{1}}} } \right]$$ The mechanism involved in the electrical transport is the hopping of holes from Cr⁴⁺ centres to neighbouring Cr³⁺ ions. The typical hopping mobility of the holes is of the order of 10⁶ m² V^?1 sec^?1. The mobility activation energy of the holes in CuCr₂O₄ decreases with temperature due to the smoothing of the potential barriers between Cr⁴⁺ and Cr³⁺ sites.     

Structure,thermal stability and electrical transport in coloured thallous tungstates

Different coloured thallous tungstates were prepared by solid state reaction between thallous carbonate and tungsten trioxide at higher temperatures. The structure and thermal stability of different thallous tungstates were determined by powder X-ray diffraction and thermogravimetric analysis, respectively. The electrical conductivity () and thermoelectric power (5) of pressed solid pellets of Tl₂WO₄ are reported in the temperature range 295 to 950 K. It is concluded that these materials have large numbers of oxygen ion vacancies and conduction occurs due to the electrons left by oxygen ions while escaping the solid. These electrons are trapped in the valence band and form centres analogous to a helium atom and electrical conductivity results when they enter the conduction band. The values of donor ionization energies have also been evaluated.     

A multi-item transportation problem with fuzzy tolerance

This paper presents the recently introduced modified subgradient method for optimization and its effectiveness in a fuzzy transportation model. Here a multi-item balanced transportation problem (MIBTP) is formulated where unit transportation costs are imprecise. Also available spaces and budgets at destinations are limited but imprecise. The objective is to find a shipment schedule for the items that minimizes the total cost subjected to imprecise warehouse and budget constraints at destinations. The proposed model is reduced to a multi-objective optimization problem using tolerances, then to a crisp single-objective one using fuzzy non-linear programming (FNLP) technique and Zimmermann's method. The above fuzzy MIBTP is also reduced to another form of deterministic one using modified sub-gradient method (MSM). These two crisp optimization problems are solved by Genetic Algorithm (GA). As an extension, fuzzy multi-item balanced solid transportation problems (STPs) with and without restrictions on some routes and items are formulated and reduced to deterministic ones following FNLP and Zimmermann's methods. These models are also solved by GA. Models are illustrated numerically, optimum results of fuzzy MIBTP from two deductions are compared. Results are also presented for different GA parameters.     

Two Channel Thermally Tunable Band-Stop Filter for Wavelength Selective Switching Applications by Using 1D Ternary Superconductor Photonic Crystal

By studying temperature-dependent dispersion characteristics and group velocity of 1D ternary photonic crystal (TPC) composed of dielectric-superconductor-dielectric materials, a thermally tunable band-stop filter which is capable of stopping unique wavelength channels without causing any interference amongst equally spaced wavelength channels of full width at half maximum of 1 nm each as per the requirement of wavelength division multiplexing standards adopted by the International Telecommunication Union specifying channel spacing in terms of frequency (wavelength) is suggested. The proposed structure can efficiently work as a two-channel wavelength selective switch for wavelength division multiplexing (WDM)-based all-optical networks. This study also gives theoretical insight to design some new kind of optical memories and tunable buffers which holds data temporary and have potential applications in modern communication systems.     

Inactivation efficacy of plasma-activated water: influence of plasma treatment time,exposure time and bacterial species

This study aimed to evaluate the influence of plasma treatment time, bacterial exposure time to PAW and bacterial species on the inactivation efficacy of plasma-activated water (PAW), with additional investigation of the inactivation mechanisms of PAW. Six bacterial species, including Listeria innocua, Staphyloccus aureus, Escherichia coli, Pseudomonas fluorescens, Shewanella putrefaciens and Aeromonas hydrophila were selected as the representative bacteria. The initial bacterial concentration was around 7 log CFU ml⁻¹ after mixing with PAW, and the inactivation efficacy was measured after different exposure times during the 4 °C storage. Scanning electron microscopy (SEM) images of the bacteria after PAW treatment were carried out to inspect the cell structure damage, and physicochemical properties of PAW, including pH, conductivity and long-living reactive species of H₂O₂, , and , were examined. The results showed that the inactivation efficacy of PAW was positively correlated with plasma treatment time and bacterial exposure time, and for the species examined in this study, the Gram-negative species were more sensitive to PAW than the Gram-positive species. Cell structure damage, including shrinkage, distortion, or holes, was observed after PAW treatment. The pH of PAW was acidified to 2.5–2.9, and conductivity was significantly increased to 518.0 μs cm⁻¹. and H₂O₂ were reduced during the 48 h storage, while an increased concentration was observed for . This study demonstrated that the processing parameters of plasma treatment time, exposure time and characteristics of bacteria can significantly affect the inactivation efficacy of PAW.