Evolution of corrosion products and metal release from Galvalume coatings on steel during short and long-term atmospheric exposures

Non-treated Galvalume (55% Al, 43.4% Zn and 1.6% Si by weight) coatings have been studied through a combination of surface, near surface and bulk analysis after exposure at marine conditions, and for comparison also in an urban test site and in successively more complex short-term laboratory exposures. Slightly polished Galvalume surfaces exhibit dendritic aluminum-rich areas with higher Volta potential compared with interdendritic zinc-rich areas. These effects were not observed on bare as-received surfaces due to the overall presence of aluminum oxide. As a result, preferential corrosion occurred initially in interdendritic areas. The zinc release rate followed the same time-dependence as the surface coverage of zinc-containing phases at the marine exposure condition with zinc predominantly released compared to aluminum. Short term laboratory exposures generated the same main phases as formed at marine conditions. This confirms that the evolution of corrosion products and time dependence of zinc release rates can be explained by the uniform formation of less soluble Al₂O₃, AlOOH and Al(OH)₃ compared to observed zinc-containing phases, e.g. ZnO, zinc hydroxycarbonate and zinc hydroxychloride. The same underlying mechanism is believed to operate also during exposure of Galvalume in the urban site studied.     

Tafel slopes used in monitoring of copper corrosion in a bentonite/groundwater environment

The harmonic analysis, the polarization resistance, and the noise resistance methods have been applied in an effort to monitor corrosion of pure copper in a bentonite/groundwater environment with commercially available equipment. Without the need to use a reference electrode, the first method supplies not only an estimate of the corrosion rate, but also estimates of Tafel slopes required by the other methods. The recorded corrosion rate is overestimated but to a varying degree. While the recorded corrosion rates for the first two methods give quite similar values far below 3 μm/year, the electrochemical noise resistance method gives considerably higher values.     

Superparamagnetic Twist‐Type Actuators with Shape‐Independent Magnetic Properties and Surface Functionalization for Advanced Biomedical Applications

Directed nanoparticle self‐organization and two‐photon polymerization are combined to enable three‐dimensional soft‐magnetic microactuators with complex shapes and shape‐independent magnetic properties. Based on the proposed approach, single and double twist‐type swimming microrobots with programmed magnetic anisotropy are demonstrated, and their swimming properties in DI‐water are characterized. The fabricated devices are actuated using weak rotating magnetic fields and are capable of performing wobble‐free corkscrew propulsion. Single twist‐type actuators possess an increase in surface area in excess of 150% over helical actuators with similar feature size without compromising the forward velocity of over one body length per second. A generic and facile combination of glycine grafting and subsequent protein immobilization exploits the actuator's increased surface area, providing for a swimming microrobotic platform with enhanced load capacity desirable for future biomedical applications. Successful surface modification is confirmed by FITC fluorescence.     

Elastic Properties and Structure of Interpenetrating Boron Carbide/Aluminum Multiphase Composites

We study the elastic moduli and structure of boron carbide/aluminum (B₄C/Al) multiphase composites using rigorous bounding and experimental characterization techniques. We demonstrate that rigorous bounds on the effective moduli are useful in that they can accurately predict (i) the effective elastic moduli, given the phase moduli and volume fractions, or (ii) the phase moduli (volume fractions), given the effective moduli and phase volume fractions (moduli). Using the best available rigorous bounds on the effective elastic moduli of multiphase composites involving volume-fraction information, we are able to predict the bulk and shear moduli of the Al₄BC phase, a reaction product that forms during heat treatment. These theoretical predictions are in very good agreement with recent experimental measurements of the moduli of the Al₄BC phase. Moreover, we evaluate more-refined bounds involving three-point structural correlation functions by extracting such information from an image of a sample of the B₄C/Al composite. Although experimental data for the effective moduli are unavailable for this sample, our predictions of the effective moduli based on three-point bounds should be quite accurate.     

A simulation study of the combined thermoelectric extracellular stimulation of the sciatic nerve of the Xenopus laevis: the localized transient heat block

The electrical behavior of the Xenopus laevis nerve fibers was studied when combined electrical (cuff electrodes) and optical (infrared laser, low power sub-5?mW) stimulations are applied. Assuming that the main effect of the laser irradiation on the nerve tissue is the localized temperature increase, this paper analyzes and gives new insights into the function of the combined thermoelectric stimulation on both excitation and blocking of the nerve action potentials (AP). The calculations involve a finite-element model (COMSOL) to represent the electrical properties of the nerve and cuff. Electric-field distribution along the nerve was computed for the given stimulation current profile and imported into a NEURON model, which was built to simulate the electrical behavior of myelinated nerve fiber under extracellular stimulation. The main result of this study of combined thermoelectric stimulation showed that local temperature increase, for the given electric field, can create a transient block of both the generation and propagation of the APs. Some preliminary experimental data in support of this conclusion are also shown.     

Occurrence and fate of corrosion-induced zinc in runoff water from external structures

This paper comprises data from an extensive cross-disciplinary research project aiming to elucidate the environmental fate of corrosion-induced zinc release from external structures. It includes an exposure assessment that provide long-term runoff rates, concentrations and chemical speciation of zinc, from 14 zinc-based materials exposed during 5 years in Stockholm, Sweden, and an effect assessment including bioavailability and ecotoxicity measurements, both at the immediate release situation and after soil interaction. Runoff rates of total zinc ranged from 0.07 to 2.5 g Znm-2 yr-1 with zinc primarily released as the free ion for all materials investigated. The average effect concentration, causing a 50% growth reduction after 72 h to the green algae Raphidocelis subcapitata, was at the immediate release situation 69 microg ZnL-1. Upon interaction of runoff water with soil, which simulated 18 to 34 years of exposure, the total zinc concentration was significantly reduced, from milligram per litre to microgram per litre levels. Simultaneously, the most bioavailable fraction of zinc in runoff, the hydrated zinc(II)-ion, decreased from more than 95% to about 30%. The major fraction, 98-99%, of the introduced total zinc concentration in the runoff water was retained within the soil. As long as the soil retention capacity was not reached, this resulted in zinc concentrations in the percolate water transported through the soil layer, close to background values and below growth inhibition concentrations for the green algae investigated. Zinc retained in soil was to a large extent (85-99.9%) extractable with EDTA, and available for plant uptake after 5 to 7 months of ageing.     

Empirical Mode Decomposition: Real-Time Implementation and Applications

This paper presents the development of the time-frequency technique, known as the Hilbert–Huang Transform (HHT) into a real-time analysis environment. By looking at the intrinsic elements of the transform we develop a novel strategy for computationally efficient and accurate real-time analysis. Test signals, as well as analysis on EEG and ECG signals for detecting relevant features are presented in support of our methodology. Additional unique insight is shown in some of the intrinsic elements of the algorithm, including some known errors in the use of the popular cubic spline method. Discussions of the primary design considerations and trade-offs are described throughout, aiming at a rounded view of what a real-time HHT implementation involves.     

Release rates of chromium and nickel from 304 and 316 stainless steel during urban atmospheric exposure—a combined field and laboratory study

Release rates of chromium and nickel from pickled and skin passed 304 and 316 stainless steel have been determined during a one-year field exposure in an urban environment (Stockholm, Sweden) and through complementary exposures in artificial rain. Measured annual release rates from 304 stainless steel are 0.25-0.3 mg Cr/m² and 0.3-0.4 mg Ni/m², and slightly higher from 316 stainless steel, 0.35-0.4 mg Cr/m² and 0.7-0.8 mg Ni/m². The release rates decrease as the rain pH increases and exhibit no direct influence by rain intensity. Variations in release rates are thought to be a result of a non-uniformly attack.     

Modeling study of the light stimulation of a neuron cell with channelrhodopsin-2 mutants

Channelrhodopsin-2 (ChR2) has become a widely used tool for stimulating neurons with light. Nevertheless, the underlying dynamics of the ChR2-evoked spikes are still not yet fully understood. Here, we develop a model that describes the response of ChR2-expressing neurons to light stimuli and use the model to explore the light-to-spike process. We show that an optimal stimulation yield is achieved when the optical energies are delivered in short pulses. The model allows us to theoretically examine the effects of using various types of ChR2 mutants. We show that while increasing the lifetime and shuttering speed of ChR2 have limited effect, reducing the threshold irradiance by increased conductance will eliminate adaptation and allow constant dynamic range. The model and the conclusion presented in this study can help to interpret experimental results, design illumination protocols, and seek improvement strategies in the nascent optogenetic field.