Effect of electric field on the hydrodynamics of fluidized nanoparticles

The effect of electric field on the hydrodynamics of nanoparticles was studied in a fluidized rectangular bed, with electrodes attached to two parallel walls. It was shown that the electric field of the order of 3 times the gravity markedly decreased the bed expansion and increased the solids volume fraction of nanoparticles fluidized by air. In these experiments, a light diode assembly was utilized to infer the local solids volume fractions within a rectangular bed of 10 nm silica particles. These experimental measurements yielded a two dimensional solids volume fraction distribution within the rectangular bed. The experimental results provided some new insights into the distribution of solids within the bed. The agglomerate diameters were computed using a momentum balance with the drag given by the Ergun equation and the empirical Richardson-Zaki method. Both methods yielded agglomerate diameters of the order of 100 μm and showed dependence on the strength of the electric field. The electric field decreased the granular temperature of the nanoparticles.     

3-D shape from a shaded and textural surface image

A new 3D texture model is developed by considering the scene image as the superposition of a random texture image on a smooth shaded image. The whole image is analyzed using a patch-by-patch process. Each patch is assumed to be a tilted and slanted texture plane. A modified reflectance map function is applied to describe the deterministic part, and the fractional differencing periodic model is chosen to describe the random texture because of its good performance in texture synthesis and its ability to represent the coarseness and the pattern of the surface at the same time. An orthographical projection technique is developed to deal with this particular random model, which has a nonisotropically distributed texture pattern. For estimating the parameter, a hybrid method that uses both the least square and the maximum-likelihood estimates is applied directly to the given intensity function. By using these parameters, the synthesized image is obtained and used to reconstruct the original image     

Demonstration of a semiconductor external cavity laser using a UVwritten grating in a planar silica waveguide

The authors report the first demonstration of a semiconductor external cavity waveguide laser, modulated at 2.5 Gbit/s over 100 km of standard optical fibre using a UV written grating in a planar silica waveguide as the feedback element     

Performance Optimizations for Deploying VoIP Services in Mesh Networks

In the recent past, there has been a tremendous increase in the popularity of VoIP services as a result of huge growth in broadband access. The same voice-over-Internet protocol (VoIP) service poses new challenges when deployed over a wireless mesh network, while enabling users to make voice calls using WiFi phones. Packet losses and delay due to interference in a multiple-hop mesh network with limited capacity can significantly degrade the end-to-end VoIP call quality. In this work, we discuss the basic requirements for efficient deployment of VoIP services over a mesh network. We present and evaluate practical optimizing techniques that can enhance the network capacity, maintain the VoIP quality and handle user mobility efficiently. Extensive experiments conducted on a real testbed and ns-2 provide insights into the performance issues and demonstrate the level of improvement that can be obtained by the proposed techniques. Specifically, we find that packet aggregation along with header compression can increase the number of supported VoIP calls in a multihop network by 2-3 times. The proposed fast path switching is highly effective in maintaining the VoIP quality. Our fast handoff scheme achieves almost negligible disruption during calls to roaming clients     

Experimental demonstration of step-like dispersion profiling inoptical fibre for soliton pulse generation and compression

Generation of 100 GHz trains of 500-700 fs pulses using dual-frequency beat conversion in a step-like dispersion profiled fibre is reported. The authors believe that this is the first time the generation and compression of soliton pulses using such a fibre has been demonstrated. The fabrication of such fibre assemblies does not require any special facilities and relies only on conventional optical fibre technology. They believe that the use of profiling the fibre dispersion by fibre segments instead of continuously dispersion-decreasing fibre is not only possible but preferable in many applications     

Effect of praseodymium substitution on the growth and properties of Y1−x Pr x Ba2Cu3O7−δ (o <x < 0·4) single crystals

In the present paper, a modified self-flux technique has been successfully employed for the growth of pure and praseodymium substituted (partially) large single crystals of high temperature superconducting Y_1−x Pr _x Ba₂Cu₃O_7−δ (x = 0·0,0·2,0·4). Typical sizes of the platy and bulky crystals of pure YBCO(123) material are ≈ 2 × 2 × 0·1 mm³ and 4 × 1 × 1 mm³, respectively. In case of Pr-substitution, the typical sizes of platy and bulky crystals of Y_0·8Pr_0·2Ba₂Cu₃O_7−δ and Y_0·6Pr_0·4Ba₂Cu₃O_7−δ materials are ≈ 2 × 3 × 0·1 mm³ and 5 × 1 × 1 mm³ and ≈ 1 × 1·5 × 0·1 mm³ and 7 × 0·2 × 0·1 mm³, respectively. The morphology and growth habit of the as-grown single crystals and the critical transition temperature (T _c) of the oxygenated crystals were found to depend on the Pr-content. Paper presented at the poster session of MRSI AGM VI, Kharagpur, 1995     

Object-oriented intelligent computer-integrated design, processplanning, and inspection

The methodology for developing intelligent integrated computer-aided design and manufacturing systems based on object-oriented principles is discussed. The ways in which the application of these principles affects the nature of these systems are reviewed. The implementation of an automated, intelligent, and flexible computer-integrated-manufacturing (CIM) system prototype using an object-oriented programming environment (Smalltalk-80, Version 4.0) is detailed. A CIM system includes CAD, a process planner, and an inspection planner. Each of these components is discussed individually     

Influence of variables in nickel-manganese-zinc alloy plating from a sulphate bath

An Ni-Mn-Zn alloy has been satisfactorily electrodeposited from a sulphate bath containing nickel sulphate (20–23 g dm⁻³), manganese sulphate (76–88 g dm⁻³), zinc sulphate (18–24 g dm⁻³), ammonium sulphate (30 g dm⁻³), thiourea (18g dm⁻³) and ascorbic acid (0.8 g dm⁻³) under various plating conditions, namely, current density 1.0–3.0 A dm⁻²; temperature 30–45° C; pH 2.7–4.2 and duration of electrolysis 15–30 min. Semibright, blackish-grey, thin films were generally deposited with the proportion of nickel and manganese in the deposits increasing with increasing current density, temperature and duration of electrolysis. However, the amount of zinc increased as the pH of the solution was raised. The cathode efficiency for alloy deposition increased linearly as the temperature or the pH of the solution was decreased, whereas at any particular pH and temperature it continuously rose with increasing current density or the time of deposition. The cathode polarization shifted to more negative values on increasing the current density and to less negative values at higher pH values and temperatures which consequently lowered the throwing power under the latter conditions.