Logarithmic wavelength demultiplexers

A general approach for a full 1 /spl times/ N demultiplexer using a tree of filter stages is proposed. The device architecture is compact, requiring at least N - 1 filter stages, and flexible, as each filter stage can be arbitrarily designed, with the only constraint of the half-band power property. The filters can be realized using any optical filtering techniques as thin-film interference, Bragg gratings, or planar delay-line circuits. The performances of the proposed architecture are illustrated with respect to different lattice-form finite impulse response (FIR) and infinite impulse response (IIR) filter stages, showing that the demultiplexer inherently presents low crosstalk and flat passband. A design example of a 1 /spl times/ 4 demultiplexer consisting of three all-pass (AP) filters is compared with a generalized Mach-Zehnder interferometer (MZI) with four AP filters in its arms, showing that the two approaches achieve similar results.     

Developing wearable bio-feedback systems: a general-purpose platform

Microprocessors, even those in PocketPCs, have adequate power for many real-time biofeedback applications for disabled people. This power allows design of portable or wearable devices that are smaller and lighter, and that have longer battery life compared to notebook-based systems. In this paper, we discuss a general-purpose hardware/software solution based on industrial or consumer devices and a C++ framework. Its flexibility and modularity make it adaptable to a wide range of situations. Moreover, its design minimizes system requirements and programming effort, thus allowing efficient systems to be built quickly and easily. Our design has been used to build two brain computer interface systems that were easily ported from the Win32 platform.     

A covert attention P300-based brain-computer interface: Geospell

The Farwell and Donchin P300 speller interface is one of the most widely used brain-computer interface (BCI) paradigms for writing text. Recent studies have shown that the recognition accuracy of the P300 speller decreases significantly when eye movement is impaired. This report introduces the GeoSpell interface (Geometric Speller), which implements a stimulation framework for a P300-based BCI that has been optimised for operation in covert visual attention. We compared the Geospell with the P300 speller interface under overt attention conditions with regard to effectiveness, efficiency and user satisfaction. Ten healthy subjects participated in the study. The performance of the GeoSpell interface in covert attention was comparable with that of the P300 speller in overt attention. As expected, the effectiveness of the spelling decreased with the new interface in covert attention. The NASA task load index (TLX) for workload assessment did not differ significantly between the two modalities. PRACTITIONER SUMMARY: This study introduces and evaluates a gaze-independent, P300-based brain-computer interface, the efficacy and user satisfaction of which were comparable with those off the classical P300 speller. Despite a decrease in effectiveness due to the use of covert attention, the performance of the GeoSpell far exceeded the threshold of accuracy with regard to effective spelling.     

The use of EEG modifications due to motor imagery for brain-computer interfaces

The opening of a communication channel between brain and computer [brain-computer interface (BCI)] is possible by using changes in electroencephalogram (EEG) power spectra related to the imagination of movements. In this paper, we present results obtained by recording EEG during an upper limb motor imagery task in a total of 18 subjects by using low-resolution surface Laplacian, different linear and quadratic classifiers, as well as a variable number of scalp electrodes, from 2 to 26. The results (variable correct classification rate of mental imagery between 75% and 95%) suggest that it is possible to recognize quite reliably ongoing mental movement imagery for BCI applications.     

Laguerre-Gauss and Bessel-Gauss beams in uniaxial crystals

A simple correspondence between the paraxial propagation formulas along the optical axis of a uniaxial crystal and inside an isotropic medium is found in the case of beams with linearly polarized circularly symmetric boundary distributions. The electric fields of the ordinary and the extraordinary beams are related to the corresponding expressions in a medium with refractive index n(o) and n(e)2/n(o), where n(o) and n(e) are the ordinary and the extraordinary refractive indexes, respectively. Closed-form expressions for Laguerre-Gauss and Bessel-Gauss beams propagating through an anisotropic crystal are given.     

Hyperchaotic behaviour of two bi‐directionally coupled Chua's circuits

In this paper, a non‐linear bi‐directional coupling of two Chua's circuits is presented. The coupling is obtained by using polynomial functions that are symmetric with respect to the state variables of the two Chua's circuits. Both a transverse and a tangent system are studied to ensure a global validity of the results in the state space. First, it is shown that the transverse system is an autonomous Chua's circuit, which directly allows the evaluation of the conditions on its chaotic behaviour, i.e. the absence of synchronization between the coupled circuits. Moreover, it is demonstrated that the tangent system is also a Chua's circuit, forced by the transverse system; therefore, its dynamics is ruled by a time‐dependent equation. Thus, the calculus of conditional Lyapunov exponents is necessary in order to exclude antisynchronization along the tangent manifold. The properties of the transverse and tangent systems simplify the study of the coupled Chua's circuits and the determination of the conditions on their hyperchaotic behaviour. In particular, it is shown that hyperchaotic behaviour occurs for proper values of the coupling strength between the two Chua's circuits. Finally, numerical examples are given and discussed. Copyright © 2002 John Wiley & Sons, Ltd.     

Optimization of wide-band linear arrays

An optimization method is proposed for linear arrays to be used in ultrasound systems under wide-band operation. A fast algorithm, the threshold accepting, has been utilized to determine the element positions and weight coefficients of a linear array that generates a desired beam pattern. To reduce the computational burden in the optimization procedure, an efficient numerical routine for the beam pattern evaluation has been implemented. We address the optimization problem of both dense and sparse wideband arrays. In the first case, the goal is to minimize the side-lobe energy by varying the element weights; we compare the optimized beam pattern with that obtained with classical shading functions, showing that better results can be achieved with a wide-band optimization. We also consider the optimization of the layout (positions and weights) of a sparse linear array to achieve a desired beam pattern with a fixed or minimum number of array elements. The comparison of the proposed method with a narrow-band optimization algorithm is presented, showing that better performances (about -7 dB further reduction of the side-lobe level) can be achieved with a wide-band sparse array optimization. Further numerical simulations are given, showing that the proposed method yields better results than wideband sparse random arrays and periodic arrays with the same aperture width     

Design of optical full encoders/decoders for code-based photonic routers

This paper demonstrates that standard multiplexers as generalized Mach-Zehnder interferometers or waveguide grating routers can be designed to generate/process a set of orthogonal optical codes (OCs) with very high-correlation performances. The same device can be used at the ingress node of a generalized multiprotocol label switching network to generate the photonic labels and at each routing node to perform all the correlations simultaneously. To enhance the code cardinality, without increasing the code length, this paper shows that it is possible to use the proposed encoder/decoder architectures to generate/process multidimensional OCs.     

Linear classification of low-resolution EEG patterns produced by imagined hand movements.

Electroencephalograph (EEG)-based brain-computer interfaces (BCI's) require on-line detection of mental states from spontaneous EEG signals. In this framework, surface Laplacian (SL) transformation of EEG signals has proved to improve the recognition scores of imagined motor activity. The results we obtained in the first year of an European project named adaptive brain interfaces (ABI) suggest that: 1) the detection of mental imagined activity can be obtained by using the signal space projection (SSP) method as a classifier and 2) a particular type of electrodes can be used in such a BCI device, reconciling the benefits of SL waveforms and the need for the use of few electrodes. Recognition of mental activity was attempted on both raw and SL-transformed EEG data from five healthy people performing two mental tasks, namely imagined right and left hand movements.