Modeling of diffusional limitations in styrene acrylonitrile random bulk copolymerization

Diffusional limitations (the gel, glass, and cage effects) are manifested in several bulk free radical homopolymerizations as well as in random copolymerizations. These are associated with decreases of several orders of magnitude of the rate constants of termination, propagation, and initiation (the initiator efficiency), respectively. These phenomena have been modeled earlier using the free volume theory for the diffusivities of primary radicals, macro‐radicals, and monomer molecules, and have been applied to homopolymerizations. In this study, a similar model is developed for random bulk copolymerizations. The parameters of the model are fitted using isothermal data on styrene acrylonitrile random copolymerization carried out in small ampoules. Thereafter, best‐fit global correlations have been developed for this system. This enables the model to be used for studying non‐isothermal copolymerizations, as well as for carrying out optimization of industrial reactors, where non‐isothermal conditions are a norm. POLYM. ENG. SCI., 55:2098–2110, 2015. © 2014 Society of Plastics Engineers     

Complex formation of montmorillonite clay with polymers. Part 2: The use of montmorillonite clay–vinyl monomer complex as a comonomer in the copolymerization reaction of styrene–acrylonitrile monomers

The bulk copolymerization of styrene–acrylonitrile monomers using styrene‐N⁺–montmorillonite complex as a comonomer in the polymerization was studied. The X‐ray diffraction (XRD) analysis showed that part of the styrene‐N⁺–montmorillonite complex remained non‐dispersed (immiscible) and the copolymer was excluded from the interlayer of the immiscible part of the clay. The successive chemical extraction process revealed that a reasonable amount of the styrene–acrylonitrile copolymer was directly attached to the styrene‐N⁺–montmorillonite complex and enveloped the clay. Highly exfoliated clay lamella and nanospheres (3–5 nm) were observed by transmission electron microscopy (TEM). The montmorillonite clay assume two different morphologies, immiscible and exfoliated, on the basis of the XRD and TEM data. A simple method of calculation of the ratio of the exfoliated/immiscible amounts of the clay indicated that the amount of the styrene‐N⁺–montmorillonite complex exfoliated into separate lamella was 40 % (w/w) of the amount of the clay samples containing 2 % of the (styrene‐N⁺–montmorillonite complex) clay. This amount of exfoliated clay decreases with the increase of the concentration of the clay. The presence of the styrene‐N⁺–montmorillonite clay in the copolymerization reaction had a minor effect on both the copolymer composition and the molecular weight. Modification of the clay with the derivatized styrene monomer can achieve a nanocomposite using a percentage no more than 4 % (w/w) of complex in the copolymer. Copyright © 2004 Society of Chemical Industry     

Optimal size,hydraulic retention time and volatile solids loading rate of biogas unit using water hyacinth

With a view to evaluate the effects of hydraulic retention time and volatile solids loading rate on methane production using water hyacinth, experiments were conducted in a 160 dm³ capacity, well-mixed continuous digestion unit at ambient temperature. The optimal design of biogas plant using water hyacinth was elucidated, to provide a unit giving a maximum methane yield of 0.16 nm³ kg^?1 volatile solids added, which was 60% greater than the conventional plant using cowdung. The calculations of optimal design factors were based on reactor size, hydraulic retention time and volatile solids loading rate; considerations were made of capital cost, running costs and operational revenue.     

Thermal challenges in next generation electronic systems - summary of panel presentations and discussions

The presentations made, as well as the discussions, in the panels at the workshop, Thermal Challenges in Next Generation Electronic Systems (THERMES), are summarized in this paper. The panels dealt with diverse topics including thermal management roadmaps, microscale cooling systems, numerical modeling from the component to system levels, hardware for future high performance and Internet computing architectures, and transport issues in the manufacturing of electronic packages. The focus of the panels was to identify barriers to further progress in each area that require the attention of the research community.     

Zernike circle polynomials and optical aberrations of systems with circular pupils

Zernike circle polynomials, their numbering scheme, and relationship to balanced optical aberrations of systems with circular pupils are discussed.     

A Deep Learning Approach to Detection and Mitigation of Distributed Denial of Service Attacks in High Availability Intelligent Transport Systems

Mobile Networks and Applications - In the era of Internet of Things (IoT) powered by 5G technologies, Automobile Industry is headed towards a revolution. In Intelligent Transport Systems (ITS),...     

Green synthesis of highly stable carbon nanodots and their photocatalytic performance

The present study reports a novel, facile, biosynthesis route for the synthesis of carbon nanodots (CDs) with an approximate quantum yield of 38.5%, using Musk melon extract as a naturally derived‐precursor material. The synthesis of CDs was established by using ultraviolet–visible (UV–vis) spectroscopy, Dynamic light scattering, photoluminescence spectroscopy, X‐ray diffraction, transmission electron microscopy and Fourier transform infrared (FTIR) spectroscopy. The as‐prepared CDs possess an eminent fluorescence under UV–light (λ _ex  = 365 nm). The size range of CDs was found to be in the range of 5–10 nm. The authors further explored the use of such biosynthesised CDs as a photocatalyst material for removal of industrial dye. Degradation of methylene blue dye was performed in a photocatalytic reactor and monitored using UV–vis spectroscopy. The CDs show excellent dye degradation capability of 37.08% in 60 min and reaction rate of 0.0032 min⁻¹. This study shows that synthesised CDs are highly stable in nature, and possess potential application in wastewater treatment.Inspec keywords: carbon, nanostructured materials, nanofabrication, catalysis, photochemistry, ultraviolet spectra, visible spectra, photoluminescence, X‐ray diffraction, transmission electron microscopy, Fourier transform infrared spectra, fluorescence, dyesOther keywords: green synthesis, highly stable CD, photocatalytic performance, biosynthesis route, carbon nanodots, quantum yield, Musk melon extract, naturally derived‐precursor material, ultraviolet‐visible spectroscopy, dynamic light scattering, photoluminescence spectroscopy, X‐ray diffraction, transmission electron microscopy, Fourier transform infrared spectroscopy, FTIR spectroscopy, fluorescence, biosynthesised CD, photocatalyst material, industrial dye, methylene blue dye degradation, photocatalytic reactor, UV‐vis spectroscopy, wastewater treatment, size 5 nm to 10 nm, time 60 min     

Self-nanoemulsifying drug delivery system of docosahexanoic acid: development,in vitro,in vivo characterization

Context: Docosahexanoic acid (DHA) is an essential omega-3 fatty acid for normal brain development and its use has increased considerably in recent years.

Objective: The aim of this study is to develop and evaluate self-nanoemulsifying drug delivery systems (SNEDDS) of DHA for improved palatability, dispersibility and bioavailability.

Methods: The SNEDDS were prepared and evaluated for miscibility, employing different combinations of olive oil and soyabean oil as oil phase, Span 80, Span 20, soya phosphatidylcholine, Labrafil M 1944 CS as surfactants while Tween 80, PEG 400, Cremophor RH40 and propylene glycol as cosurfactants. Thermodynamically stable SNEDDS were characterized for dispersibility, self-emulsification time, droplet size, zeta potential along with sensory analysis. The optimized formulation was subjected to ex vivo and in vivo evaluation such as intestinal permeability, memory performance test, brain concentration and histopathology studies.

Results: The optimized SNEDDS formulation showed emulsification time of 27?±?4.7?s with droplet size of 17.6?±?3.5?nm and zeta potential of??37.6?±?0.5?mV. Intestinal absorption study depicted 18.3%, 21.5%, 41.5%, 98.7% absorption of DHA with SNEDDS-based formulation in comparison to 8.2%, 15.1%, 28.8%, 46.1% absorption of DHA with oil-based marketed formulation after 0.5, 1, 2 and 4?h. DHA concentration in brain homogenate was found to be increased to 2.6-fold in comparison to DHA-marketed formulation. This could be ascribed to enhanced dispersibility and bioavailability of DHA from nanosized formulation.

Conclusion: The developed formulation led to enhanced dispersibility and bioavailability of DHA due to the formation of nanodroplets.