The effect of additional albumin with optimal concentration on the reperfusion after preservation of isolated rat hearts

Glucagon has been demonstrated to stimulate the uptake of bile acid in isolated rat hepatocytes (Am. J. Physiol., 249, G427 (1985)). In the present study, we determined the influence of glucagon on the hepatic transport of a bile acid, taurocholate (TCA), in isolated rat livers. A single-pass perfusion and a rapid-injection, multiple indicator dilution method were employed. The hepatic availability at steady-state was 0.04. With the presence of glucagon in the perfusate (from 10(-9) to 10(-7) M), the bile flow rate was stimulated by 30%, while hepatic availability was decreased from 0.04 to 0.02 with a stepwise increase in glucagon concentration. Thirty min after the infusion of glucagon (300 nM), [3H]TCA and [14C]inulin were injected in a bolus state into the portal vein, and the outflow was collected at 1.0 s intervals over 30 s. Glucagon decreased the instantaneous hepatic availability by 50% compared to the control level, and was thus compatible with the steady-state experiments. In the control experiment, the influx clearance (PSinf) was 20 times higher than the efflux clearance (PSeff). Glucagon (300 nM) in the perfusate enhanced PSinf by 50% of the control, whereas sequestration clearance (CLseq) and the biliary excretion rate constant remained unchanged. PSeff was stimulated to 2 times the control, but still remained much smaller than CLseq. Based on the comparison of PSinf, PSeff and CLseq, the rate-determining process of TCA hepatic elimination was the influx process in both the presence and absence of glucagon. Taken together, the enhancement of the influx process was responsible for the decrease in TCA hepatic availability caused by glucagon.(ABSTRACT TRUNCATED AT 250 WORDS)     

The dynamics of daily events and well-being across cultures: When less is more.

The authors examined cultural and individual differences in the relation between daily events and daily satisfaction. In a preliminary study, they established cross-cultural equivalence of 50 daily events. In the main study, participants in the United States, Korea, and Japan completed daily surveys on the 50 events and daily satisfaction for 21 days. The multilevel random coefficient model analyses showed that (a) the within-person association between positive events and daily satisfaction was significantly stronger among Asian American, Korean, and Japanese participants than among European American participants and (b) the within-person association between positive events and daily satisfaction was significantly weaker among individuals high in global life satisfaction than among those low in global life satisfaction. The findings demonstrate a weaker effect of positive events on daily well-being among individuals and cultures high in global well-being. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Polymerization of 2-dibutylamino-1,3,5-triazine-4,6-dithiol on wire during friction process

2-Dibutylamino-1,3,5-triazine-4,6-dithiol (DB) and a mixture of DB and triallylisocyanurate (TAIC) were used as a lubricant during steel wire drawing due to a dry process. DB gave a polymer film with 180 nm in thickness to wire surfaces during the wire drawing. The polymer film had a disulfide structure on the backbone and contained a small amount of DB monomer and olygomer. Molecular weight and polymer weight increased with the drawing rate. The mixture of DB and TAIC gave mainly a three-dimensional polymer film with 225 nm in thickness to wire surfaces during drawing. The polymer film insoluble in THF had mono and disulfide structures and contained a small amount of linear polymer, DB, and TAIC. Such tribological polymerizations are estimated as follows: DB produces dithiyl radicals on a nascent surface formed during drawing and in the presence of oxygen and heat. The dithiyl radicals were polymerized by coupling with each other to give disulfide bonds or added to allyl groups in TAIC to give monosulfide bonds. It is concluded that this technique should be possible to use for unifying metal processing and surface treatment. © 1995 John Wiley & Sons, Inc.     

Influence of ammonium salt on electrowinning of copper from ammoniacal alkaline solutions

In order to develop an energy-saving copper recycling process from wastes, electrochemical measurements were conducted in ammoniacal alkaline solutions containing Cu(I) ions and an ammonium salt of sulfate, chloride or nitrate. The results of each system were then compared. The polarization measurements suggested that the voltage required for the electrode process is lower in the chloride and nitrate systems than that in the sulfate system. The cathode current efficiency during the copper electrodeposition varied from 39 to 97% and increased with current density in the chloride and sulfate systems. In the nitrate system, the lowest cathode current efficiency of 30% was observed because of nitrate ion reduction. Based on these results, the power consumption required for the electrowinning stage of the copper recycling process was calculated. Among these three systems, the chloride system showed the lowest power consumption of 500 kWh t⁻¹ at the current density of 200 A m⁻², which is about 25% of the conventional copper electrowinning process from a copper sulfate-sulfuric acid solution.     

Activity measurement of gallium in the B2 phase of the CoGa–Sb system by the EMF method with zirconia-based solid electrolyte

Gallium activity in the B2 phase regions of both binary Co–Ga and ternary Co–Ga–Sb systems was measured by EMF method with stabilized zirconia solid electrolyte The temperature range was 1073–1273 K and Sb concentrations were 1, 2 and 3 mol fractions. Ga activity at 1173 and 1273 K increases sharply in Ga rich region and the addition of Sb to the CoGa phase increases Ga activity. Activity change corresponds to the lattice parameter change with Sb addition to the CoGa phase.     

A coarse-to-fine IP-driven registration for pose estimation from single ultrasound image

A fast registration making use of implicit polynomial (IP) models is helpful for the real-time pose estimation from single clinical free-hand Ultrasound (US) image, because it is superior in the areas such as robustness against image noise, fast registration without enquiring correspondences, and fast IP coefficient transformation. However it might lead to the lack of accuracy or failure registration.In this paper, we present a novel registration method based on a coarse-to-fine IP representation. The approach starts from a high-speed and reliable registration with a coarse (of low degree) IP model and stops when the desired accuracy is achieved by a fine (of high degree) IP model. Over the previous IP-to-point based methods our contributions are: (i) keeping the efficiency without requiring pair-wised correspondences, (ii) enhancing the robustness, and (iii) improving the accuracy. The experimental result demonstrates the good performance of our registration method and its capabilities of overcoming the limitations of unconstrained freehand ultrasound data, resulting in fast, robust and accurate registration.     

Degradation characteristics of polylactide in thermophilic anaerobic digestion with hyperthermophilic solubilization condition

To test whether hyperthermophilic treatment promotes polylactide (PLA) dissolution and methane conversion under anaerobic digestion conditions, a single thermophilic control reactor (55 °C) and a two-phase system consisting of a hyperthermophilic reactor (80 °C) and a thermophilic reactor (55 °C) were continuously fed with a mixture of PLA and artificial kitchen garbage. In Runs 1 and 2, the PLA dissolution ratios in the two-phase system were 79.2 ± 6.5% and 85.2 ± 7.0%, respectively, higher than those of the control. Batch experimental results indicated that hyperthermophilic treatment could promote PLA dissolution to a greater degree as compared with single thermophilic treatment and that ammonia addition also had a promotional effect on PLA dissolution. In the two-phase system, after hyperthermophilic treatment, dissolved PLA was converted to methane gas under the subsequent thermophilic condition.     

Strength Analysis of Yttria-Stabilized Tetragonal Zirconia Polycrystals

Tensile strength of Y₂O₃-stabilized ZrO₂ polycrystals (Y-TZP) was measured by a newly developed tensile testing method with a rectangular bar. The tensile strength of Y-TZP was lower than that of the three-point bend strength, and the shape of the tensile strength distribution was quite different from that of the three-point bend strength distribution. It was difficult to predict the distribution curve of the tensile strength using the data of the three-point bend strength by one-modal Weibull distribution. The distribution of the tensile strength was analyzed by two- or three-model Weibull distribution coupled with an analysis of fracture origins. The distribution curve of the three-point bend strength which was estimated by multimodal Weibull distribution agreed favorably with that of the measured three-point bend strength values. A two-modal Weibull distribution function was formulated approximately from the distributions of the tensile and three-point bend strengths, and the estimated two-modal Weibull distribution function for the four-point bend strength agreed well with the measured four-point bend strength.     

Zr-Hf interdiffusion in polycrystalline Y2O3-(Zr+Hf)O2

Lattice and grain-boundary interdiffusion coefficients were calculated from the concentration distributions determined for Zr-Hf interdiffusion in polycrystalline 16Y₂O₃·84(Zr_1–x Hf _x )O₂ withx=0.020 and 0.100. The lattice interdiffusion coefficients were described byD=0.031 exp [–391 (kJ mol^–1)/RT] cm² sec^–1 and the grain-boundary diffusion parameters byD=1.5×10^–6exp [–309(kJ mol^–1)/RT] cm³ sec^–1 in the temperature range 1584–2116° C. Comparison of the results with those for the systems CaO-(Zr+Hf)O₂ and MgO-(Zr+Hf)O₂ indicated that the Zr self-diffusion coefficient was insensitive to the dopants in the fluorite-cubic ZrO₂ solid solutions.     

Fabrication of an Anode-Supported Gadolinium-Doped Ceria Solid Oxide Fuel Cell and Its Operation at 550°C

Ce_0.9Gd_0.1O_{2− x} (CGO) layers were deposited onto nonconductive porous NiO–CGO supports by electrophoretic infiltration, and then compacted by isostatic pressing to achieve a high packing density of the deposited layer. The bilayers were sintered to give dense CGO layers at 1290°C in air. A fuel cell comprising an La_0.6Sr_0.4Co_0.2Fe_0.8O_{3− x} cathode, a 10-μm CGO electrolyte, and a Ni–CGO anode was tested at 550°C with humidified 10% H₂ and air. The cell showed an open circuit voltage of 0.86 V and delivered a steady current of about 470 mA/cm² at a terminal voltage of 0.24 V.