Extraction of protein from skim natural rubber latex using PEG as a surfactant via low speed centrifugation and continuous flow

Protein extractions from skim natural rubber latex using 3 %w/v polyethylene glycol (PEG6000) via both low speed centrifugation and continuous flow were investigated. In centrifugal extraction, when the speed was 1000 rpm, the extractable protein (EP) content in serum increased with processing time from 5 to 30 min and when the time was fixed at 5 min, EP content increased with centrifugal speed. In addition, further washing deproteinized chips with 2 %w/v SDS solution could remove proteins with efficiencies corresponding to the efficiencies of protein removals in latex phase, implying the role of PEG in protein reduction in both steps. In continuous flow extraction, EP content increased with increasing Reynolds number or increasing mean residence time of the flow to a maximum and then dropped. The efficiencies of the centrifugal extraction and continuous flow extraction were 55.2 and 33.7%, respectively. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39900.     

Stable SOI micromachined electrostatic AC voltage reference

We have designed and manufactured a micromachined moving plate capacitor to be used as an AC voltage reference in electrical metrology. The reference is based on the characteristic AC current–voltage curve of the component having a maximum, the value of which ideally depends only on the geometry of the component and material properties of single crystalline silicon. The electrode surface stability is essential in this application and hence a new fabrication process has been developed to metallize both surfaces of an electrostatically actuated micromachined structure. The stability of the AC reference voltage at a frequency of 100 kHz and an RMS voltage value 6.4 V was measured to be ±60 ppm over 14 h.     

Environment Analysis as a Basis for Designing Multimodal and Multidevice User Interfaces

In this article, we present a practical approach to analyzing mobile usage environments. We propose a framework for analyzing the restrictions that characteristics of different environments pose on the user's capabilities. These restrictions along with current user interfaces form the cost of interaction in a certain environment. Our framework aims to illustrate that cost and what causes it. The framework presents a way to map features of the environment to the effects they cause on the resources of the user and in some cases on the mobile device. This information can be used for guiding the design of adaptive and/or multimodal user interfaces or devices optimized for certain usage environments. An example of using the framework is presented along with some major findings and three examples of applying them in user interface design.     

Optimal proportion of studded tyres in traffic flow to prevent polishing of an icy road

Studded tyres can significantly wear the road surface and increase particle emissions from the road surface, which has a negative impact on air quality in urban areas. However, road wear might have a positive aspect by roughening the road surface and thus preventing polishing. As a consequence, other vehicles than the ones using studded tyres might also benefit from the usage of studded tyres. The impact of the proportion of studded tyres in the traffic flow on the tyre–ice friction coefficient was studied with a fleet of real cars in a closed environment under strict procedural control. The results show that a proportion of 25–50% studded tyres in the traffic flow is enough to prevent ice from developing in a manner that is critically slippery for non-studded winter tyres. It was also observed that the visual appearance of the ice surface does not indicate if the ice has become more slippery or not.     

PCR assay for differentiating between Group I (proteolytic) and Group II (nonproteolytic) strains of Clostridium botulinum

Groups I (proteolytic) and II (nonproteolytic) C. botulinum are genetically and physiologically distinct groups of organisms, with both groups being involved with human botulism. Due to differences in spore heat resistance and growth characteristics, the two groups possess different types of human health risks through foods, drink, and the environment. The epidemiology of human botulism due to Groups I and II C. botulinum is poorly understood, largely due to insufficient characterization of disease isolates, and warrants thorough outbreak investigation with a particular attention to discrimination between the different physiological groups of C. botulinum. In this study, a PCR assay was developed to discriminate between Group I and Group II C. botulinum. The assay is based on the fldB associated with phenylalanine metabolism in proteolytic clostridia, and employs an internal amplification control targeted to conservative regions of 16S rrn in Groups I and II C. botulinum. The assay correctly identified all 36 Group I and 24 Group II C. botulinum strains, possessing a 100% exclusivity and inclusivity. The assay provides a substantial improvement in discriminating between the Groups I and II C. botulinum, which traditionally is based on a time-consuming and error-prone culture method. Differentiation between the physiological groups of C. botulinum is an essential step in investigation of human botulism outbreaks, and should be considered as a diagnostic corner-stone in order to improve our epidemiological understanding of human botulism.     

Process cycle optimization in press forming of paperboard

Three‐dimensional forming of paperboard is commonly done by a press forming process, which has been widely researched. However, the process cycle of the press forming of paperboard trays has not yet been completely optimized due to limited adjustability and unsophisticated mechanical structure of commonly used forming equipment. The object of this study is to optimize the force curve of stroke to improve product quality without compromising the production rate using LUT Adjustable Packaging Line prototype for practical evaluation of formability and multibody dynamics software MSC Adams for simulation. Several process parameters were investigated with different process cycles to study their effect on the quality of the formed products. With optimized male mould speed, acceleration and speed of the blank could be reduced, which led to significantly reduced rupturing tendency without compromising the production speed. It was also found that a constant blank holding force should be used to achieve acceptable tray quality, although this results in a significantly increased surface pressure applied to the formed substrate. It was also discovered that a novel male mould attachment, which included a pressing force adjustment system that utilized a spring set with an adjustable preload, made it possible to control the force distribution between different forming tools during the dwelling phase of the process cycle in an improved way. Utilization of the method used in this paper leads to a better tray quality without compromising the production efficiency. Furthermore, this can increase the number of possible package applications for sustainable materials, such as paperboard.     

Electrical conductivity and mechanical properties of polyaniline/natural rubber composite fibers

Electrically conducting elastomer fibers based on natural rubber (NR) and up to 10% w/w polyaniline (PANI) in its emeraldine base (EB) form were fabricated by a wet spinning process. The resulting fibers at various PANI contents were doped by immersion in aqueous HCl solution, which converted the PANI to the electrically conductive emeraldine salt (ES) form. The morphology of the composite fibers was studied by scanning electron microscopy (SEM). PANI particles were inhomogeneously distributed in the NR matrix. The electrical conductivity of the fibers increased with the increasing PANI‐ES content and leveled off at a value of around 10^?3 S/cm at PANI‐ES concentration of 5% w/w. The fibers retained most of their elasticity upon doping, while the tenacity was somewhat reduced. Gratifyingly, the electrical conductivity of the new elastomer fibers was preserved upon elongational deformation, even if strains as large as 600% were applied. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Comparison of flexibility options to improve the value of variable power generation

As the share of variable generation in power systems increases, there is increasing value in more flexible use and generation of electricity. The paper compares the economic value of several flexibility options in a large power system with a large amount of reservoir hydro power. Generation planning models are needed to consider the impact of flexibility options on other investments in a power system. However, generation planning models do not include all the relevant operational details. The approach in the paper combines a generation planning model with a unit commitment and dispatch model. The results demonstrate the value of coupling the heat and power sectors and the value of transmission. Low-cost electricity storage does not appear to be as decisive in the Northern European context with wind power as the main variable generation source. The paper also addresses methodological issues related to the inclusion of operational constraints in generation planning.