Scheduling railway traffic at a construction site

We consider the problem of rescheduling trains in the case where one track of a railway section consisting of two tracks in opposing directions is closed due to construction activities. After presenting an appropriate model for this situation we derive a polynomial algorithm for the subproblem of finding an optimal schedule with minimal latenesss if the subsequences of trains for both directions outside the construction site are fixed. Based on this algorithm we propose a local search procedure for the general problem of finding good schedules and report test results for some real world instances. Received: December 8, 1999 / Accepted: May 2, 2001     

Schnelle Lochkorrosion durch ungewöhnliche Anodenstabilisierung in einem Stahl/Wasser-System

Fast pitting corrosion in a steel/water system as a result of unusual stabilization of anodes Corrosion damage as a result of fast pitting was observed in industrial equipment made of unalloyed steel. The rate of formation and the manifestation of the pits are similar to pitting corrosion of stainless steels. Estimation of the kinetics of the localized corrosion in terms of differential aeration cells led to a model which indicates the stabilization of small anodic regions. The stabilization was caused by precipitation of the products of reaction between ferrous ions and polymeric silicate. The high rate of pitting also suggests that the oxygen entering the system during service periods involving the exposure of the system to air has enhanced the corrosion. These ideas could be substantiated by experiments, which also revealed particularly the effect of the concentration of NaCl. Anodic passivation by the addition of Na₂CO₃ or perhaps inhibition may be considered as candidate protective measures.     

Autoklaven-Untersuchungen der Spannungsrißkorrosion von Fe-Cr-Ni-Legierungen in NaCl/Co2/H2S-Medien

Autoclave investigation of stress corrosion cracking behaviour of Fe-Cr-Ni alloys in NaCl/CO₂/H₂S-environment In oil and gas production, the corrosion problems increase as the depth of the reservoirs increases. The oil and gas products contain chloride-rich waters and mixtures of H₂S and CO₂ at high pressures and temperatures. Materials that can be used under these conditions are only high strength high alloy steels and nickel base alloys. These materials must be assessed for corrosion resistance under these conditions. The environment contain chloride ions and hydrogen sulphide, which are known to be critical components for SCC. With the aid of autoclave experiments, the fields of corrosion resistance for the materials no. 1.4462, 1.4563 and 2.4618 were determined as a function of temperature and hydrogen sulphide pressure. The base environment was a 5 Molar sodium chloride solution at 20 bar carbon dioxide. While the corrosion resistance of the duplex steel, material no. 1.4462, decreases markedly as the strength of the material and the hydrogen sulphide pressure increase, the two austenitic materials are completely resistant up to 300 °C and hydrogen sulphide pressure of 15 bar. Only at 300 °C and high partial pressures of hydrogen sulphide the material no. 1.4563 did fail, when stressed to stress levels higher than the YS. The crack path was predominantly transgranular with minute fractions of intergranular cracking. The microstructure appears to have no effect. All results indicate that a mixed mechanism of hydrogen- and chloride induced SCC is operting, while a corrosion enhancement due to interaction of both critical components takes place.     

Do the Kallikaks look "menacing" or "retarded?"

To extend R. E. Fancher's (see record 1987-31600-001) review of claims that photographs of the Kallikak family in H. H. Goddard's (1912) study had been retouched to make them look more menacing and retarded, 29 Ss (aged 18–69 yrs) were surveyed for their impressions of the photographs. Overall, Ss were strongly inclined to view the photographed individuals as "kind" and "very bright." (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

(S)-Reutericyclin: Susceptibility Testing and In Vivo Effect on Murine Fecal Microbiome and Volatile Organic Compounds

We aimed to assess the in vitro antimicrobial activity and the in vivo effect on the murine fecal microbiome and volatile organic compound (VOC) profile of (S)-reutericyclin. The antimicrobial activity of (S)-reutericyclin was tested against Clostridium difficile, Listeria monocytogenes, Escherichia coli, Enterococcus faecium, Staphylococcus aureus, Staphylococcus (S.) epidermidis, Streptococcus agalactiae, Pseudomonas aeruginosa and Propionibacterium acnes. Reutericyclin or water were gavage fed to male BALBc mice for 7 weeks. Thereafter stool samples underwent 16S based microbiome analysis and VOC analysis by gas chromatography mass spectrometry (GC-MS). (S)-reutericyclin inhibited growth of S. epidermidis only. Oral (S)-reutericyclin treatment caused a trend towards reduced alpha diversity. Beta diversity was significantly influenced by reutericyclin. Linear discriminant analysis Effect Size (LEfSe) analysis showed an increase of Streptococcus and Muribaculum as well as a decrease of butyrate producing Ruminoclostridium, Roseburia and Eubacterium in the reutericyclin group. VOC analysis revealed significant increases of pentane and heptane and decreases of 2,3-butanedione and 2-heptanone in reutericyclin animals. The antimicrobial activity of (S)-reutericyclin differs from reports of (R)-reutericyclin with inhibitory effects on a multitude of Gram-positive bacteria reported in the literature. In vivo (S)-reutericyclin treatment led to a microbiome shift towards dysbiosis and distinct alterations of the fecal VOC profile.     

Einfluß des Molybdängehaltes niedriglegierter Stähle auf die Spannungsrißkorrosion in Nitratlösungen unter CERT-Belastung

Effect of molybdenum on the stress corrosion cracking behaviour of low alloy steels in nitrate solutions under slow strain rate testing conditions CERT tests ($ \mathop \varepsilon \limits^. = 10^{ - 6} {\rm s}^{ - {\rm 1}} $) were carried out in NaNO₃ solutions (0.1… 5 mol/l and 25… 90ßC) to determine the critical parameters for stress corrosion cracking. The steels tested were 15 Mo 3, LStE 36 and two laboratory heats with 0.08% C and molybdenum concentrations of 0 and 1%. All cracked specimens were examined metallographically. Different kinds of corrosion attack with and without intergranular features were observed. The critical potential range for intergranular attack is defined by two critical potentials. The negative critical potential is about U_H = ?0.2 V. It is hardly affected by the test parameters and the material. All free corrosion potentials lie in this range. All freely corroding specimens failed by intergranular cracking in 5 M NaNO₃ at 90°C. Only the coarse grained material without Mo showed intergranular cracks at even lower concentrations of NaNO₃. The positive critical potential varied widely over 0 to 0.5 V, depending on the test parameters and the material. Furthermore, in all cases a second critical potential range of intergranular attack was found at about U_H = 0.8 V. The potential range of U_H = 0.5 to 0.8 V for resistance against intergranular attack disappears with increasing temperature, as with the test conditions according to DIN 50 915 in boiling Ca(NO₃)₂ solutions. Furthermore, this was observed for the heat without Mo at already 90°C. With respect to environmental parameters, the effect of NaNO₃ concentration is very small but the effect of temperature is markedly high. The materials can be better characterized by critical temperatures rather than by critical potential ranges. Unified ranking of the materials with respect to their resistance to intergranular attack is not possible because of its dependence on the potential. However, on the basis of the extent of the domains in which the materials are resistant, it is possible to differentiate among the materials. Their resistance to intergranular attack increases in the following order: Heat without Mo → LStE 36 → 15 Mo 3 → heat with 1% Mo. The effect of Mo is explained in terms of its association with high proportions of bainite in the microstructure.     

Influences of mesh density and transformation behavior on the result quality of numerical calculation of welding induced distortion

Welding simulation is a powerful, cost-efficient tool to predict welding induced distortion. Nevertheless, effects on calculation result quality are often unknown, thus, sensitivity analyses should be performed to evaluate the influences of certain parameters on distortion development.In the present paper, a single-layer gas metal arc (GMA) weld of 5 mm thick structural steel S355J2+N is experimentally and numerically investigated. Subsequent to welding, the numerical modeling begins with a mesh analysis based on modal analyses. Hereby, the influence of different coarsening methods and element edge length (EEL) in welding direction on the deformation behavior or the stiffness of the discrete geometry is the focus of the analysis. Secondly, phase transformations in structural steels such as S355J2+N are decisive for final product properties. The sensitivity of welding-induced distortion is examined regarding different continuous cooling transformation (CCT) diagrams for S355J2+N.The present investigations deal with different relevant influences on numerical calculation of welding-induced distortion. The quality and quantity of these effects are clarified based on the experimental and numerical set-up employed. Consequently, prediction of welding-induced distortion is possible and potential for pre-production optimization is present.     

Parallel batch scheduling of equal-length jobs with release and due dates

In this paper we study parallel batch scheduling problems with bounded batch capacity and equal-length jobs in a single and parallel machine environment. It is shown that the feasibility problem 1|p-batch,b<n,r _j ,p _j =p,C _j ≤d _j |− can be solved in O(n ²) time and that the problem of minimizing the maximum lateness can be solved in O(n ²log n) time. For the parallel machine problem P|p-batch,b<n,r _j ,p _j =p,C _j ≤d _j |− an O(n ³log n)-time algorithm is provided, which can also be used to solve the problem of minimizing the maximum lateness in O(n ³log ² n) time.