Opportunistic Routing Protocol Based EPO–BES in MANET for Optimal Path Selection

Wireless Personal Communications - Despite its various benefits, the Mobile Ad-hoc Network (MANET) has a number of obstacles due to its mobility, unstable topology, energy efficiency, and other...     

Genetic based sensorless hybrid intelligent controller for strip loop formation control between inter-stands in hot steel rolling mills

Safe operating environment is essential for all complex industrial processes. The safety issues in steel rolling mill when the hot strip passes through consecutive mill stands have been considered in this paper. Formation of sag in strip is a common problem in the rolling process. The excessive sag can lead to scrap runs and damage to machinery. Conventional controllers for mill actuation system are based on a rolling model. The factors like rise in temperature, aging, wear and tear are not taken into account while designing a conventional controller. Therefore, the conventional controller cannot yield a requisite controlled output. In this paper, a new Genetic-neuro-fuzzy hybrid controller without tension sensor has been proposed to optimize the quantum of excessive sag and reduce it. The performance of the proposed controller has been compared with the performance of fuzzy logic controller, Neuro-fuzzy controller and conventional controller with the help of data collected from the plant. The simulation results depict that the proposed controller has superior performance than the other controllers.     

Bacteria-Responsive Self-Assembly of Antimicrobial Peptide Nanonets for Trap-and-Kill of Antibiotic-Resistant Strains

Bacterial trapping using nanonets is a ubiquitous immune defense mechanism against infectious microbes. These nanonets can entrap microbial cells, effectively arresting their dissemination and rendering them more vulnerable to locally secreted microbicides. Inspired by this evolutionarily conserved anti-infective strategy, a series of 15 to 16 residue-long synthetic β-hairpin peptides is herein constructed with the ability to self-assemble into nanonets in response to the presence of bacteria, enabling spatiotemporal control over microbial killing. Using amyloid-specific K114 assay and confocal microscopy, the membrane components lipoteichoic acid and lipopolysaccharide are shown to play a major role in determining the amyloid-nucleating capacity as triggered by Gram-positive and Gram-negative bacteria respectively. These nanonets displayed both trapping and killing functionalities, hence offering a direct improvement from the trap-only biomimetics in literature. By substituting a single turn residue of the non-amyloidogenic BTT1 peptide, the nanonet-forming BTT1-3A analog is produced with comparable antimicrobial potency. With the same sequence manipulation approach, BTT2-4A analog modified from BTT2 peptide showed improved antimicrobial potency against colistin-resistant clinical isolates. The peptide nanonets also demonstrated robust stability against proteolytic degradation, and promising in vivo efficacy and biosafety profile. Overall, these bacteria-responsive peptide nanonets are promising clinical anti-infective alternatives for circumventing antibiotic resistance.     

Organometallic L-Alanine Cadmium Iodide Crystals for Optical Device Fabrication

Single crystals of L-alanine cadmium iodide (LACI) were grown by the slow evaporation technique at room temperature. A single-crystal X-ray diffraction (SXRD) model was used to evaluate the crystal structure of the as-grown LACI crystal. The energy dispersive X-ray (EDX) analysis and ultraviolet-visible-near infrared (UV-vis-NIR) transmittance studies were carried out, and the results reveal the presence of elements in the title compound. From the transmittance data, the optical bandgap as a function of photon energy was estimated, and the different optical constants were calculated. A fluorescence study was performed for the LACI crystal. Thermogravimetric and differential thermal analyses have also been studied to investigate the thermal property of the LACI crystal. The efficiency of the second harmonic generation (SHG) of the title crystal was investigated. The magnetic and electrical properties were estimated by the vibrating sample magnetometer (VSM) analysis and impedance study, respectively.     

Efficacy of biogenic silver nanoparticles against clinical isolates of fungi causing mycotic keratitis in humans

Mycotic keratitis is mainly responsible for vision loss caused by various fungi. Sometimes, proper treatment of such infection is not possible due to unavailability of effective antifungal agents and development of resistance of such fungi to antimycotic drugs. Hence, it is necessary to search for potential antifungal agents, which can effectively eradicate fungal infection of eyes. Nanoparticles‐based antifungal drugs overcome this problem by increasing permeability and properties of drug molecules. In the present study, silver nanoparticles were synthesised by using Helminthosporium sp. and Chaetomium sp. following sequential reduction technique. The synthesised silver nanoparticles were detected primarily by UV‐visible spectrophotometer showing absorption spectra at 424 and 433 nm, respectively. Nanoparticles tracking analysis confirmed the mean particle size of silver nanoparticles as 45 and 55 nm. The synthesised AgNPs showed significant antifungal activity against fungi causing mycotic keratitis, when used alone and in combination with ketoconazole and amphotericin B in the range of 30–70 microgram per millilitre of minimum inhibitory concentration. Thus, the synthesised AgNPs can be used to enhance the activities of ketoconazole and amphotericin B.Inspec keywords: silver, nanoparticles, nanomedicine, antibacterial activity, diseases, permeability, ultraviolet spectra, visible spectra, particle sizeOther keywords: biogenic silver nanoparticles, fungi, mycotitic keratitis, vision loss, infection, antifungal agents, antimycotic drugs, antifungal drugs, permeability, Helminthosporium sp, Chaetomium sp, sequential reduction technique, UV‐visible spectrophotometer, mean particle size, ketoconazole, amphotericin B, wavelength 424 nm, wavelength 433 nm, size 45 nm, size 55 nm, Ag     

Multiwalled carbon nanotubes grafted chitosan nanobiocomposite: A prosperous functional nanomaterials for glucose biosensor application

Multiwalled carbon nanotubes (MWNTs) grafted chitosan (CS) nanowire (NW) was prepared by phase separation method. Glucose oxidase (GOx) was sequentially immobilized into MWNT-CS-NW to obtain MWNT-CS-NW/GOx biosensor. Field emission scanning electron microscopy (FESEM) images of MWNT-CS-NW/GOx reveals the existence of MWNT and CS. Cyclic voltammetry and amperometry were used to evaluate the electrochemical determination of glucose. The MWNT-CS-NW/GOx biosensor shows an excellent performance for glucose at +0.34 V with a high sensitivity (5.03 μA/mM) and lower response time (3 s) in a wide concentration range of 1-10 mM (correlation coefficient of 0.9988). In addition, MWNT-CS-NW/GOx biosensor possesses better reproducibility, storage stability and there is negligible interference from other electroactive components.     

Plasma spheroidization of nickel powders in a plasma reactor

Thermal spray coatings of surfaces with metal, alloy and ceramic materials for protection against corrosion, erosion and wear is an intense field of research. The technique involves injection of the powder into a plasma flame, melting, acceleration of the powder particles, impact and bonding with the substrate. Feedstock powders of metals, alloys and ceramics for thermal spray applications have to meet several requirements. Particle shape, size and its distribution, powder flow characteristics and density are the important factors to be considered in order to ensure high spray efficiency and better coating properties. For smooth and uniform feeding of powders into plasma jet, the powder particles have to be spherical in shape. High temperatures and steep temperatures present in thermal plasma is exploited to spheroidize particles in the present investigation. Nickel powder particles in the size range from 40–100 μm were spheroidized using plasma processing. SEM and optical micrographs showed spherical shape of processed particles.     

Electrospun MgO/Nylon 6 Hybrid Nanofibers for Protective Clothing

Nano-Micro Letters - Magnesia (MgO) nanoparticles were produced from magnesite ore (MgCO3) using ball mill. The crystalline size, morphology and specific SSA were characterized by X-ray diffraction...