Phase change process with free convection in a circular enclosure: numerical simulations

A numerical study of unsteady natural convection flow during freezing of water in a circular enclosure is presented. Mathematical model for phase change is based on apparent capacity method formulation and the governing equations are discretized on a fixed grid by means of finite element method. Water’s temperature is initially higher than its freezing temperature. Then, the temperature of the enclosure’s boundary is dropped to a temperature lower than freezing temperature. Ice forms at the enclosure boundary while natural convection flow is induced in the liquid region. Calculations have been made for the rate of change of solid fraction and temperature distributions, for conduction and conduction plus convection modes of heat transfer, and density inversion near freezing temperature phenomenon of water is considered. High resolution capturing of solid/liquid moving boundary as well as the details of flow structure is presented. The results indicate that the effect of natural convection is dominant over conduction if the Rayleigh number is higher than 5 × 10⁶ and relatively insignificant if the Rayleigh number is less than 1 × 10⁶.     

Reaction of dithiocarbamates with malononitrile dimer; simple synthesis of new 1,4-dihydropyridine-2-thiols

Dithiacarbamates reacted with malononitrile dimer to give 1,4-dihydropyridine-2-thiols. The structures of the obtained products were proven by IR, mass, and NMR spectra and elemental analyses. The reaction mechanism is also discussed.     

A THREE-PHASE MODEL FOR SORPTION ISOTHERM IN ZEOLITE ADSORBENTS

A three-phase model for adsorption in zeolite cavities is proposed. The adsorbed molecules are taken to be distributed between a surface layer and a dense phase filling the rest of the cavity volume. This model is a more realistic representation of molecules in zeolite cages especially at high pressures. The equation for the adsorption isotherm, based on this model, has two contributions: a surface term and a dense phase term. The dense phase contribution was estimated from a simple equation that obeys the limiting values at low and high pressures. The surface contribution can be estimated from the existing surface adsorption models. When all model parameters are estimated from molecular and literature data, the combination of the two terms was found to be an improvement over traditional treatment of adsorption data of a number of gases in zeolite-A for a wide range of pressures. However, new models for the adsorbed phase that account for sorbate-sorbate repulsive forces correctly are needed for accurate prediction of adsorption data.     

Detection of debonding in composite-aluminum joints using gamma-ray Compton scattering

Gamma-ray Compton scattering is used for the detection of debonding in adhesively bonded composite-aluminum joints. A collimated narrow beam of monochromatic photons, generated by a ¹³⁷CS source, is directed towards the joint and scattered photons are recorded, using a detector located on the same side as the source. The energy of the scattered radiation is measured and related to the angle of scattering. The occurrence of debonding is indicated by a change in the count rate at an energy corresponding to its location. The performance of the technique is successfully demonstrated experimentally for joints of different adhesive-bonding thicknesses and for artificially induced debonds.     

Performance study on a structured packed liquid desiccant regenerator

The solution carryover in traditional desiccant regeneration towers is of serious concern in real applications especially when using triethylene glycol (TEG) as a desiccant. In this study, the cellulose rigid media pads are used as the structured packing. The packing arrangements have provided minimum carryover of TEG. A performance study of the simultaneous heat and mass transfer between air and desiccant in a structured packed-stripping tower is conducted. Through the study of the regenerator, important design variables are defined and the regenerator performance is compared with the previous studies. The effects of air and liquid flow rates, air humidity, desiccant temperature and desiccant concentration have been reported on the evaporation rate and humidity effectiveness of the column. It is found that high liquid flow rates do not have a significant effect on the performance variables.     

Performance enhancement of the DSRC system using frequency-domain equalization for 5.9 GHz DSRC applications

This paper proposes the use of equalization concepts in frequency domain that exploit the frequency domain channel matrix to combat inter-carrier interference (ICI) instead of inter-symbol interference (ISI) in 5.9 GHz Dedicated Short Range Communications (DSRC) systems. The physical layer (PHY) of DSRC is currently being developed by work group of IEEE 802.11p. The conventional system currently assumes static channel characteristics. Channel tracking schemes were investigated and the Viterbi-aided channel estimation scheme was proposed for DSRC systems that did not explicitly exploit the ICI components caused by the time-varying channels. The performance of the DSRC system is investigated for a time-varying channel using a conventional DSRC model, a decision-directed (Viterbi-aided) channel estimation model, and the frequency-domain equalization design. It is shown that the DSRC system with the frequency-domain equalization achieves a considerable performance enhancement compared to both the conventional and the Viterbi-aided channel estimation schemes in terms of both packet error rate (PER) and bit error rate (BER) at relatively high and low velocities.     

Computationally efficient methods for blind decision feedback equalization of QAM signals

This paper investigates computationally efficient methods for blind decision feedback equalization (DFE) that reduce the complexity and power requirements of blind equalization algorithms while maintaining their steady-state characteristics for quadrature amplitude modulation (QAM) signals. These include the power-of-two error (POT), selective coefficient update (SCU), and frequency-domain block (FDB) methods. A novel radius-directed stop-and-go (RSG) method is introduced, which selectively adjusts the equalizer tap coefficients based on the equalizer output radius. In addition, a new activation/de-activation method based on the equalizer output radius is utilized to control the feedback equalizer (FBE) of the DFEs. Simulation studies and analysis are provided for empirically derived cable and microwave channels and Ricean fading channels.     

Evolutionary Intelligence and Deep Learning Enabled Diabetic Retinopathy Classification Model

Diabetic Retinopathy (DR) has become a widespread illness among diabetics across the globe. Retinal fundus images are generally used by physicians to detect and classify the stages of DR. Since manual examination of DR images is a time-consuming process with the risks of biased results, automated tools using Artificial Intelligence (AI) to diagnose the disease have become essential. In this view, the current study develops an Optimal Deep Learning-enabled Fusion-based Diabetic Retinopathy Detection and Classification (ODL-FDRDC) technique. The intention of the proposed ODL-FDRDC technique is to identify DR and categorize its different grades using retinal fundus images. In addition, ODL-FDRDC technique involves region growing segmentation technique to determine the infected regions. Moreover, the fusion of two DL models namely, CapsNet and MobileNet is used for feature extraction. Further, the hyperparameter tuning of these models is also performed via Coyote Optimization Algorithm (COA). Gated Recurrent Unit (GRU) is also utilized to identify DR. The experimental results of the analysis, accomplished by ODL-FDRDC technique against benchmark DR dataset, established the supremacy of the technique over existing methodologies under different measures.     

Compact Patch Antenna Array for 60 GHz Millimeter-Wave Broadband Applications

Wireless Personal Communications - In this study, a wide-band compact patch antenna array is developed for 60 GHz band applications. The antenna array consists of eight identical elements....     

Adaptive device-to-device communication using Wi-Fi Direct in smart cities

Wi-Fi Direct has become vastly popular in the last few years. Due to its fast network setup and the provision of high transmission rates, it is expected to be the piggyback technology for high speed device-to-device communications in smart cities. The increasing demand on Wi-Fi Direct networks and its co-location in the same band with other Wi-Fi ad-hoc and infrastructure networks have entailed the need for developing new adaptive techniques to utilize the wireless spectrum efficiently. In this paper, we introduce, analyze and implement a self-organizing algorithm designed specifically for pop-up Wi-Fi Direct networks. The algorithm dynamically changes the operating channels of pop-up Wi-Fi Direct networks according to their performance in a non-cooperative manner. It utilizes the spectrum efficiently, reduces congestion and enhances performance. Moreover, the modified Wi-Fi Direct network running the proposed algorithm is interoperable with all other Wi-Fi network modes and setups and does not affect their functionalities. On the contrary, it enhances their performance implicitly. We implement the algorithm using the driver of RTL8188CUS chipset in a Linux environment and conduct experiments to evaluate its performance. The obtained results illustrate the benefits of using the proposed algorithm.