Availability of systems with partially observable failures

The availability is determined for the following kind of system. When the system is operational (up), it can fail in either one of two modes. However, the system operator does not always diagnose the failure mode correctly. Given that one failure mode has occurred, the authors correctly diagnose the failure mode with a given probability η and misdiagnose it with probability 1-η, where η may vary with failure mode. The problem is modeled by a partially observable Markov process. Numerical results indicate that a high probability of misdiagnosis produces appreciably high system-downtime     

Softening phenomenon by remilling of styrene–butadiene copolymer rubber–general-purpose polystyrene resin blend

The softening phenomenon by remilling of uncured blends of various commercia styrene—butadiene copolymer rubber (styrene content, 23.5 to 48 wt-%, styrene block 0 to 18 wt-%) with general-purpose polystyrene resin was mainly studied by examining the blend ratio dependence of hardness and compression modulus (in logarithmic form), with special attention to the state of dispersion of the polymers. It was found that the blend of styrene—butadiene copolymer rubber with general-purpose polystyrene resin forms a microheterogeneous polymer blend system and that the hardness and the compression modulus change in S-shaped curves versus blend ratio. However, the degree of softening phenomenon by remilling (roll surface temperature, 70°–90°C) was found to be different for the two blend systems, i.e., random styrene—butadiene copolymer rubber and block styrene—butadiene copolymer rubber. The softening phenomenon is more pronounced in random-type rubbers; and in some block-type rubbers, no softening phenomenon was observed. The influence of the styrene content of the polymer is small. Further discussions have shown us that the strong interaction between the polystyrene block of the copolymer and the styrene homopolymer of the general-purpose polystyrene resin controls the state of dispersion of polymers thereby causing this difference in the softening phenomena among the different kinds of styrene—butadiene copolymer rubbers.     

Microwave-assisted desulfurization of NOx storage-reduction catalyst

The activity of NO_x storage-reduction (NSR) catalysts is greatly reduced by sulfur poisoning, caused by the SO₂ present in the exhaust stream. Desorption of sulfur species from poisoned NSR catalysts occurs at temperatures in excess of 600 °C using reducing atmospheres and conventional heating. In this work, microwave (MW) heating has been used to promote desulfurization of poisoned NSR catalysts. The experiments were carried out by heating the catalyst with MW radiation and using hydrogen as the reducing gas. Desorption of H₂S at 200 °C was observed. Desorption at even lower temperatures (150 °C) was observed when water was introduced to the system. In the presence of water, sulfur species desorbed as both H₂S and SO₂. An overall reduction of sulfur species of about 60% was obtained. The use of MW heating proves to be an efficient way to achieve regeneration of poisoned NSR catalysts.     

16.7-fA/cell tunnel-leakage-suppressed 16-Mb SRAM for handling cosmic-ray-induced multierrors

Tunnel-leakage currents become the dominant form of leakage as MOS technology advances. An electric-field-relaxation scheme that suppresses these currents is described. Cosmic-ray-induced multierrors have now become a serious problem at sea level. An alternate error checking and correction architecture for the handling of such errors is also described, along with the application of both schemes in an ultralow-power 16-Mb SRAM. A test chip fabricated by using 0.13-/spl mu/m CMOS technology showed per-cell standby-current values of 16.7 fA at 25/spl deg/C and 101.7 fA at 90/spl deg/C. The chip provided a 99.5% reduction in soft errors under accelerated neutron-exposure testing.     

Multi-server threshold queues with hysteresis

A queueing system with K servers operates in the following manner. When the system is empty, arriving customers are attended by only one server. A set of forward threshold values is defined so that at epochs at which the number of customers in the system exceeds a forward threshold value an extra server is added. Similarly, a set of reverse threshold values is defined so that at epochs at which the number of customers in the system becomes less than a reverse threshold value one server is removed. The forward and reverse threshold values are assumed to be different. Closed-form occupancy distribution and mean delay of customers in the system are obtained by the Green's function method.     

Thin-foil studies of hydrated Portland cement

Ion-beam milling has been used to produce thin-foils of hardened cement paste for examination in an analytical scanning transmission electron microscope (STEM). Resin impregnation has been usefully employed to support delicate microstructure, especially that of young pastes, so that cross-sections of hydrating cement grains can be examined. The morphologies observed in STEM are similar to those observed in conventional scanning electron microscope (SEM) studies.     

HIV and pregnancy: risks of transmission and therapeutic possibilities

In Europe, transmission of HIV-1 during pregnancy occurs in 14% of children born to HIV-infected women. Risk factors for transmission are (1) virus load measured by p-24 antigenemia and HIV RNA level, (2) low CD4+ lymphocyte counts (below 600/microliter, (3) placental membrane inflammation and (4) time interval between membrane rupture and delivery. Breast feeding and vaginal delivery increase the risk of transmission of HIV infection. Antiretroviral therapy with zidovudine (Retrovir) at a dose of 500 mg/day reduces the transmission of HIV infection by two thirds. No malformation of the newborn due to zidovudine has been reported so far, but the possibility of unknown long-term adverse effects on children exposed to zidovudine must be weighed against the benefit of a considerable decrease in HIV transmission. Pregnancy is not associated with a higher rate of progression to AIDS, and HIV infection has no adverse effect on the pregnancy outcome in asymptomatic women.