Robust backward adaptive formant prediction for speech coder

To improve the error performance of speech coders, an adaptation method for the backward adapted formant predictor is proposed. The filtered residual signal is used instead of the reconstructed output signal as the input to an adaptation of the formant predictor. The performance of the filtered-residual driven adaption method in the noise free channel is as good as that of conventional output driven adaptation. Moreover, the new adaptation method maintains the same robustness to channel errors as residual driven adaptation     

The microstructures of laser-alloyed Ni-Ta surface layers

Evaporated thin tantalum films on single and polycrystalline nickel have been laser surface alloyed using either continuous-wave CO₂ or Q-switched Nd-YAG radiation. In the case of the continuous-wave laser, surface alloys contain amorphous tantalum-rich regions, intermediate polycrystalline bands of TaNi, and an underlying Ni(Ta) solid solution. In the Q-switched laser case, a much more laterally uniform amorphous phase with approximately equal atomic fractions of nickel and tantalum is found, with little evidence of polycrystalline intermetallics.In situ annealing with the electron beam of the microscope results in formation of microcrystallites, predominantly nickel.     

What results when firms implement practices: The differential relationship between specific practices, firm financial performance, customer service, and quality.

Previous research on organizational practices is replete with contradictory evidence regarding their effects. Here, the authors argue that these contradictory findings may have occurred because researchers have often examined complex practice combinations and have failed to investigate a broad variety of firm-level outcomes. Thus, past research may obscure important differential effects of specific practices on specific firm-level outcomes. Extending this research, the authors develop hypotheses about the effects of practices that (a) enable information sharing, (b) set boundaries, and (c) enable teams on 3 different firm-level outcomes: financial performance, customer service, and quality. Relationships are tested in a sample of observations from over 200 Fortune 1000 firms. Results indicate that information-sharing practices were positively related to financial performance 1 year following implementation of the practices, boundary-setting practices were positively related to firm-level customer service, and team-enabling practices were related to firm-level quality. No single set of practices predicted all 3 firm-level outcomes, indicating practice-specific effects. These findings help resolve the theoretical tension in the literature regarding the effects of organizational practices and offer guidance as to how to best target practices to increase specific work-related outcomes. Implications for theory, research, and practice are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The Metaflow architecture

The Metaflow architecture, a unified approach to maximizing the performance of superscalar microprocessors, is introduced. The Metaflow architecture exploits inherent instruction-level parallelism in conventional sequential programs by hardware means, without relying on optimizing compilers. It is based on a unified structure, the DRIS (deferred-scheduling, register-renaming instruction shelf), that manages out-of-order execution and most of the attendant problems. Coupling the DRIS with a speculative-execution mechanism that avoids conditional branch stalls results in performance limited only be inherent instruction-level parallelism and available execution resources. Although presented in the context of superscalar machines, the technique is equally applicable to a superpipelined implementation. Lightning, the first implementation of the Metaflow architecture, which executes the Sparc RISC instruction set is described     

Cigarette smoking and quitting behaviors among unemployed adults in the United States.

Little is known about factors associated with smoking among the unemployed. This study estimated the prevalence of smoking and examined sociodemographic factors associated with current, former, and successful quitting among unemployed adults aged 18-64. Cross-sectional data on 13,480 participants in the 1998-1999 and 2001-2002 Tobacco Use Supplements to the Current Population Surveys were analyzed. Multivariate logistic regression analyses were used to examine factors associated with study outcomes (current vs. never, former vs. current, successful quitter vs. other former smoker). Among the unemployed, 35% were current smokers and 13% were former smokers. Of the former smokers, 81% quit successfully for at least 12 months. Participants with family incomes of less than US$25,000 were more likely than those with incomes of $50,000 or more to currently smoke (OR=2.13, 95% CI=1.85-2.46). Service workers and blue-collar workers were less likely than white-collar workers to report former smoking. Participants unemployed for 6 months or more were twice as likely as those unemployed for less than 6 months to quit successfully (OR=2.05, 95% CI=1.07-3.95). Unemployed blue-collar workers had a greater odds ratio of successfully quitting than white-collar workers (OR=1.83, 95% CI=1.17-2.87). Smoking rates were high among the unemployed, and quitting behaviors varied by sociodemographic factors and length of unemployment. Studies are needed to examine the feasibility of cessation interventions for the unemployed.     

Shear and extensional flow of reinforced plastics in injection molding. I. Effects of temperature and shear rate with bulk molding compound

Capillary flow studies on bulk molding compound (BMC) using an instrumented injection-molding machine are reported. The significance of extensional flow effects with fiber-reinforced materials is emphasized. The extensional flow behavior in converging dies is modeled, and a means of evaluating both extensional and shear viscosity from capillary flow data is proposed. Methods of correcting results for the effect of deformation heating are discussed. The shear and extensional flow behavior of BMC in the temperature region 18 to 58°C can be fitted to a simplified Arrhenius Law.     

Cellular mechanisms underlying carbachol-induced oscillations of calcium-dependent membrane current in smooth muscle cells from mouse anococcygeus

1. At a holding potential of -40 mV, carbachol (50 microM) produced a complex pattern of inward currents in single smooth muscle cells freshly isolated from the mouse anococcygeus. Membrane currents were monitored by the whole-cell configuration of the patch-clamp technique. Previous work has identified the first, transient component as a calcium-activated chloride current (ICl(Ca)) and the second sustained component as a store depletion-operated non-selective cation current (I(DOC)). The object of the present study was to examine the cellular mechanisms underlying the third component, a series of inward current oscillations (I(oscil)) superimposed on I(DOC). 2. Carbachol-induced I(oscil) (amplitude 97 +/- 11 pA; frequency 0.26 +/- 0.02 Hz) was inhibited by the chloride channel blocker anthracene-9-carboxylic acid (A-9-C; 1 mM), and by inclusion of 1 mM EGTA in the patch-pipette filling solution. 3. In calcium-free extracellular medium (plus 1 mM EGTA), carbachol produced an initial burst of oscillatory current which lasted 94 s before decaying to zero; I(oscil) could be restored by re-admission of calcium. The frequency, but not the amplitude, of I(oscil) increased with increasing concentrations of extracellular calcium (0.5-10 mM). 4. Inclusion of the inositol triphosphate (IP3) receptor antagonist heparin (5 mg ml(-1) in the patch-pipette filling solution, or pretreatment of cells with the sarcoplasmic reticulum (SR) calcium ATPase inhibitor cyclopiazonic acid (CPA; 10 microM), prevented the activation of I(oscil) by carbachol. Caffeine (10 mM) activated both ICl(Ca) and I(DOC) and prevented the induction of I(oscil) by carbachol. Caffeine and CPA also abolished I(oscil) in the presence of carbachol, as did both a low (3 microM) and a high (30 microM) concentration of ryanodine. 5. Carbachol-induced I(oscil) was abolished by the general calcium entry blocker SKF 96365 (10 MM) and by Cd2+ (100 microM), but was unaffected by La3+ (400 microM). As found previously, I(DOC) was also blocked by SKF 96365 and Cd2+, but not La3+; the inhibition of I(DOC) preceded the abolition of I(oscil) by 27 s with SKF 96365 and by 30 s with Cd2+. Nifedipine (1 microM) produced a partial inhibition of the carbachol-induced I(oscil) frequency at holding potentials of -20 mV and -60 mV and, in addition, reduced I(DOC) at -60 mV by 18%. 6. It is concluded that carbachol-induced inward current oscillations in mouse anococcygeus cells are due to a calcium-activated chloride current, and reflect oscillatory changes in cytoplasmic calcium ion concentration. These calcium oscillations are derived primarily from the SR stores, but entry of calcium into the cell is necessary for store replenishment and maintenance of the oscillations. Capacitative calcium entry (via I(DOC) appears to be important not only for sustained contraction of this tissue, but also as a route for re-filling of the SR and, therefore, represents an important target for the development of novel and selective drugs.     

A constrained joint source/channel coder design

The design of joint source/channel coders in situations where there is residual redundancy at the output of the source coder is examined. It has previously been shown that this residual redundancy can be used to provide error protection without a channel coder. In this paper, this approach is extended to conventional source coder/convolutional coder combinations. A family of nonbinary encoders is developed which more efficiently use the residual redundancy in the source coder output. It is shown through simulation results that the proposed systems outperform conventional source-channel coder pairs with gains of greater than 9 dB in the reconstruction SNR at high probability of error     

The application of nonlinear structures to the reconstruction ofbinary signals

The problem of reconstructing digital signals which have been passed through a dispersive channel and corrupted with additive noise is discussed. The problems encountered by linear equalizers under adverse conditions on the signal-to-noise ratio and channel phase are described. By considering the equalization problem as a geometric classification problem the authors demonstrate how these difficulties can be overcome by utilizing nonlinear classifiers as channel equalizers. The manner in which neural networks can be utilized as adaptive channel equalizers is described, and simulation results which suggest that the neural network equalizers offer a performance which exceeds that of the linear structures, particularly in the high-noise environment, are presented     

Surface-mediated effects on porous polymer monolith formation within capillaries

The formation of a porous polymer monolith (PPM) is influenced by the physico-chemical properties of the wall surface of its container. This influence can have a dramatic effect on the resulting monolith morphology depending on the nature and composition of the wall. Indeed, a dense polymer layer or “sheath”, distinct from the bulk porous material, has been observed at the wall surface of capillaries, and thus a study was undertaken to explore the dependence of this layer on the hydrophobicity of the surface. A range of silanizing reagents were used to modify the surface of the fused silica capillary, including aminopropyl, trimethylsilyl, octadecyl and perfluorooctyl functionalities. Crosslinked butyl acrylate-based PPM was formed in the modified capillaries and extruded. SEM images of the monoliths were used to examine the sheath morphology and thickness, which are discussed with respect to surface hydrophobicity.