Analysis of an extensive measurement program developed from the start up to the follow up of the operation of the CNAAA NPP

Integrated tests (IT) applied to the Units I and II of the CNAAA Nuclear Power Plants (Angra dos Reis, Rio de Janeiro, Brazil) vara part of a comprehensive test program required to have the commercial operational licence issued. The IT cover operation at zero power and the subsequent power levels (the power escalation) until the nominal power operation.

This paper reports and compares the results of systematic neutron and gamma equivalent dose-rate measurements performed inside and outside the reactor containment of each Unit, during the start-up phase of the operation, for different power levels of the reactors. It also compares the collective-doses measured along the operation of the two units of the CNAAA wich similar data of the Grafenrheinfeld nuclear power plant (Germany) — basic-of-project for the CNAAA — Unit II — and analyses the data under the fight of the state-of-art.     

Electric field effects on roto-vibrational transitions of13CD3OH1

We used a Stark-Optoacoustic cell and hybrid waveguide resonators to perform an Infrared and Far Infrared Stark Spectroscopy study on some transitions of¹³CD₃OH. Different behaviours of the transitions in the presence of a d.c. electric field were observed. The Stark splittings of six FIR laser lines ranging from 34 to 136 MHz/kVcm^?1 were determined. The analysis of the behaviour of the IR and FIR transitions in the presence of the external electric fields gives important and exclusive information on the levels involved in the transitions.     

Trends in Hydrological Parameters of a Southern Brazilian Watershed and its Relation to Human Induced Changes

The Piracicaba river basin is a subtropical watershed located in the southeastern region of Brazil. With an area of 12 400 km², the basin is a typical example of new landscape resulting from development in tropical and sub-tropical regions: establishment of intensive industrial and agricultural processes were followed by significant population growth and water management. This scenario has led to significant increase in water demand and decrease in water quality. The main objective of this study is the detection of changes in the patterns of flow and precipitation in the basin, and its possible relation to man-induced changes. Statistical analyses were performed on records of precipitation, evapotranspiration and streamflow, from 1947 to 1991. Precipitation and evapotranspiration totals showed significant increasing trends for the entire basin. From eight streamflow gauge stations, half showed significant decreasing trend. The most probable cause of such trends is the export of water from the basin to the metropolitan region of São Paulo city.     

Multi-level simulation of metal-forming processes

The IBF has for some years made use of finite element programmes to solve metal-forming problems. In the course of this investigation, it has become evident that a problem-oriented adaptation of FEM simulation to the problem in hand is beneficial in terms of computation effort. The computation time for the process parameters is optimised in a multi-level simulation. At level 1 (global analysis) integral parameters such as the required force and required work are computed using a coarse FEM mesh. At level 2 (local analysis) an optimised number of elements is used to determine continuum mechanics parameters like stress, strain and temperature. Microscopic phenomena are simulated at level 3 (microscopic analysis), using special micro-material elements and thermodynamic models.     

Investigation for long wavelength fir laser lines for EPR studies: New lines from CH2=CF2

The results described in this work are part of a systematic search for long wavelength laser lines to be used in high magnetic field EPR applications and in plasma diagnostic. Four new far-infrared laser lines of CH₂ = CF₂ (1,1 difluoroethylene), optically pumped by a waveguide CO₂ laser, have been discovered and characterized in wavelength, polarization relative to the pumping radiation and offset relative to the CO₂ center frequency. New measurements of polarization and offset of 5 already known laser lines are also reported. A table of all of the known CO₂ pumped FIR laser lines from this molecule is given.     

Coupled temperature and moisture effects on the tensile behavior of strain hardening cementitious composites (SHCC) reinforced with PVA fibers

This paper reports the experimental findings on the tensile behavior of strain-hardening cement-based composites (SHCC). The composites were subjected to the combined effects of elevated temperatures and internal moisture condition. Uniaxial tensile tests on dumbbell-shaped SHCC specimens with in situ temperature control were performed at 22, 60 and 100 °C. In addition, the effect of the internal humidity of SHCC (95, 50, 20 and 0%) coupled to the elevated temperatures was investigated. It was shown that the tensile strength decreases and the strain capacity increases with an increase in temperature. The influence of the internal moisture conditions was more significant in high temperatures. The strain capacity reduced significantly with a decrease in the humidity level. The crack pattern of the SHCC specimens was determined. Furthermore, single fiber pullout tests were performed under the considered high temperatures condition. Finally, the results are discussed based on the thermogravimetry analysis of the PVA fiber, alterations on its microstructure and surface coating.     

The effect of stocking density and a blind on the behavior of Holstein dairy cows in group maternity pens. Part II: Labor length,lying behavior,and social behavior

In natural settings, dairy cows separate from the herd to give birth. When kept indoors, seeking isolation before calving may be restricted and may depend on space and resources provided in maternity housing. The effect of group maternity pens on behavior around calving and labor progress is unknown. Therefore, the objective of this study was to determine the effects of stocking density and provision of a blind in group bedded pack maternity pens on lying and social behavior as well as length of labor of preparturient dairy animals. The study was conducted as a complete randomized block design with a 2 × 2 factorial arrangement of treatments including stocking density and presence or absence of a blind, resulting in a total of 4 treatments: (1) high stocking density (7.7–12.9 m² lying space/cow) with a blind, (2) low stocking density (15.4–25.8 m²) with a blind, (3) high stocking density without a blind, and (4) low stocking density without a blind. A total of 127 primiparous heifers and 247 multiparous cows were housed in mixed-parity groups from approximately 3 wk before and immediately after calving. During the 4 h before calving, lying behavior (lying time and bouts) was collected automatically using accelerometers, and social behavior (agonistic interactions, allogrooming, and attention from other cows), stage II labor duration, and frequency of position change during stage II labor were collected using video. Lying behavior was collected with accelerometers. Regardless of treatment, lying time and bouts increased as calving approached. Cows and heifers performed more lying bouts in low stocking density pens compared with high stocking density pens. Agonistic interactions and allogrooming were not different between treatments. Other cows spent more time paying attention to focal animals regardless of stocking density as calving approached, but time spent paying attention was reduced by the presence of a blind during h ?2 before calving. The hazard of calving unassisted was greater for cows and heifers in low stocking density pens with a blind compared with all other treatments. Further, animals in pens with a blind tended to change positions fewer times during stage II labor. These results suggest that providing a blind in group maternity pens may improve the calving environment for cows and heifers and, in combination with low stocking density, may reduce the amount of time spent in labor.     

Gain scheduling adaptive control applied to a particular mixer-settler equipment

The mixer-settler based on phase inversion (MSBPI) is a system used for treatment of wastewaters in order to reduce the content of oils and greases from wastewaters produced in oil industry. Its operation principle combines mixing, extraction and separation by decantation in a unique process. In particular, for control purpose, the level of the interface between organic solvent and water, in the separation section, is a critical variable to guarantee performance and security during operation of the MSBPI. In this work, an image-based detector to monitor the organic solvent–water interface level is proposed and a feedback control loop for the process is presented. Initially, a conventional controller (PID) was implemented and, subsequently, a strategy of gain scheduling adaptive control was developed in order to improve the process response in closed-loop. The experimental results showed that the adaptive control presented an efficient performance, even when disturbances of significant magnitude were applied to the process.