Analysis of stepwise charging limits and its implementation for efficiency improvement in switched capacitor DC–DC converters

In this work we analysed the stepwise charging technique to find the limits from which it is beneficial in terms of load capacitance and charge–discharge frequency. We included in the analysis practical limitations such as the consumption of auxiliary logic needed to implement the technique and the minimum size of auxiliary switches imposed by the technology. We proposed an ultra-low-power logic block to push these limits and to obtain benefits from this technique in small capacitances. Finally, we proposed to use a stepwise driver in the driving of the gate capacitance of power switches in switched-capacitor (SC) DC–DC converters. We designed and manufactured, in a 130 nm process, a SC DC–DC converter and measured a 29% energy reduction in the gate-drive losses of the converter. This accounts for an improvement of 4% (from 69 to 73%) in the overall converter efficiency.

     

Visceral Obesity and Its Shared Role in Cancer and Cardiovascular Disease: A Scoping Review of the Pathophysiology and Pharmacological Treatments

The association between obesity, cancer and cardiovascular disease (CVD) has been demonstrated in animal and epidemiological studies. However, the specific role of visceral obesity on cancer and CVD remains unclear. Visceral adipose tissue (VAT) is a complex and metabolically active tissue, that can produce different adipokines and hormones, responsible for endocrine-metabolic comorbidities. This review explores the potential mechanisms related to VAT that may also be involved in cancer and CVD. In addition, we discuss the shared pharmacological treatments which may reduce the risk of both diseases. This review highlights that chronic inflammation, molecular aspects, metabolic syndrome, secretion of hormones and adiponectin associated to VAT may have synergistic effects and should be further studied in relation to cancer and CVD. Reductions in abdominal and visceral adiposity improve insulin sensitivity, lipid profile and cytokines, which consequently reduce the risk of CVD and some cancers. Several medications have shown to reduce visceral and/or subcutaneous fat. Further research is needed to investigate the pathophysiological mechanisms by which visceral obesity may cause both cancer and CVD. The role of visceral fat in cancer and CVD is an important area to advance. Public health policies to increase public awareness about VAT’s role and ways to manage or prevent it are needed.     

Induction of Fos immunoreactivity in the brain by exposure to the elevated plus-maze

The log-rank test is commonly used to assess therapeutic effect in prospective, randomised clinical trials. This test is sensitive to differences in survival between treatment groups at a specific endpoint, but cannot determine whether such a difference is due to an enhanced cure rate or an enhanced survival time among uncured patients. To investigate the clinical impact of such limitations, an algorithm was constructed to simulate clinical, randomised, adjuvant therapy trials in patients with a cured fraction of 0.27 and a median survival time for uncured patients of 3.4 years. Hypothetical therapies were introduced to increase rate of cure, increase median survival time, or achieve a combination of these effects. For 500 simulated patients recruited over a 5 year period and then followed for three additional years, a 50% enhancement of median survival time (to 5.1 years) led to a survival increase detectable at the P = 0.05 level in 780 of 1000 trials, whereas a 50% enhancement of cured fraction (to 40.5%) led to a detectable increase at the same level in only 449 of 1000 trials. These findings suggest that, in clinical trials of adjuvant therapy for stage 2 breast cancer, the log rank test may be more sensitive to increases in tumour-related survival time than to increases in cured fraction.     

All-Optical Vestigial Sideband Generation Using a Semiconductor Optical Amplifier

An all-optical setup to generate vestigial sideband signals based on self-phase modulation in a semiconductor optical amplifier is experimentally demonstrated at 10 Gb/s. Sideband suppressions higher than 15 dB are reported with improved eye opening. Wavelength-independent operation over 26 nm is demonstrated. Increased chromatic dispersion tolerance is verified: a receiver sensitivity penalty of 5.3 dB, relative to back-to-back, is obtained after transmission over 2720 ps/nm; whereas conventional double sideband is penalized by 4.0 dB after 1360 ps/nm     

Generating compact, guaranteed passive reduced-order models of 3-D RLC interconnects

As very large scale integration (VLSI) circuit speeds and density continue to increase, the need to accurately model the effects of three-dimensional (3-D) interconnects has become essential for reliable chip and system design and verification. Since such models are commonly used inside standard circuit simulators for time or frequency domain computations, it is imperative that they be kept compact without compromising accuracy, and also retain relevant physical properties of the original system, such as passivity. In this paper, we describe an approach to generate accurate, compact, and guaranteed passive models of RLC interconnects and packaging structures. The procedure is based on a partial element equivalent circuit (PEEC)-like approach to modeling the impedance of interconnect structures accounting for both the charge accumulation on the surface of conductors and the current traveling in their interior. The resulting formulation, based on nodal or mixed nodal and mesh analysis, enables the application of existing model order reduction techniques. Compactness and passivity of the model are then ensured with a two-step reduction procedure where Krylov-subspace moment-matching methods are followed by a recently proposed, nearly optimal, passive truncated balanced realization-like algorithm. The proposed approach was used for extracting passive models for several industrial examples, whose accuracy was validated both in the frequency domain as well as against measured time-domain data.     

Simple approach for the plasma treatment of polymeric membranes and investigation of the aging effect

The modification of the surface characteristics after treatment with plasma in polymeric materials, such as the aging phenomenon, calls the attention of research in the area of nonthermal plasma technology. In this work, a direct treatment with dielectric-barrier discharge plasma was used on the surfaces of ultrafiltration membranes. The measurements of the contact angle with water, attenuated total reflectance accessory, zeta potential, atomic force microscopy and scanning electron microscopy-MEV were performed on the surfaces to verify changes after plasma treatment and to understand the occurrence and timing of the plasma aging effect. In the analysis of the membrane performance, hydraulic permeation and protein retention tests were performed. The results showed an improvement in wettability and hydrophilic properties in the post-treated membranes. The study of reversibility/aging of the post-plasma surface is important for research that deals with the modification of polymeric membranes. Changes in surface morphology, topography and wettability of the membranes were observed up to seven days after treatment, with a tendency to return to the initial characteristics of the membranes.     

Aramid pulp treated with imidazolium ionic liquids as a filler in rigid polyurethane bio-foams

This article reports an aramid pulp (AP) treated with two ionic liquids (IL), namely 1-n-butyl-3-methylimidazolium chloride (C₄.Cl) and 1-carboxymethyl-3-methylimidazolium chloride (HO₂C), and its use as a filler in reinforced rigid polyurethane foams (RPUF). The RPUF were incorporated with the treated AP at three weight fractions (c.a. 0.1, 0.5, and 1.0 wt%) and were produced by the free rising method. The results showed that the studied IL promoted a better interaction between the AP and the RPUF system, which increased the overall reactivity, imparting a higher cell anisotropy. This also yielded a positive effect in mechanical properties and thermal stability of the RPUF. Compared to the neat RPUF, outstanding increases of approximately 50 and 20% were achieved in compressive modulus and strength, respectively. In all, the use of IL promoted increased compatibility between matrix and reinforcement, especially that HO₂C IL.     

A systematic mapping study of software product lines testing

Context

In software development, Testing is an important mechanism both to identify defects and assure that completed products work as specified. This is a common practice in single-system development, and continues to hold in Software Product Lines (SPL). Even though extensive research has been done in the SPL Testing field, it is necessary to assess the current state of research and practice, in order to provide practitioners with evidence that enable fostering its further development.

Objective

This paper focuses on Testing in SPL and has the following goals: investigate state-of-the-art testing practices, synthesize available evidence, and identify gaps between required techniques and existing approaches, available in the literature.

Method

A systematic mapping study was conducted with a set of nine research questions, in which 120 studies, dated from 1993 to 2009, were evaluated.

Results

Although several aspects regarding testing have been covered by single-system development approaches, many cannot be directly applied in the SPL context due to specific issues. In addition, particular aspects regarding SPL are not covered by the existing SPL approaches, and when the aspects are covered, the literature just gives brief overviews. This scenario indicates that additional investigation, empirical and practical, should be performed.

Conclusion

The results can help to understand the needs in SPL Testing, by identifying points that still require additional investigation, since important aspects regarding particular points of software product lines have not been addressed yet.     

DISCRETE WAVELET TRANSFORM FOR DENOISING RAMAN SPECTRA OF HUMAN SKIN TISSUES USED IN A DISCRIMINANT DIAGNOSTIC ALGORITHM

In this work, we applied the discrete wavelet transform (DWT) method as a denoising tool for dispersive Raman spectra of skin samples, and we compared the results obtained with the low-order polynomial fitting in a discriminating model based on principal components analysis (PCA). We used a set of 50 Raman spectra of skin tissue fragments diagnosed as normal (N) (25 spectra) and basocellular cell carcinoma (BCC) (25 spectra). A denoising procedure using DWT and its inverse was employed, and the resulting spectra were compared to denoising using low-order polynomial fitting and adjacent averaging smoothing. The tissue spectral profile showed changes in the intensity of bands below 1400 cm^?1 for DWT compared to the denoising by polynomial and smoothing. By applying PCA and Mahalanobis distance in both groups processed, we verified that the filtering method does not alter significantly the discrimination of N and BCC tissues. However, the DWT denoising presented an interesting result, which showed the main components after decomposition of the Raman signal used in the reconstruction.