A Statistical Model for Early Detection of DDoS Attacks on Random Targets in SDN

Wireless Personal Communications - Software Defined Networks (SDNs) have accelerated and simplified the management, configuration and error detection in today’s networking systems. However,...     

Finite element analysis of a center crack specimen warm pre-stressed under different modes of loading

Load bearing capacity of cracked specimens can be improved following pre-loading procedures like warm pre-stressing (WPS). In this paper, the effects of modes I and II pre-loading on fracture load of a central angled crack specimen are studied by finite element analysis. The specimen is reloaded either in mode I or in mode II. To predict the fracture load of cracked specimen after pre-loading, the maximum tensile stress (MTS) and maximum shear stress (MSS) criteria are used. It is shown that mode II fracture load is independent of pre-loading but the mode I fracture load is highly improved after warm pre-stressing. The mode mixity of the specimen is also changed when the pre-loading and reloading modes are not identical. An increase in the fracture load of the specimen following pre-loading may be due to change of failure mode as predicted by finite element analysis in this work.     

Inversion of inhomogeneous continuously varying dielectric profilesusing open-ended waveguides

The problem of reconstructing one-dimensional inhomogeneous, continuously varying dielectric profiles using open-ended waveguides is studied. The measured or available data-which are actually simulated here-consist of the self-admittance of the open-ended waveguide ending in a flange, put in contact with the dielectric medium to be inverted. The self-admittance of the waveguide radiating into the medium is then formulated. Choosing the Levenberg-Marquardt optimization algorithm, a search for a multilayered model with a sufficient number of layers-using successive refinements-is carried out until the admittance of the trial medium agrees closely, within a certain tolerance, with the admittance of the actual medium     

Characterization of silver-palladium submicronic powders

Various properties of submicronic silver-palladium powders (70/30 and 75/25 Ag/Pd % wt/wt), recently obtained by a new process of precipitation in aqueous solution, are described. These powders are intended to be used in the multilayer ceramic capacitor industry. The morphology of the particles has been analysed through various measurements, such as SEM images, tap density, BET surface area, and the size distribution by a sedimentation technique. The powders were found to be made of spherical shaped particles of mean diameter close to 0.3 m with a narrow size distribution. The individual grains were agglomerated only to a small extent. After being conditioned as a paste by blending with an organic binder, screen-printed and fired, the particles sintered into a conductive layer of low resistivity (15–30 Wcm for 2 m thickness) with only a few remaining voids, as observed by SEM. Thermal measurements indicated no melting of a pure silver phase at 960 °C, thus indicating that alloying was achieved before this temperature.     

ERES: an extended regular expression signature for polymorphic worm detection

Journal of Computer Virology and Hacking Techniques - The quick spreading of modern sophisticated polymorphic worms poses a serious threat to the internet security. So far, several signature...     

As cast acicular ductile aluminum cast iron

 The effects of 2.2% Ni and 0.6% Mo additions on the kinetics, microstructure and mechanical properties of ductile aluminum cast iron were studied in the as-cast and tempered conditions. Test bars machined from cast to size samples, were used for mechanical and metallurgical studies. The results showed that the addition of Ni and Mo to the base iron produces an upper bainitic structure resulting in an increase in strength and hardness. The same trend was shown when the test bars tempered from 300oC in the range of 300 to 400oC. The elongation increased with increasing the temperature from 300 to 400oC. The carbon content of the retained austenite also increased with increasing temperature. The results also showed that the kinetics, microstructure and mechanical properties of this iron are similar to Ni-Mo alloyed silicon ductile iron.     

Two-sided wind catcher performance evaluation using experimental,numerical and analytical modeling

Experimental wind tunnel and smoke visualization testing as well as CFD and analytical modeling were conducted to investigate the performance of a two-sided wind catcher. This type of wind catcher is divided internally into two halves for the purposes of air supply and extract. In this study, the two-sided wind catcher model was constructed of two similar one-sided wind catcher models, which were attached together back to back. These one-sided models are 1:40 scale models of Kharmani's School wind catcher in the city of Yazd. Experimental investigations were carried out using an open-circuit wind tunnel and both the induced volumetric airflow into the building and the pressure coefficients around all surfaces of the wind catcher model were measured at various wind angles. Furthermore, the CFD simulation was also used to evaluate the pressure coefficient distribution and airflow pattern around and through the wind catcher. Additional experimental tests and computational fluid dynamics simulation of the wind catcher in the wind tunnel were also conducted in order to assess the accuracy of measurement procedures and the uncertainty of experimental results. This article also represents a semi-empirical approach in which experimental data were used for a detailed analytic model, in order to provide an accurate estimate of the performance of wind catchers. It was found that for an isolated two-sided wind catcher model, the maximum efficiency is achieved at the angle of 90°. At this air incident angle the wind catcher efficiency increases approximately 20% more than the one at zero angle. The experimental investigations demonstrated the potential of two-sided wind catcher for enhancing the natural ventilation inside buildings. It can be seen that CFD simulation and analytical modeling results have a good agreement with the experimental results. Theoretical modeling can also help to assess the accuracy of measurement procedures and the uncertainty of experimental results.     

[Hmim][HSO4], a Green and Recyclable Acidic Ionic Liqiud Medium for the One‐Pot Nitration of TADB to HNIW

An efficient and mild procedure for the one‐pot preparation of CL‐20 from TADB in the presence of the Brønsted acidic ionic liquid 1‐methylimidazolium hydrogen sulfate [Hmim][HSO₄] as catalyst was developed. The ionic liquid was stable during the reaction process and could also be reused several times with steady activity. In order to optimize the process parameters to obtain higher yield and purity, a study was carried out with variation of the ionic liquids and some parameters like temperature, mole ratio of [Hmim][HSO₄] and nitric acid. This procedure may be a practical alternative to the existing procedures to meet the nees of academics as well as industry.