Functions for relative maximization

We introduce functions for relative maximization in a general context: the beta and alpha applications. After a systematic study of different kinds of regularities, we investigate how to approximate certain values of these functions using periodic orbits. We also show that the differential of an alpha application determines the asymptotic behavior of the optimal trajectories.     

Creep of PVDF monofilament sutures: service performance prediction from short-term tests

Isothermal short-term creep of poly (vinylidene fluoride) (PVDF) monofilament sutures was determined at several temperatures between 10 and 90 °C under the stress of 10 MPa. Long term service performance was predicted for 10 decades of time. The compliance master curve as a function of time fits a hyperbolic sine equation. The temperature shift factor as a function of the temperature a_T (T) is accurately represented by a general equation based on free volume. A simple relationship between the two parameters of the equation is explored. The viscoelasticity of PVDF is also seen in dynamic mechanical analysis performed at the frequency of 1 Hz. The origin of the viscoelastic character well present in the deformability of the PVDF in service is due to the occurrence of the α_c relaxation that is active at ∼50 °C (E″ peak at 1 Hz).     

XPS studies of directly fluorinated HDPE: problems and solutions

X-ray photoelectron spectroscopy (XPS) applied to the study of fluorinated polymer surfaces presents several problems related both to peak assignment and to degradation. In this work, we analyse extensively the question of XPS peak assignments in this kind of surfaces. We conclude that in this kind of surfaces using binding energy differences between fluorine and carbon is better than using absolute binding energies. Also a useful relation between fluorine photoelectron energy vs. polymer composition expressed through the atomic ratio fluorine/carbon (F/C) was found. A protocol for data treatment is proposed and applied to a XPS study of the degradation induced by X-ray on high-density polyethylene surfaces modified by direct fluorination. Results obtained for the degradation, namely the atomic ratio F/C obtained by two different methods, combined with angle resolved X-ray photoelectron spectroscopy (ARXPS) were used to study the fluorine concentration profile in depth, producing self-consistent results.     

Microstructural and textural characterization of a hot-rolled IF steel

The present paper reports the experimental results on the microstructural and textural characterization of a hot-rolled IF steel. The IF steel was hot-rolled in multiple passes in the austenitic field (1,070 °C) followed by air-cooling. SEM, TEM, and LOM were used to image the microstructure of the material. The global texture was determined by X-ray diffraction (XRD) technique. The mesotexture of selected regions was investigated by electron backscatter diffraction (EBSD). Results show the presence of a diffuse (nearly random) and weak texture in the hot-band that consists of recrystallized polygonal grains and subgrains. The fraction of boundaries with misorientations comprised in the interval 2° ≤ ψ < 15° was found to be lower than 5%. It can be concluded that these low angle boundaries and the presence of subgrains can be associated to the existence of a few areas softened by recovery during or after hot rolling in austenitic field.     

Bedload Transport in Alluvial Channels

Hydraulic, sediment, land-use, and rock-erosivity data of 22 alluvial streams were used to evaluate conditions of bedload transport and the performance of selected bedload-transport equations. Transport categories of transport-limited (TL), partially transport-limited (PTL), and supply-limited (SL) were identified by a semiquantitative approach that considers hydraulic constraints on sediment movement and the processes that control sediment availability at the basin scale. Equations by Parker et al. in 1982, Schoklitsch in 1962, and Meyer-Peter and Muller in 1948 adequately predicted sediment transport in channels with TL condition, whereas the equations of Bagnold in 1980, and Schoklitsch, in 1962, performed well for PTL and SL conditions. Overall, the equation of Schoklitsch predicted well the measured bedload data for eight of 22 streams, and the Bagnold equation predicted the measured data in seven streams.     

Lexically scoped distribution: what you see is what you get

We define a lexically scoped, asynchronous and distributed π-calculus, with local communication and process migration. This calculus adopts the network-awareness principle for distributed programming and follows a simple model of distribution for mobile calculi: a lexical scope discipline combines static scoping with dynamic linking, associating channels to a fixed site throughout computation. This discipline provides for both remote invocation and process migration. A simple type system is a straightforward extension of that of the π-calculus, adapted to take into account the lexical scope of channels. An equivalence law captures the essence of this model: a process behavior depends on the channels it uses, not on where it runs.     

Bone remodelling after total hip arthroplasty

Bone remodelling of the proximal femur following total hip arthroplasty (THA) is related to stress deviation with respect to physiological condition. The clinical relevance of this process is much debated with respect to its role in THA failure. In the present study a group of 475 An.C.A. anatomic cementless stems implanted in our institution were assumed as clinical reference. Of them, 294 had a short stem and 181 had a long stem. Stress shielding was X-ray evaluated in each patient. The survivorship analysis of this study group (negative events = stress shielding) showed significantly (p<0.05) lower survival rates at 25 months follow-up for patients with long-stem implants. A 3-D FEM model of the proximal femur was used to analyse the load transfer mechanism for the two types of stems in fully or proximally only bonding conditions. Little difference was predicted in the proximal stress magnitudes for the different stem lengths. On the contrary, stem-bone bonding leads to a notable increase in the stress shielding.     

Obituaries: Elizabeth Douvan (1926-2002).

Presents an obituary for Elizabeth Douvan (1926-2002). Douvan was a pioneer in the study of changing gender, work, and family roles; personal values; and well-being in the second half of the 20th century. Through her research, she contributed to the interdisciplinary fields of social psychology and women's studies while building and strengthening institutions that remain committed to the same mission. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A fuzzy queue-aware routing approach for wireless mesh networks

Recent advances in Wireless Mesh Networks (WMNs) have overcome the drawbacks of traditional wired and ad-hoc networks and now they are seen as a means of allowing last mile communications with quality level assurance in Future Multimedia Systems. However, new routing schemes are needed to provide end-to-end Quality of Service (QoS) and Quality of Experience (QoE) support for delay/loss/jitter-sensitive multimedia applications. The well-known OLSR (Optimized Link State Routing) protocol with ETX (Expected Transmission Count) metric brings many benefits to the path selection process, but has a drawback with regard to queue availability management, which reduces the system performance. This problem is caused when OLSR-EXT control messages are exchanged and the queues of mesh routers along the end-to-end communication path are overloaded. As a result, multimedia-related packets will suffer from loss/delay/jitter and the overall system performance will decrease. This paper proposes the Optimized Link State Routing-Fuzzy ETX Queue (OLSR-FEQ) protocol to overcome the limitations of OLSR-ETX regarding queue availability, QoS and QoE assurance. OLSR-FEQ optimizes network and user-based parameters by coordinating queue availability, QoS and fuzzy issues in the routing decision process as a way of allocating the best paths for multimedia applications. Performance evaluations were carried out with the Network Simulator (NS-2.34) to show the benefits of the proposed solution when compared with existing routing schemes, namely OLSR-ETX, OLSR-FLC, OLSR-MD and HWMP (IEEE 802.11s standard), regarding QoS (unsuccessful packet delivery and throughput) and QoE (PSNR, SSIM, VQM and MOS) parameters.     

Human language technology and communicative disabilities: requirements and possibilities for the future

For some years now, the Nederlandse Taalunie (Dutch Language Union) has been active in promoting the development of human language technology (HLT) applications for speakers of Dutch with communicative disabilities. The reason is that HLT products and services may enable them to improve their communication skills and verbal autonomy. We sought to identify a minimum common set of HLT resources that is required to develop tools for a wide range of communication disabilities. In order to reach this goal, we investigated the specific needs of communicatively disabled people and related these needs to the underlying HLT software components. By analysing the availability and quality of these essential HLT resources, we were able to identify which of the crucial elements need further research and development to become usable for developing applications for communicatively disabled speakers of Dutch. The results obtained in the current survey can be used to inform policy institutions on how they can stimulate the development of HLT resources for this target group. In the current survey results were obtained for Dutch, but a similar approach can also be applied to other languages.