Characterization of the Ion Beam Current Density of the RF Ion Source with Flat and Convex Extraction Systems

Silicon - The characterization of ion beam current density distribution and beam uniformity is crucial for improving broad-beam ion source technologies. The design of the broad ion beam extraction...     

Modeling of Hydrogen Permeation through Pd Membrane on Ceramic Supports Activated via Pd Nanoparticles–TiO2–Bohemite Suspension

Theoretical Foundations of Chemical Engineering - Thin dense Pd composite membrane was prepared via electroless plating method. Pd nanoparticles embedded polyethylene glycol (PEG) was used in...     

An extended hesitant fuzzy set using SWARA-MULTIMOORA approach to adapt online education for the control of the pandemic spread of COVID-19 in higher education institutions

The world has been challenged since late 2019 by COVID-19. Higher education institutions have faced various challenges in adapting online education to control the pandemic spread of COVID-19. The present study aims to conduct a survey study through the interview and scrutinizing the literature to find the key challenges. Subsequently, an integrated MCDM framework, including Stepwise Weight Assessment Ratio Analysis (SWARA) and Multiple Objective Optimization based on Ratio Analysis plus Full Multiplicative Form (MULTIMOORA), is developed. The SWARA procedure is applied to the analysis and assesses the challenges to adapt the online education during the COVID-19 outbreak, and the MULTIMOORA approach is utilized to rank the higher education institutions on hesitant fuzzy sets. Further, an illustrative case study is considered to express the proposed idea's feasibility and efficacy in real-world decision-making. Finally, the obtained result is compared with other existing approaches, confirming the proposed framework's strength and steadiness. The identified challenges were systemic, pedagogical, and psychological challenges, while the analysis results found that the pedagogical challenges, including the lack of experience and student engagement, were the main essential challenges to adapting online education in higher education institutions during the COVID-19 outbreak.

     

Development of degradation model for urban asphalt pavement

There is a lack of a profound understanding of urban pavement deterioration pattern. This is due to the complexity of traffic conditions and the variety of pavement structures in urban roads. The lack of a suitable deterioration model for the urban pavements limits the possibility of making any scientific and cost-effective repair and maintenance strategy. There is a need for a better understanding of the long-term behaviour of urban pavements by which predictive pavement condition models can be derived and consequently a suitable maintenance management system can be built. In response to this need, a comprehensive field study was performed in three Iranian cosmopolitan cities. Pervasive pavement damages were defined and an urban pavement condition index was established. A deterioration model was developed by monitoring and analysing the conditions of road pavements in a period of four years. This model varies as the structural and loading conditions of the pavement change. The efficiency and practicability of the model in predicting the conditions of the pavements were illustrated.     

Mechanism study of silver nanoparticle production using Neurospora intermedia

Elucidation of the molecular mechanism of silver nanoparticle (AgNP) synthesis is necessary to control nanoparticle size, shape, and monodispersity. In this study, the mechanism of AgNP formation by Neurospora intermedia was investigated. The higher production rate of AgNP formation using a culture supernatant heat‐treated at 100° and 121°C relative to that with an un‐treated culture supernatant indicated that the native form of the molecular species is not essential. The effect of the protein molecular weight (MW) on the nanoparticle size distribution and average size was studied by means of ultraviolet–visible spectroscopy and dynamic light scattering. Using un‐treated and concentrated cell‐free filtrate passed through 10 and 20 kDa cut‐off filters led to the production of AgNPs with average sizes of 25, 30, and 34 nm, respectively. Also, using the permeate fraction of cell‐free filtrate passed through a 100 kDa cut‐off filter led to the formation of the smallest nanoparticles with the narrowest size distribution (average size of 16 nm and polydispersity index of 0.18). Sodium dodecyl sulphate polyacrylamide gel electrophoresis analysis of the fungal extracellular proteins showed two notable bands with the MWs of 15 and 23 kDa that are involved in the reduction and stabilisation of the nanoparticles, respectively.Inspec keywords: silver, nanoparticles, nanofabrication, proteins, molecular weight, ultraviolet spectra, visible spectra, cellular biophysics, electrophoresis, molecular biophysicsOther keywords: Neurospora intermedia, molecular mechanism, silver nanoparticle synthesis, nanoparticle shape, nanoparticle monodispersity, AgNP formation, untreated culture supernatant, molecular species, protein molecular weight, MW, nanoparticle size distribution, ultraviolet‐visible spectroscopy, dynamic light scattering, untreated cell‐free filtrate, concentrated cell‐free filtrate, cut‐off filters, permeate fraction, polydispersity index, Sodium dodecyl sulphate polyacrylamide gel electrophoresis analysis, fungal extracellular proteins, nanoparticle reduction, nanoparticle stabilisation, temperature 100 degC, temperature 121 degC, size 25 nm, size 30 nm, size 34 nm, size 16 nm, Ag     

Impacts in multibody systems: modeling and experiments

This paper outlines a novel approach to the modeling and analysis of impact involving multibody systems. This approach is based on an analysis of energy absorption and restitution during impact, using a decomposition of the kinetic energy, which decouples the parts associated with the spaces of admissible and constrained motions of the underlying unilateral constraints. Such a decomposition turns out to be useful in the analysis of energy dissipation during impact, and leads to a generalized definition of the energetic coefficient of restitution, which targets particularly collisions in multibody systems. The applicability of the approach reported is investigated by conducting an experimental study on a robotic testbed. It is shown that impact between multibody systems is considerably affected not only by the local dynamics characteristics of the interacting bodies, but also the configuration of the whole multibody system. The results reported here show that our decomposition can offer a sound characterization of impact in several problems of multibody systems.     

Controlled release of fluorouracil (5-FU) from chitosan-co-poly(ethylene glycol)/ poly(glycerol sebacate)-co-poly(ethylene glycol)-coated iron oxide

A blend of polyglycerol sebacate-poly ethylene glygol/chitosan-poly ethylene glycol-coated iron oxide (PGS-PEG/CS-PEG@Fe₃O₄) nanoparticles for 5FU delivery was prepared by reverse ultrasonic emulsification method. To enhance polymers’ solubility, PEG was grafted. Chemical characterization was performed through Fourier transformed infrared and proton nuclear magnetic resonance spectra. In vitro assay revealed that release profile of 5FU-loaded PGS-PEG/CS-PEG@Fe₃O₄ is sustained. Moreover, cytotoxicity was analyzed on HT29 cell line at the presence of external magnetic field using the lactate dehydrogenase and Alamar Blue. Results illustrate that (PGS-PEG/CS-PEG@Fe₃O₄) is promising to use as a carrier for 5FU anticancer agent with sustained tailored release.     

Optimization of triangular microchannel heat sinks using constructal theory

The present paper examines the optimization of triangular microchannel heat sinks. The impact of volume fraction of solid material and pressure drop on the maximum temperature of the microchannel heat sinks are investigated and their optimum operating conditions are compared. From the results, it is seen that increasing the side angle of the triangular microchannel, improves its performance. Furthermore, there is an appropriate agreement between the analytical and numerical results. Finally, the effect of degrees of freedom on the performance of microchannels is investigated. To accomplish this end, the triangular microchannels with the side angle of 60 degree have been chosen as it has the best performance compared to other microchannels. It is observed that the minimized maximum temperatures of optimized microchannel heat sinks with three degrees of freedom are 10% lower than the ones with two degrees of freedom.

     

Black Nickel Coating and Color Anodized Layers for Solar Absorber

Solar selective absorbers are considered as an essential part of a thermal solar collector for which the optical properties are dependent upon their structure and surface morphology. In this paper, optical properties of Ni-pigmented anodized are compared with black electroless nickel coatings. The effect of heat treatment on optical properties of the coatings was also investigated. Anodized films were formed in 6 M phosphoric acid followed by a black coloration process. Scanning electron microscope was used to study the morphology, and X-ray diffraction was employed to identify the phases present. Evaluation of optical properties was carried out by spectral reflectance. Evaluation of the optical characteristics showed that Ni-pigmented anodized and black electroless samples, after heat treatment, had the highest absorption coefficient at about 0.98 as well as the lowest emission coefficient. The ξ factor reached about 6 in heat treated Ni-pigmented anodized layer and offered optimal properties in this research.