Nonlinear viscoelastic modeling of soft polymers

A one‐dimensional phenomenological constitutive model, representing the nonlinear viscoelastic behavior of polymers is developed in this study. The proposed model is based on a modification of the well‐known three element standard solid model. The linear dashpot is replaced by an Eyring type one, while the nonlinearity is enhanced by a nonlinear, strain dependent spring constant. The new constitutive model was proved to be capable of capturing the main aspects of nonlinear viscoelastic response, namely, monotonic and cyclic loading, creep and stress relaxation, with the same parameter values. Model validation was tested on the experimental results at various modes of deformation for two elastomeric type materials, performed elsewhere. A very good agreement between model simulations and experimental data was obtained in all cases. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42141.     

A Composite Index of Compliance for Chronic In‐Center Hemodialysis Patients

We developed a composite compliance index as the sum of the compliance scores for interdialytic weight gain (IDWG), pre‐dialysis serum potassium and phosphorus concentrations (each scored from zero to 3, with 3 indicating the poorest compliance), and skipping hemodialysis sessions (scored from zero to 9, with 9 indicating the poorest compliance). We used this composite score to prospectively evaluate compliance in 25 prevalent hemodialysis patients over a period of 1 year. We then followed these patients for another 3.5 years. The patients studied were divided into two groups: group A (poor compliance) consisted of 9 subjects with composite score ≥ 9 (13.2 ± 3.2); group B (better compliance) consisted of 16 subjects with composite score < 9 (4.7 ± 1.8). Age, duration of hemodialysis, and frequency of diabetes mellitus did not differ between the groups. Group A contained higher fractions of subjects with history of alcoholism (66.7% vs 12.5%, p = 0.010), other substance addiction (44.4% vs 0%, p = 0.010), and severe psychosocial problems (88.9% vs 18.8%, p = 0.002). Mean survival from the beginning of observation, estimated by actuarial life‐table survival analysis, was 1.19 years in group A and 2.60 years in group B (p = 0.0265). A composite compliance index incorporating domains indicating adherence to diet, medications, and dialysis schedule identified other behavioral problems in poorly compliant patients. Hemodialysis patients characterized by this composite index as poorly compliant had shortened survival.     

R-CURVE MODEL OF CERTAIN CERAMIC COMPOSITES

Abstract— The influence of crack-bridging on the R -curve for certain types of ceramic composites is modeled. Small scale bridging conditions are assumed. A recurrence procedure is used to solve the governing coupled integral equations, resulting in R -curves (stress intensity factor versus crack growth) that depend on well defined microstructural parameters. In addition, the bridging stresses and the crack opening diplacements were computed for all stages of the R -curve development. The numerical scheme is quite general and can be used for a variety of bridging laws. The convergence of the solution method is uniform, and the accuracy is a priori controlled. The results are normalized so that they can be applied for a large variety of composites with different micromechanical parameters. R -curves were computed for different bridiging laws, and were found to be sensitive to the specific bridging law used each time. Some strength-toughness relations are also discussed. The results are particularly suitable for slow crack growth analysis.     

Synergism of Toughening Mechanisms in Whisker-Reinforced Ceramic-Matrix Composites

The improved fracture resistance of whisker-reinforced ceramic-matrix composites involves more than one energy-absorbing mechanism. The possible mechanisms are reviewed and a micromechanical model evaluating the relative contributions to the overall toughness is presented. The mechanisms involve microcracking, load transfer, bridging, and crack deflection. The synergism of these mechanisms is examined using an energy release rate balance equation. The basic assumption of the proposed model is that the load transfer between the matrix and the whiskers is due to Coulomb friction. The model has been applied to an Al₂O₃/SiC whisker composite and shows reasonable agreement with reported experimental results. The role of the thermal residual stresses is also examined in light of the frictional load transfer assumption.     

The Association of Human Herpesviruses with Malignant Brain Tumor Pathology and Therapy: Two Sides of a Coin

The role of certain viruses in malignant brain tumor development remains controversial. Experimental data demonstrate that human herpesviruses (HHVs), particularly cytomegalovirus (CMV), Epstein–Barr virus (EBV) and human herpes virus 6 (HHV-6), are implicated in brain tumor pathology, although their direct role has not yet been proven. CMV is present in most gliomas and medulloblastomas and is known to facilitate oncomodulation and/or immunomodulation, thus promoting cancer cell proliferation, invasion, apoptosis, angiogenesis, and immunosuppression. EBV and HHV-6 have also been detected in brain tumors and high-grade gliomas, showing high rates of expression and an inflammatory potential. On the other hand, due to the neurotropic nature of HHVs, novel studies have highlighted the engagement of such viruses in the development of new immunotherapeutic approaches in the context of oncolytic viral treatment and vaccine-based strategies against brain tumors. This review provides a comprehensive evaluation of recent scientific data concerning the emerging dual role of HHVs in malignant brain pathology, either as potential causative agents or as immunotherapeutic tools in the fight against these devastating diseases.     

Comparison of various modeling methods for analysis of powder compaction in roller press

Recently used models relating basic properties of the feed material, roller press design and its operating parameters are reviewed. In particular, we discuss the rolling theory for granular solids proposed by J.R. Johanson in the 1960s, later trials utilizing slab method and newly developed final element models. These methods are compared in terms of efficiency and accuracy of predicting the course of basic process variables like nip angle, pressure distribution in roll nip region, neutral angle, roll torque and roll force.

The finite element method offers the most versatile approach because it incorporates adequate information about powder behavior, geometry and frictional conditions. This enables to perform realistic computer experiments minimizing costs, time and resources needed for process and equipment optimization.     

On the information modeling for the electronic operation of supply chains: A maritime case study

Nowadays, the manufacturing industry is adopting modern information technologies in order to optimize their business process and to achieve integration with supply chain partners that are geographically dispersed, by expanding the physical limits of their business globally. The growth of the World Wide Web and the advantages of the software technologies arising from it render this goal possible. This paper discusses how modern information technology, particularly the ISO 10303—STEP and eXtensible Markup Language—XML, can be utilized jointly to support the communication of different partners. An approach to support enterprise operation through efficient data exchanges, by adopting modern data modeling techniques for integration among partners worldwide and using the web as a communication layer, is described. The paper deals particularly with the ship repair industry as a case study of these problems and suggests a feasible solution.     

Public-Private Partnerships in the Water Sector

Abstract

Types of partnerships between public and private companies in water and sewage services are evaluated on the basis of the economic efficiency of the scheme for each partner. Modeling of public-private partnerships involves the formulation of a contract prototype, which determines the roles, functions, and responsibilities as well as the allocation of costs and revenues for each partner. Alternative water management scenarios are used to identify the investments required for meeting the projected demand for water and sewage services. Investment and operational costs as well as revenues from water and sewage services are estimated according to the allocation defined in the contract prototype. The economic efficiency of the scheme is assessed through a cost benefit analysis for each partner. The evaluation of different water management scenarios indicates that, for the Cyclades Islands, Greece, there is a substantial water market where several forms of partnerships could be attractive for both the public and the private sectors. Such partnerships include, among others, lease purchase, temporary privatization, built operate transfer (BOT), and built own operate transfer (BOOT). These forms of public-private partnerships could also be successful in similar regions where significant improvements and expansion of the infrastructure is required while access to the required funds and expertise is restricted for small public water companies.