Effect of anisotropy of tin on thermomechanical behavior of solder joints

Properties of body centered tetragonal tin are highly anisotropic. As a consequence large stresses can develop at the tin grain boundaries due to coefficient of thermal expansion mismatch during temperature excursions. A modeling approach to evaluate the 3D stress states that develop at grain boundaries during thermomechanical fatigue in tin-based solder is presented. Development of significant amounts of stresses in the plane of the grain boundary can cause grain-boundary sliding and surface-relief effects, while those normal to the grain boundary can cause grain-boundary decohesion and cracking.     

Effects of situational demand upon social enjoyment and preference in schizotypy.

The socioemotional functioning of schizophrenic and schizotypic individuals is marked by withdrawal, poor organization, and limited emotional displays. Such behavioral tendencies and lack of social enjoyment in schizotypy could be linked to the relative situational demands or role ambiguity inherent in specific social activities. To determine whether high-schizotypy individuals prefer more clearly role-defined social activities (e.g., visiting relatives) to more ambiguous, novel situations (e.g., going alone to a party), the authors gathered reports from 52 high-schizotypy and 60 low-schizotypy individuals on their enjoyment and frequency of engaging in social situations varying in relative situational demand. Parallel reports were obtained from knowledgeable others. Group × Situational Demand interactions revealed the hypothesized pattern of reduced frequency and enjoyment ratings for ambiguous or novel situations by the high-schizotypy participants in both self and others' reports. Groups were more comparable in their reported frequency and enjoyment of less ambiguous situations. Results suggest the importance of situational demands in the socioemotional experience and behavioral withdrawal in schizotypy. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Equalization with oversampling in multiuser CDMA systems

Some of the major challenges in the design of new-generation wireless mobile systems are the suppression of multiuser interference (MUI) and inter-symbol interference (ISI) within a single user created by the multipath propagation. Both of these problems were addressed successfully in a recent design of A Mutually Orthogonal Usercode-Receiver (AMOUR) for asynchronous or quasisynchronous code division multiple access (CDMA) systems. AMOUR converts a multiuser CDMA system into parallel single-user systems regardless of the multipath and guarantees ISI mitigation, irrespective of the channel locations. However, the noise amplification at the receiver can be significant in some multipath channels. In this paper, we propose to oversample the received signal as a way of improving the performance of AMOUR systems. We design Fractionally Spaced AMOUR (FSAMOUR) receivers with integral and rational amounts of oversampling and compare their performance with the conventional method. An important point that is often overlooked in the design of zero-forcing channel equalizers is that sometimes, they are not unique. This becomes especially significant in multiuser applications where, as we will show, the nonuniqueness is practically guaranteed. We exploit this flexibility in the design of AMOUR and FSAMOUR receivers and achieve noticeable improvements in performance.     

Optimal size,hydraulic retention time and volatile solids loading rate of biogas unit using water hyacinth

With a view to evaluate the effects of hydraulic retention time and volatile solids loading rate on methane production using water hyacinth, experiments were conducted in a 160 dm³ capacity, well-mixed continuous digestion unit at ambient temperature. The optimal design of biogas plant using water hyacinth was elucidated, to provide a unit giving a maximum methane yield of 0.16 nm³ kg^?1 volatile solids added, which was 60% greater than the conventional plant using cowdung. The calculations of optimal design factors were based on reactor size, hydraulic retention time and volatile solids loading rate; considerations were made of capital cost, running costs and operational revenue.     

Effect of organic dopants on electrodeposition and characteristics of polyaniline under the varying influence of H2SO4 and HClO4 electrolyte media

Electrodeposition of conducting polyaniline (Pani) was made under potentiostatic condition at pH 1.0 in different electrolyte media (H₂SO₄ and HClO₄) in the absence and presence of two organic dopants, disodium salts of naphthalene-1,5-disulphonic acid (NSA) and of catechol-3,5-disulphonic acid (CSA). The rate and yield of Pani deposition were dependent on the acid medium and the dopant employed. NSA in H₂SO₄ caused an increase in rate and yield but CSA decrease when compared to the rate and yield of H₂SO₄ alone. In HClO₄ medium, both the dopants showed a decrease. With regard to DC electrical conductivity, both the dopants exhibited an enhancement in H₂SO₄ medium but NSA a decline in HClO₄. Characterisation of the electrosynthesised polymer samples by various instrumental techniques (cyclic voltammetric: CV, FTIR, UV-Visible: UV-Vis, EPR, XRD, TGA and DTG methods) revealed that between the two acid media, H₂SO₄ was the better one. Further, it enlightened the role of two organic dopants in relation to the acid media. The advantageous role of NSA in H₂SO₄ had origin on its molecular characteristics such as non-polarity, larger π-electron cloud etc., while CSA could not perform such a role because of its easily oxidisable hydroxyl groups. In HClO₄, however, both the dopants could play only an unfavourable role owing to its greater polarity and oxidizing power than H₂SO₄.     

Subspace-Based Blind Channel Identification for Cyclic Prefix Systems Using Few Received Blocks

In this paper, a novel generalization of subspace-based blind channel identification methods in cyclic prefix (CP) systems is proposed. For the generalization, a new system parameter called repetition index is introduced whose value is unity for previously reported special cases. By choosing a repetition index larger than unity, the number of received blocks needed for blind identification is significantly reduced compared to all previously reported methods. This feature makes the method more realistic especially in wireless environments where the channel state is usually fast-varying. Given the number of received blocks available, the minimum value of repetition index is derived. Theoretical limit allows the proposed method to perform blind identification using only three received blocks in absence of noise. In practice, the number of received blocks needed to yield a satisfactory bit-error-rate (BER) performance is usually on the order of half the block size. Simulation results not only demonstrate the capability of the algorithm to perform blind identification using fewer received blocks, but also show that in some cases system performance can be improved by choosing a repetition index larger than needed. Simulation of the proposed method over time-varying channels clearly demonstrates the improvement over previously reported methods.     

Performance analysis of voting strategies for a fly-by-wire systemof a fighter aircraft

Findings of studies on input processing of a digital fly-by-wire system of a fighter aircraft are presented. Objectives were to select a suitable software structure complying with reliability and fault tolerance requirements and to assess its computational load. Ramp and constant input signals with noise were studied based on Monte-Carlo methods. Voting strategies studied and compared include lower-median, upper-median, and weighted average. Execution times and memory requirements of each strategy have also been assessed     

A micromechanics model for the prediction of static strength of off-axis unidirectional laminates

In this paper a micromechanics model using the concentric cylinder assemblage model and the Mori-Tanaka average stress scheme is used to predict the static strength of unidirectional angle ply laminates. The predicted strengths agree with experimental results for Glass/Epoxy and Graphite/Epoxy systems.