Regional chemotherapy of liver tumors

In the absence of adequate autogenous vein for tibial artery bypass in limb salvage surgery, the use of prosthetic grafts with a distal anastomotic vein cuff or patch has shown promising results. Here, we describe how the Florester Internal Vessel Occluder (Meadox UK, Bedfordshire, UK) can facilitate the construction of a distal anastomotic vein cuff.     

Modeling the tensile properties in β-processed α/β Ti alloys

The development of a set of computational tools that permit microstructurally based predictions for the tensile properties of commercially important titanium alloys, such as Ti-6Al-4V, is a valuable step toward the accelerated maturation of materials. This paper will discuss the development of neural network models based on a Bayesian framework to predict the yield and ultimate tensile strengths of Ti-6Al-4V at room temperature. The development of such rules-based model requires the population of extensive databases, which in the present case are microstructurally based. The steps involved in database development include producing controlled variations of the microstructure using novel approaches to heat treatments, the use of standardized stereology protocols to characterize and quantify microstructural features rapidly, and mechanical testing of the heat-treated specimens. These databases have been used to train and test neural network models for prediction of tensile properties. In addition, these models have been used to identify the influence of individual microstructural features on the tensile properties, consequently guiding the efforts toward development of more robust mechanistically based models. Based on the neural network model, it is possible to investigate the influence of individual microstructural features on the tensile properties, and in certain cases these dependencies can point toward unrecognized phenomena. For example, the apparently unexpected trend of increase in tensile strength with increasing prior β-grain size has led to the determination of the pronounced role of the basketweave microstructure in strengthening these alloys, especially in case of larger prior β grains. This article is based on a presentation made in the symposium “Computational Aspects of Mechanical Properties of Materials,” which occurred at the 2005 TMS Annual Meeting, February 13–17, 2005, in San Francisco, CA, under the auspices of the MPMD-Computational Materials Science & Engineering (Jt. ASM-MSCTS) Committee.     

Acidolysis Reaction of Sal Fat (Shorea robusta) with Palmitic Acid

Acidolysis reaction of sal fat (Shorea robusta) with palmitic acid has been studied in relation to the operating variables like catalyst system and concentration, reaction temperature and time and molar ratios of reactants with the object of introducing more palmitic acid which is low in sal fat. The results demonstrate that as low as 2.5% and as high as 39% palmitic acid can be introduced in sal fat at the expense of other acids under the influence of various operating conditions. The products obtained differ from original sal fat in respect of chemical composition and slip point. The importance of such study is that there are possibilities of getting plastic fats of diverse properties for edible and industrial uses.     

Study of polyaniline polyacrylamide composites by positron annihilation technique

Polyaniline doped with nonoxidizing Bronsted acids is recognized as a conducting material, as its electrical conductivity changes with percentage of doping. In the present work, different percentages of doped polyaniline were blended with polyacrylamide and their electrical conductivities as well as the positron annihilation lifetimes were measured. Analysis of data yielded three lifetime components. It was observed that the value of the short lifetime component remained constant for doping concentration, whereas that of the intermediate component τ₂ decreased. The relative intensity pertaining to τ₂, however, increased with the increase in doped PANI concentration. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 930–933, 2003     

High molecular weight polypropylene nanospheres: Synthesis and characterization

The high molecular weight (MW) polypropylene with average particle size of 60 nm was synthesized by controlled growth mechanism using Ziegler–Natta catalyst. The atomic force microscopy (AFM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) studies showed that PP nanoparticles were spherical in shape. Structure and crystallinity were concomitantly studied through Fourier transform infrared spectroscopy and X‐ray diffraction, respectively. It shows nanospherical PP particles with more crystallinity (～ 75%) compared with macrosized PP (～ 59%). In addition, differential scanning calorimetry studies revealed the finite particle size effect on T_g and the scale dependence T_g followed a first order exponential trend. As particle size goes down to nano‐ scale from macrosize, continuous elevation of T_g's were observed from ?25 to ?11°C. This phenomenon was directed to configuration entropy of single spherical nanoparticles of PP. The mechanical properties and surface roughness were also evaluated through AFM. At last, the properties of nanosized PP were compared with micron and macrosized particles. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Conducting blends of poly(o‐toluidine) and ethylene–propylene–diene terpolymer

Poly(o‐toluidine) (POT) is an electroactive polymer with poor mechanical and thermal characteristics. We examined the scope for improving such properties by making blends of POT with ethylene–propylene–diene rubber (EPDM). We prepared POT–EPDM blends containing different weight fractions of POT by intimately mixing known volumes of separate solutions of the two polymers (POT in THF and EPDM in toluene). Films of EPDM and POT–EPDM blends in solution were obtained by spreading, solvent evaporation, and film casting techniques. POT, EPDM, and their blends were characterized in solution by ultraviolet‐visible spectroscopy, and the respective dried samples were analyzed by Fourier transform infrared spectroscopy and thermogravimetry. The polymer samples were further analyzed morphologically by scanning electron microscopy, and their tensile strengths were also evaluated. Spectroscopic and thermal studies of the blends indicated some sort of interaction between the two constituent polymers. The direct current electrical conductivity of the blends in increasing order of POT loading (12.5–100%) was in the range 9.9 × 10^?5 to 11.6 × 10^?2 S cm^?1. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2550–2555, 2003     

Epoxy‐montmorillonite clay nanocomposites: Synthesis and characterization

Nanocomposites of epoxy resin with montmorillonite clay were synthesized by swelling of different proportions of the clay in a diglycidyl ether of bisphenol‐A followed by in situ polymerization with aromatic diamine as a curing agent. The montmorillonite was modified with octadecylamine and made organophilic. The organoclay was found to be intercalated easily by incorporation of the epoxy precursor and the clay galleries were simultaneously expanded. However, Na‐montmorillonite clay could not be intercalated during the mixing or through the curing process. Curing temperature was found to provide a balance between the reaction rate of the epoxy precursor and the diffusion rate of the curing agent into the clay galleries. The cure kinetics were studied by differential scanning calorimetry. The exfoliation behavior of the organoclay system was investigated by X‐ray diffraction. Thermogravimetric analysis was used to determine the thermal stability, which was correlated with the ionic exchange between the organic species and the silicate layers. The morphology of the nanocomposites was evaluated by scanning electron microscopy. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2201–2210, 2004     

Harmony search algorithm for infinite impulse response system identification

In this paper, optimal sets of filter coefficients are searched by a meta-heuristic optimization technique called Harmony Search (HS) algorithm for infinite impulse response (IIR) system identification problem. For different optimization problems, HS algorithm undergoes three basic rules; namely Random Selection (RS), Harmony Memory Consideration (HMC), and Pitch Adjustment (PA) rules, which are inspired from the process that the musicians use to improvise a perfect state of harmony with the consummate skill of blending notes in tune. With the help of the properly selected control parameters, a perfect balance is achieved in exploration and exploitation in searching phases. The detailed analysis of simulation results emphasizes the strength of HS algorithm to find the near-global optimal solution, quality of convergence profile and the speed of convergence while tested against standard benchmark examples for same and reduced order models.     

Modification of non‐Newtonian flow behavior of aqueous solution of poly(vinyl alcohol) by conducting polypyrrole prepared by in situ polymerization of pyrrole

The rheological behavior of an aqueous solution of poly(vinyl alcohol) (PVA) and polypyrrole (PPY) dispersions prepared by ferric chloride (FeCl₃)‐catalyzed polymerization of pyrrole was investigated at 12°C using a coaxial rotational viscometer. The results show that the addition of a low dose of FeCl₃ to the PVA solution greatly influences its rheology. The prominent shear‐thickening (dilatant) nature of PVA turns significantly pseudoplastic (shear thinning) in the presence of FeCl₃. Polypyrrole‐loaded PVA was obtained in a stable, optically clear dispersion by in situ polymerization of pyrrole in an aqueous PVA solution (5%) using FeCl₃ as the oxidative catalyst at 12°C. The PPY dispersions in aqueous PVA systems having a low loading of PPY and low Fe⁺³ content retain the dilatant character of an aqueous PVA solution; however, for an aqueous PVA system having a relatively high PPY loading and also a high Fe⁺³ content, prominent pseudoplastic (shear thinning) behavior is exhibited. The odd novel rheological patterns exhibited by a PVA solution in the absence and presence of FeCl₃ and the PVA–PPY dispersions containing FeCl₃ under different sets of conditions are explained on the basis of the complexation of PVA by Fe⁺³ and related ions and also as a consequence of some degree of H‐bonding and chemical grafting between the support polymer PVA and the PPY formed. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3737–3741, 2004