A CMOS integrated circuit for multichannel multiple-subjectbiotelemetry using bidirectional optical transmissions [weightlessnessin space effects application]

A CMOS integrated circuit for a noninvasive biological-signal telemetry system specified for use in medical and physiological studies of the influence of weightlessness in space is presented. The system can monitor multichannel (4 channels maximum) biological signals from multiple subjects (4 subjects maximum) in real time by using time multiplexing. A key technique so-called synchronized multiple-subject telemetry, to achieve multiple-subject telemetry has been proposed. This technique utilizes bidirectional optical transmissions with direct and scattered infrared lights between an observer and each of the subjects. An experimental CMOS IC to give a small light-weight low-power, and smart telemetry instrument for use on animals has been developed. This IC is for evaluating circuit blocks of the implantable monolithic telemetry instrument. The major circuit blocks include CMOS digital circuits for synchronization, subject selection and time multiplexing, analog circuits for pulse interval modulation, and other blocks such as a CMOS optical pulse receiver and an LED driver. A preliminary experimental multichannel telemetry from two subjects has been performed with the implemented IC chips, and the principal operation of the multiple-subject optical biotelemetry has been demonstrated     

Transmission of correct gaze direction in video conferencing using screen-embedded cameras

In this paper, we propose a new video conferencing system that presents correct gaze directions of a remote user by switching among images obtained from multiple cameras embedded in a screen according to a local user’s position. Our proposed method reproduces a situation like that in which the remote user is in the same space as the local user. The position of the remote user to be displayed on the screen is determined so that the positional relationship between the users is reproduced. The system selects one of the embedded cameras whose viewing direction towards the remote user is the closest to the local user’s viewing direction to the remote user’s image on the screen. As a result of quantitative evaluation, we confirmed that, in comparison with the case using a single camera, the accuracy of gaze estimation was improved by switching among the cameras according to the position of the local user.

     

Partial redundancy elimination for access expressions by speculative code motion

We present a new memory access optimization for Java to perform aggressive code motion for speculatively optimizing memory accesses by applying partial redundancy elimination (PRE) techniques. First, to reduce as many barriers as possible and to enhance code motion, we perform alias analysis to identify all the regions in which each object reference is not aliased. Secondly, we find all the possible barriers. Finally, we perform code motions in three steps. For the first step, we apply a non‐speculative PRE algorithm to move load instructions and their following instructions in the backwards direction of the control flow graph. For the second step, we apply a speculative PRE algorithm to move some of them aggressively before the conditional branches. For the third step, we apply our modified version of a non‐speculative PRE algorithm to move store instructions in the forward direction of the control flow graph and to even move some of them after the merge points. We implemented our new algorithm in our production‐level Java just‐in‐time compiler. Our experimental results show that our speculative algorithm improves the average (maximum) performance by 13.1% (90.7%) for jBYTEmark and 1.4% (4.4%) for SPECjvm98 over the fastest algorithm previously described, while it increases the average (maximum) compilation time by 0.9% (2.9%) for both benchmark suites. Copyright © 2004 John Wiley & Sons, Ltd.     

A High-Speed, High-Sensitivity Digital CMOS Image Sensor With a Global Shutter and 12-bit Column-Parallel Cyclic A/D Converters

This paper presents a high-speed, high-sensitivity 512times512 CMOS image sensor with column parallel cyclic 12-bit ADCs and a global electronic shutter. Each pixel has a charge amplifier for high charge-to-voltage conversion gain despite of using a large-size photodiode, and two sample-and-hold stages for the global shutter and fixed pattern noise (FPN) canceling. High-speed column-parallel cyclic ADC arrays with 12-bit resolution having a small layout size of 0.09 mm ² are integrated at both sides of image array. A technique for accelerating the conversion speed using variable clocking and sampling capacitance is developed. A digital gain control function using 14-bit temporal digital code is also set in the column parallel ADC. The fabricated chip in 0.25-mum CMOS image sensor technology achieves the full frame rate in excess of 3500 frames/s. The in-pixel charge amplifier achieves the optical sensitivity of 19.9 V/lxmiddots. The signal full scale at the pixel output is 1.8 V at 3.3-V supply and the noise level is measured to be 1.8mV_rms, and the resulting signal dynamic range is 60 dB     

A Low-Power Low-Voltage 10-bit 100-MSample/s Pipeline A/D Converter Using Capacitance Coupling Techniques

This paper presents a low-power low-voltage 10-bit 100-MSample/s pipeline analog-to-digital converter (ADC) using capacitance coupling techniques. A capacitance coupling sample-and-hold stage achieves high SFDR with 1.0-V supply voltage at a high sampling rate. A capacitance coupling folded-cascode amplifier effectively saves the power consumption of the gain stages of the ADC in a 90-nm digital CMOS technology. The SNDR and the SFDR are 55.3 dB and 71.5 dB, respectively, and the power consumption is 33 mW     

Analogue MOS current-mode circuits for three-dimensional integrated smart image sensor

An image processing technique using analogue MOS current-mode circuits is presented. This approach is of interest in smart image sensors based on three-dimensional (or multi-layered) VLSI structures. High-performance smart image sensors with high resolution can be realised because the number of transistors required for image processing in each pixel is greatly reduced.<>     

Multiple-valued radix-2 signed-digit arithmetic circuits forhigh-performance VLSI systems

VLSI-oriented multiple-valued current-mode MOS arithmetic circuits using radix-2 signed-digit number representations are proposed. A prototype adder chip is implemented with 10-μm CMOS technology to confirm the principle of operation. A multiplication scheme using four-input current-mode wired summations for realizing a high-speed small-size multiplier is presented. The 32×32-b multiplier is composed of 18800 transistors and required fewer interconnections. The multiply time is estimated to be 45 ns by SPICE simulation in 2-μm CMOS technology. It is shown that the technology is also potentially effective for the reduction of the data-bus area in VLSI     

Evaluation of the antithrombogenicity of a new microdomain structured copolymer

A new antithrombogenic material was studied, fluorine-acryl-styrene-urethane-silicone (FASUS) copolymer, the theoretical basis of which attributed to its hydrophilic and hydrophobic microdomain structure. In this series of experiments, the blood compatibility of this copolymer was evaluated in vitro and ex vivo. For the in vitro evaluation, a whole blood clotting test and the microsphere column test were performed. For the ex vivo evaluation, two series of shunt tests in rabbits were performed, one was the arterioartery (A-A) shunt model, and the other was the arteriovenous (A-V) shunt model. The antithrombogenicity was assessed by measuring the shunt obstructive time in the A-A shunt experiment. The A-V shunt experiment was assessed by measuring the circulating platelet counts, platelet aggregability, activated partial thromboplastin time (APTT), and prothrombin time (PT). In the whole blood clotting test, FASUS revealed the significantly longer blood clotting time than that of the control glass tubings (19.7 +/- 1.0 versus 6.5 +/- 0.7 min, p < 0.001). In the microsphere column test, the coated group had a 30% reduction of the platelet number in the eluted blood in contrast with a marked decrease of 70% in the control group (p < 0.05). In the ex vivo A-A shunt experiment, the occlusion time for the FASUS-coated group was significantly longer than that of the control (109.7 +/- 17.3 versus 3.0 +/- 0.4 min, p < 0.05). The A-V shunt experiment showed that the FASUS copolymer suppressed the decrease in platelet counts and tended to improve prolonged APTT compared with that of the control. Clinically, in 25 patients, we placed coated FASUS copolymer into the cannulas for use in percutaneous cardiopulmonary support (PCPS) procedures. There was no evidence of thrombus on the blood contacting surface and no thromboembolism in major organs clinically or upon postmortem examination. In summary, this new copolymer may be effective in preventing thrombus formation in vitro, ex vivo, and in clinical situations.     

A 32×32-bit multiplier using multiple-valued MOS current-modecircuits

A 32×32-bit multiplier using multiple-valued current-mode circuits has been fabricated in 2-μm CMOS technology. For the multiplier based on the radix-4 signed-digit number system, 32×32-bit two's complement multiplication can be performed with only three-stage signed-digit full adders using a binary-tree addition scheme. The chip contains about 23600 transistors and the effective multiplier size is about 3.2×5.2 mm², which is half that of the corresponding binary CMOS multiplier. The multiply time is less than 59 ns. The performance is considered comparable to that of the fastest binary multiplier reported     

Development and evaluation of a palm-sized optical PM2.5 sensor

A new palm-sized optical PM_2.5 sensor has been developed and its performance evaluated. The PM_2.5 mass concentration was calculated from the distribution of light scattering intensity by considering the relationship between scattering intensity and particle size. The results of laboratory tests suggested that the sensor can detect particles with diameters as small as ～0.3 µm and can measure PM_2.5mass concentrations as high as ～600 µg/m³. Year-round ambient observations were conducted at four urban and suburban sites in Fukuoka, Kadoma, Kasugai, and Tokyo, Japan. Daily averaged PM_2.5 mass concentration data from our sensors were in good agreement with corresponding data from the collocated standard instrument at the Kadoma site, with slopes of 1.07–1.16 and correlation coefficients (R) of 0.90–0.91, and with those of the nearest observatories of the Ministry of the Environment of Japan, at 1.7–4.1 km away from our observation sites, with slopes of 0.97–1.23 and R of 0.89–0.95. Slightly greater slopes were observed in winter than in summer, except at Tokyo, which was possibly due to the photochemical formation of relatively small secondary particles. Under high relative humidity conditions (>70%), the sensor has a tendency to overestimate the PM_2.5 mass concentrations compared to those measured by the standard instruments, except at Fukuoka, which is probably due to the hygroscopic growth of particles. This study demonstrates that the sensor can provide reasonable PM_2.5 mass concentration data in urban and suburban environments and is applicable to studies on the environmental and health effects of PM_2.5.

Copyright © 2018 American Association for Aerosol Research