Hydrophobic Cross-Linked Poly(dimethylsiloxane)-Based Sorbents for Oil Spill Applications

With the increase of industrialization and urbanization, humankind faces massive oil-based pollution due to tanker accidents, human error, and natural disasters. For this, hydrophobic sorbents are fabricated and their applications for the removal of oil from polluted water sources are investigated. These hydrophobic sorbents are prepared by the condensation reaction of poly(dimethylsiloxane) and tris[3-(trimethoxysilyl)propyl]isocyanurate cross-linker via bulk polymerization. The obtained sorbents exhibit high oil sorption capacity, fast absorption–desorption kinetics, and great reusability. Moreover, they can selectively absorb oil from the water surface, thus making them practical for water clean-up applications.     

Degradation of Lake Ziway,Ethiopia: A study of the environmental perceptions of school students

Lake Ziway in Ethiopia is a freshwater lake supporting multitude uses, including irrigation, fishing, water supply and recreation. However, the lake is being degraded primarily because of various land‐ and water‐use activities in its watershed. Recognizing these human impacts on the lake's water quality and quantity, the perceptions of school students were surveyed under the belief that the future of the lake is largely dependent on this younger generation. The goal of this study was to better understand how students actually recognize the extent to which various human activities impact the water quantity and quality of Lake Ziway. As major stakeholders in their communities, the perceptions of school students from four high schools regarding the changes to the lake over time were investigated. Students were contacted by purposive sampling, based on criteria of student academic performances, and their proximity to the lake. Their perceptions were studied on the basis of an interview survey. The majority of students indicated that high levels of human activities, especially water abstractions and water pollution, were the main lake impacts. Students believe there is a lack of sustainable utilization and protection of the lake. They suggested coordinated activities among all lake stakeholders in the participation and decision‐making process to properly manage the lake. Provision of awareness to both local administrations and local communities, concern for establishing an appropriate regulatory body and allocating a sufficient budget, and strict controls on flower farm practices in the lakeshore, also was considered to be of high priority as a means of conserving the sustainability of the lake. The result derived from this survey has important implications for facilitating improved school curricula, and for federal, regional and district level water resource management authorities, in setting priorities and developing policies for the sustainability of Lake Ziway.     

Conjugated polymers with polar side chains in bulk heterojunction solar cell devices

Two polymers with polar side chains, namely poly[2,7‐(9,9‐dioctylfluorene)‐alt‐5,5‐(5',8'‐di‐2‐thienyl‐(2',3'‐bis(3''‐(2‐(2‐methoxyethoxy)ethoxy)phenyl)quinoxaline))] ( P1 ) and poly[2,7‐(9,9‐bis(2‐(2‐methoxyethoxy)ethyl)fluorene)‐alt‐5,5‐(5',8'‐di‐2‐thienyl‐(2',3'‐bis(3''‐(2‐(2‐methoxyethoxy)‐ethoxy)phenyl)quinoxaline))] ( P2 ), were synthesized for solar cell application. A series of bulk heterojunction solar cells were systematically fabricated and characterized by varying the electron‐acceptor materials, processing solvents and thickness of the active layer. The results show that P1 , with a higher molecular weight and good film‐forming properties, performed better. The best device showed an open circuit voltage of 0.87 V, a short circuit current of 6.81 mA cm^?2 and a power conversion efficiency of 2.74% with 1:4 polymer:[6,6]‐phenyl‐C71‐butyric acid methyl ester (PCBM[70]) mixture using o‐dichlorobenzene (o‐DCB) as processing solvent. P2 on the other hand showed a poorer performance with chlorobenzene as processing solvent, but a much improved performance was obtained using o‐DCB instead. Thus, an open circuit voltage of 0.80 V, short circuit current of 6.21 mA cm^?2 and an overall power conversion efficiency of 2.22% were recorded for a polymer:PCBM[70] mixing ratio of 1:4. This is presumably due to the improvement of the morphology of the active layer using o‐DCB as processing solvent. © 2013 Society of Chemical Industry     

Annual vegetation burns across the northern savanna region of Ghana: period of occurrence, area burns, nutrient losses and emissions

This study has assessed the seasonal occurrence of annual vegetation fires and defined inter-seasonally burned area for the different vegetation cover types across Ghana and the northern region of Ghana using 10-year (2001?C2010) remote sensing data. These values were used with fire induced elemental losses to estimate greenhouse gas emissions and net plant nutrient loss due to gross bush fire nutrient transfers and annual atmospheric nutrient depositions. About 21, 68, 10 and 1?% of annual burns across the northern region of Ghana take place in the months of November, December, January and February respectively. As much as 68?±?4 thousand km² (25?C32?%) and 37?±?2.6 thousand km² (46?C60?%) of dry land are annually burned across Ghana and the northern region of Ghana respectively, with 53?C56?% of the total annual burns across the country taking place in the northern region. About 10,100?C28,400 Gg of C, comprising 215?C4,700 thousand Gg of CO₂ equivalent (CO₂, CH₄) potential global warming green house gases and 48?C324 thousand Gg of local pollutants (CO, NO_x) are estimated to be released annually through bush fire occurrence across Ghana. Net negative balance for P between fire-induced nutrient transfers and, annual wet and dry nutrient deposits is of concern given the high P-sorbing mineral content of the soils. The temporal loss of P suggest an input source than wet and dry atmospheric P depositions for the sustenance of the ecosystem or predict a long term threat to regional food production.     

Electro‐induced polymerization of acrylamide initiated by the potassium permanganate–titriplex VI redox system

The polymerization of acrylamide (AAm) was carried out with a potassium permanganate–Titriplex VI redox initiator system with and without electrolysis. Because of the high metal‐ion concentration in general, low‐molecular‐weight polymers were obtained (weight‐average molecular weight = 2600–4000). The effect of potassium permanganate and AAm concentrations and temperature on the polymerization yield was studied and compared with results obtained under the same experimental conditions used for electrolysis. The results of Fourier transform infrared spectroscopy, atomic absorption spectrometry, and scanning electron microscopy (SEM) results are given. SEM micrographs of the polymer obtained by electrochemical methods exhibited smoother surfaces than those obtained by nonelectrolytic methods. In the absence of potassium permanganate, there was no polymerization under experimental conditions. A possible reaction mechanism is suggested. The electro‐induced system resulted in about a 50% increase in the yield. Manganese content in the electro‐induced and chemical polymerization systems were 2.7 and 8.2%, respectively, supporting the yield increase in the electro‐induced system. A graphite electrode was used and resulted in a high yield and a fibrous polymeric structure. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 1526–1534, 2001     

Direct LIGA service for prototyping: status report

Since the early 1990s a variety of applications ranging from precision metallic, ceramic, or polymeric parts to complex devices for micro-fluidic and micro-optic applications have been discussed with the assumption that LIGA can either make a significant contribution or is the sole technology able to make these products. The question today is, have individual LIGA groups or even the entire LIGA community achieved this goal? Despite major investments, a lot of hard work from many students and researchers, and some promising “prototypes”, a true mass product made by direct LIGA, i.e., using X-ray lithography and electroplating, has still not entered the market. This paper will briefly present the current status of direct-LIGA technology and discuss some examples of commercialization efforts as well as prospects for high-volume production.     

Coexistence of Superconductivity and Spin Density Wave (SDW) in Ferropnictide Ba<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>K<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Fe<Subscript>2</Subscript>As<Subscript>2</Subscript>

This work focuses on the theoretical investigation of the coexistence of superconductivity and spin density wave (SDW) in ferropnictide Ba_1?x K _x Fe₂As₂. By developing a model Hamiltonian for the system and by using quantum field theory Green’s function formalism, we have obtained mathematical expressions for superconducting transition temperature (T _C), spin density wave transition temperature (T _sdw), superconductivity order parameter (Δ_Sc), and spin density wave order parameter (Δ_sdw). By employing the experimental and theoretical values of the parameters in the obtained expressions, phase diagrams of superconducting transition temperature (T _C) versus superconducting order parameter (Δ_Sc) and spin density wave transition temperature (T _sdw), versus spin density wave order parameter (Δ_sdw) have been plotted. By combining the two phase diagrams, we have demonstrated the possible coexistence of superconductivity and spin density wave (SDW) in ferropnictide Ba_1?x K _x Fe₂As₂.     

Organic solvent absorbents based on linear diol

Cross‐linked poly(orthocarbonate)s were prepared by condensation of the tetraethyl orthocarbonate with different length of aliphatic diols. The synthesized polymers have been characterized by Fourier‐transform infrared spectroscopy, solid‐state ¹³C cross‐polarization magic angle spinning (CPMAS) nuclear magnetic resonance, thermal gravimetric analysis, and elemental analysis. The cross‐linked polymers were evaluated for organic solvent absorbency application. The effect of diol type on swelling properties of cross‐linked polymers was studied through the solvent absorption tests. The swelling parameters such as maximum solvent absorbency, saturation time, and retention of the solvent were evaluated for the synthesized sorbents. All of the cross‐linked polymers had moderate thermal stability and good regenerable solvent uptake abilities. POLYM. ENG. SCI., 53:2102–2108, 2013. © 2013 Society of Plastics Engineers