Numerical analysis of short-circuit safe operating area forp-channel and n-channel IGBTs

The mechanisms of destructive failure of an insulated gate bipolar transistor (IGBT) at short-circuit state are discussed. Results from two-dimensional numerical simulation of p-channel and n-channel IGBTs are presented. It is found that there are two types of destructive failure mechanisms: a secondary breakdown and a latchup. Which type is dominant in p-channel and n-channel IGBTs depends on an absolute value of forward voltage |V_CE|. At moderately low |V _CE|, the p-channel IGBT is destroyed by secondary breakdown, and the n-channel IGBT, by latchup. This is due to the difference of a type of flowing carrier crossing a base-collector junction of wide base transistor and ionization rates of electrons and holes     

Improving Software Development through Three Stages

In three stages covering 12 years and 16 projects, a software development group worked on attaining visible schedule control and usable software design documentation. The first stage identified two major problems: unstable code and schedule delays. The group used code inspection to address the immediate issue of code construction. In the second stage, the group formulated and implemented a software development process that addressed the entire software development life cycle. The third stage improved that process. The major factor in process improvement was the group's willingness to identify its mistakes and problems.     

Factors regulating SCC antigen expression in squamous cell carcinoma of the uterine cervix

Expression of squamous cell carcinoma (SCC) antigen emerged concurrently with squamous formation of the uterine cervix and increased during the neoplastic transformation of the cervical squamous epithelium. SCC antigen expression differed considerably among the histomorphologic cell types of cervical carcinoma. Large cell nonkeratinizing carcinoma contained high levels of the antigen. In contrast, no appreciable expression of SCC antigen was observed in small cell nonkeratinizing carcinoma. The pattern of SCC antigen expression closely coincided with EGF receptor (EGF-R) expression in cervical squamous neoplasia. This suggests that the expression of SCC and EGF-R in cervical carcinoma is related to the differentiation or dedifferentiation processes of the tumor cells. SCC production by CaSki cervical epidermoid carcinoma cells was stimulated by EGF. It seems likely that an autocrine system, in which EGF serves as the signal, may exist in cervical squamous carcinoma. 17beta-estradiol and L-triiodothyronine were found to upregulate EGF-R expression, proliferative potential and SCC production in the CaSki cervical carcinoma cells.     

Effects of growth temperature on the fatty acid composition of the free-living nematodeCaenorhabditis elegans

The effects of growth temperature on the fatty acid compositions of the phosphatidylcholine (PC), phosphatidylethanolamine (PE), and total lipid (TL) fractions of the free-living nematodeCaenorhabditis elegans were investigated. A reduction in growth temperature from 25 to 15°C caused the proportions of eicosapentaenoic acid (20∶5n-3) to increase from 23.6 to 32.5% in the PC, from 7.4 to 10.8% in the PE, and from 12.9 to 19.9% in the TL fractions. Conversely, the levels of dihomo-γ-linolenic acid (20∶3n-6) and arachidonic acid (20∶4n-6) in these phospholipid fractions and the TL fraction both decreased with decreasing growth temperature. Analysis of the positional distribution of fatty acids in the PC fraction revealed that the change in the composition of C₂₀ polyunsaturated fatty acid was obvious in positionsn-2. Lowering the growth temperature induced an increase in the level of the diacyl subclass of PE from 58% at 25°C to 71% at 15°C, with a concomitant decrease in the levels of the alkylacyl and alkenylacyl subclass of PE ofC. elegans. These changes observed in the phospholipids ofC. elegans might be one mechanism for adaptation to low temperature. Lipids 31, 1173–1178 (1996).     

Protective layer for high‐efficiency PDPs driven at low voltage

Abstract— The sustain pulse voltage of a panel for 66‐kPa Ne + Xe (5–30%) with an (SrCa)O protective layer is 20–40% lower than that with an MgO protective layer. The luminous efficiency of the panel with a Ne + Xe (30%) (SrCa)O protective layer is 1.5 times that of the conventional panel with a Ne + Xe (10%) MgO protective layer; the sustain pulse voltages of these panels are almost the same. The power loss caused by panel capacitance is proportional to the second power of the sustain pulse voltage. Using the (SrCa)O protective layer for Xe (5–30%), the power loss is reduced by 35–60% compared with the MgO protective layer. It follows that, using the (SrCa)O protective layer, we can increase the Xe content with little power loss and thus achieve high‐efficiency PDPs. As for MgO and CaO with Xe ions, electrons are probably ejected from only the defect states. On the other hand, as for the SrO with Xe ions, it is likely that electrons can be ejected from not only defect states but also the valance band. This seems to be the reason why the driving voltage is lower with the (SrCa)O protective layer than with the MgO protective layer.     

SrCaO Protective Layer for High-Efficiency PDPs

The sustain pulse voltage of the panel for 66-kPa Ne + Xe (5%-30%) is 20%-40% lower with a Sr_0.62Ca_0.38O protective layer than with a MgO protective layer. At a normal sustain voltage of 160-200 V, the luminous efficiency of the panel with the Sr_0.62 Ca_0.38O protective layer for Xe (30%) is about twice as high as with the MgO protective layer for Xe (10%). The luminances of these panels are almost the same. This high efficiency at normal sustain pulse voltage and normal luminance is obtained through the combined use of the Sr_0.62Ca_0.38O protective layer and high Xe content. With regard to ion bombardment, the Sr_0.62Ca_0.38O film has a 4.5 times longer life than SrO film and nearly 80% of the life of MgO film. We also calculated the values of theoretical secondary electron emission yield gamma_imin of MgO, SrO, and CaO without energy bands in the band gap for rare gas ions and found that [ gamma_imin of MgO] les [gamma_imin of CaO] < [gamma_imin of SrO] except for the one case with He. The breakdown voltage decreases with higher gamma_imin values. As expected, the discharge voltage of the panel is much lower with the SrO protective layer than with the MgO protective layer. The discharge voltages of the panels with Sr_0.62Ca_0.38O and SrO protective layers are almost the same. These findings show that the life of the SrO protective layer can be made 4.5 times longer without any increase in the discharge voltage by adding CaO (40 at.%)     

Denitrification and neutralization treatment by direct feeding of an acidic wastewater containing copper ion and high-strength nitrate to a bio-electrochemical reactor process.

The feasibility of the direct denitrification treatment of copper metal pickling wastewater by using a bio-electrochemical reactor process was investigated experimentally. Carbon electrodes were installed in the reactor as the anode and cathode and denitrifying microorganisms were fixed on the surface of the cathode. The reactor was continuously operated by applying an electric current and feeding acetate. In this reactor, copper ion removal and denitrification proceeded simultaneously and the pH value of the treated water was increased almost to neutral. The electric current that passed through the cathode contributed to the removal of the copper ion and the generation of hydrogen gas. The generated hydrogen gas as well as the added acetate was effectively utilized for denitrification. A theoretical evaluation of pH in the effluent suggested that the pH increase was mainly caused by the generation of hydroxyl ion during denitrification. In addition, the inorganic carbon species generated during denitrification with acetate and by the electrochemical oxidation of anodic carbon acted as a buffer to minimize a further increase of pH at higher nitrate removal efficiencies. These results demonstrated that copper ion removal, denitrification and neutralization could be achieved simultaneously by using a single bioelectrochemical reactor.     

Initial stages of electrodeposition of metal nanowires in nanoporous templates

This paper describes the initial stages of electrochemical growth of Cu and Ni nanowires in polycarbonate (PC) track-etched membranes as the template. The diameters of the wires ranged from 50 to 200 nm. A thin Pt-Pd layer (∼30 nm thick) was sputter-deposited onto one side of the membrane and used as the cathode. The layer was not thick enough to seal the pore mouths. Cathodic current in the early stages of both Cu and Ni electrodeposition abruptly decreased after a period proportional to the pore diameter. Growing Cu grains plugged the pore openings causing the current to decrease, while the Ni deposition initially yielded a hollow tube in each pore resulting in a nanostructure transition of the tube to the wire at the growth front and a decrease in the current.     

Lightning occurrence data observed with lightning location systems of electric power companies in Japan: 2009–2013

Nine electric power companies in Japan have been collecting lightning data with lightning location systems. Five years of the lightning data (2009–2013) are summarized and analyzed in this paper. The recent annual number of lightning flashes of which the current is more than 10 kA in Japan is around 1 million. The variations of lightning occurrence characteristics by areas, seasons, and so on, are clarified. Meteorological conditions that may affect lightning occurrence are also discussed. Furthermore, we show that there is a clear correlation between the number of lightning strikes and the outage rate of transmission lines. © 2016 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Changes in the amounts of water-soluble umami-related substances in porcine longissimus and biceps femoris muscles during moist heat cooking

Time course changes in amounts of glutamic acid, total free amino acid, inosine monophosphate (IMP), and 2%-trichloroacetic acid-soluble oligopeptides in whole, muscle only, and cooking juice during wet-heat cooking in pork longissimus and biceps femoris muscles were investigated because the movements of umami-relevant substances during cooking treatment had not previously been clarified in detail. The amounts of glutamic acid, total free amino acid, and IMP significantly (P<.05) decreased and increased in muscle and cooking juice during 180min of cooking, respectively. The whole amounts of glutamic acid and total free amino acid remained unchanged during cooking treatment. The whole amount of IMP, however, increased significantly at 10min of cooking (P<.05) and was maintained after the 10-min period. The extramuscular oligopeptides amount increased significantly in response to the cooking treatment (P<.05). The intramuscular amount of oligopeptides decreased at 30min of cooking but increased significantly (P<.05) after 60min. The whole meat oligopeptides amount increased significantly during a 180-min cooking treatment (P<.05). These results indicate that glutamate, total free amino acid, and IMP were released from the muscle during cooking, and that IMP levels increased in the initial phase of cooking. In addition, oligopeptides increased during wet-heat cooking of pork muscles.