Inverse identification of constitutive parameters from heat source fields: A local approach applied to hyperelasticity

In this paper, a new inverse identification method of constitutive parameters is developed from full kinematic and thermal field measurements. It consists in reconstructing the heat source field from two different approaches by using the heat diffusion equation. The first one requires the temperature field measurement and the value of the thermophysical parameters. The second one is based on the kinematic field measurement and the choice of a thermo-hyperelastic model that contains the parameters to be identified. The identification is carried out at the local scale, ie, at any point of the heat source field, without using the boundary conditions. In the present work, the method is applied to the challenging case of hyperelasticity from a heterogeneous test. Due to large deformations undergone by the rubber specimen tested, a motion compensation technique is developed to plot the kinematic and the thermal fields at the same points before reconstructing the heterogeneous heat source field. In the present case, the constitutive parameter of the Neo-Hookean model has been identified, and its distribution has been characterized with respect to the strain state at the surface of a cross-shaped specimen.     

The impact of roasting on the ochratoxin A content of coffee

Roasting coffee led to a drop in the ochratoxin A (OTA) concentration, as measured by the reference method, especially for dark type roasts. The way the beverage was prepared also affected the OTA content, which could paradoxically be higher than that of the initial roasted coffee. Assays on the thermal stability of pure OTA showed that it ought to be found in larger quantities in roasted coffee. This suggested that OTA was masked by reactions with the substrate during roasting. The absence of OTA in green coffee is therefore the best guarantee of safety.     

Canadian research activity in aquaculture: A bibliometric analysis

Analysis of the Canadian publications in the field of aquaculture reveals that Canada is one of the word's major contributors in this area. This confirms that Canada's expertise in science and technology often finds its stimulus in its resource-based industries. Several bibliometric indicators were used to enlighten the peculiar features of the Canadian research system. These include the channels of communication used by scientists, the authorship pattern, the level of collaboration, the identification of the institutions in which the research is performed and the uneven research effort distribution inside the country. The relevance of such quantitative measures for science policy-making is emphasized. The present study shows how bibliometric analysis, by describing the actual strengths and weaknesses of Canadian research and identifying the agents of this research activity, might foster a better understanding of the Canadian research enterprise as a whole.     

Preparation of monodisperse polystyrene particles using thiol-ended polyethylene oxide stabilizer in dispersion polymerization

Summary Radical dispersion polymerization of styrene in aqueous ethanol solutions was performed in the presence of a new reactive polyethylene oxide stabilizer with thiol end groups. This reactive stabilizer was compared to the more conventional poly (N-vinylpyrrolidone). Particles size distribution, molecular weights and kinetics were investigated. We demonstrate that the thiol ended dispersant displays a high stabilizing efficiency. Particles size, molecular weights and conversions are strongly influenced by the amount of stabilizer used.     

Spectroscopic investigation of Nd ion in LiNbO3, MgO:LiNbO3 and LiTaO3 single crystals relevant for laser applications

The polarized absorption and luminescence properties of Nd³⁺ doped isostructural LiNbO₃, MgO:LiNbO₃ and LiTaO₃ nonlinear bulk single crystals are reported. Pump-probe experiments associated with the Judd-Ofelt approach are used to estimate two types of room temperature cross sections: polarized emission cross sections of the dominant ⁴F_3/2 → ⁴I_1//2 transition near 1085 and 1093 nm and polarized excited-state absorption cross sections in the same spectral domain and in the green spectral range corresponding to self frequency doubling. Self frequency-doubling results are also given in Nd:LiNbO₃ and Nd:MgO:LiNbO₃ versus sample temperature.     

A new low-power GaAs two-single-port memory cell

This paper describes an experimental static memory cell in GaAs MESFET technology. The memory cell has been implemented using a mix of several techniques already published in order to overcome some of their principal drawbacks related to ground shifting, destructive readout, and leakage current effects. The cell size is 36×37 μm² using a 0.6-μm technology. An experimental 32 word × 32 bit array has been designed. From simulation results, an address access time of 1 ns has been obtained. A small 8 word×4 bit protoype was fabricated. The cell can be operated at the single supply voltage from 1 up to 2 V. The evaluation is provided according to the functionality and power dissipation. Measured results show a total current consumption of 14 μA/cell when operated at 1 V     

Coverage-biased random exploration of large models and application to testing

This paper presents several randomised algorithms for generating paths in large models according to a given coverage criterion. Using methods for counting combinatorial structures, these algorithms can efficiently explore very large models, based on a graphical representation by an automaton or by a product of several automata. This new approach can be applied to random exploration in order to optimise path coverage and can be generalised to take into account other coverage criteria, via the definition of a notion of randomised coverage satisfaction. Our main contributions are a method for drawing paths uniformly at random in composed models, i.e. models that are given as products of automata, first without and then with synchronisation; a new efficient approach to draw paths at random taking into account some other coverage criterion. Experimental results show promising agreement with theoretical predictions and significant improvement over previous randomised approaches. This work opens new perspectives for future studies of statistical testing and model checking, mainly to fight the combinatorial explosion problem.     

High solids content emulsions. III. Synthesis of concentrated latices by classic emulsion polymerization

Two different methods of producing bi‐ and trimodal latices of a mixture of methyl methacrylate, butyl acrylate, and small amounts of acrylic acid were tested. It is shown that a combination of concentrating blends of seed particles by semibatch reaction, followed by a nucleation of small particles plus a second semibatch phase allowed us to obtain stable latices with solids contents over 65% and viscosities of below 2500 mPa s^?1 with little coagulum formation. The key parameter in determining latex stability, coagulum formation, and viscosity appears to be the the particle size distribution, and especially its modification attributed to secondary nucleation. Because it is not possible to eliminate water‐soluble monomers from the polymerization recipe, secondary (homogeneous) nucleation must be minimized by careful addition of the free‐radical initiator and choice of monomer feed flow rates. The nucleation of the third population in the trimodal latices is best accomplished with a mixed surfactant system because renucleation by anionic surfactant alone leads to detrimental changes in the particle size distribution (PSD) resulting from excessive flocculation of particles. In addition, it was found that the viscosity of the final products was not sensitive to small changes in the ionic strength of the latex, although neutralization to a pH of 6 effectively doubles the final latex viscosity. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1916–1934, 2002; DOI 10.1002/app.10513