Water permeation and corrosion resistance of single- and two-component hydrophobic polysiloxane barrier coatings

The degradation of corrosion preventative coatings contributes to the high cost and time requirements for maintaining structures in harsh environments. However, the development of new hydrophobic coatings holds the promise of extending the usable life of structures in marine environments. In this work, we quantify the barrier properties and corrosion resistance of two novel highly hydrophobic polysiloxane formulations and the legacy silicone alkyd topcoat used on the topside of Navy’s ships, all with haze gray pigmentation. Based on FTIR-ATR and EIS measurements of the pristine coatings, both the single- (1K) and the two-component (2K) polysiloxane provide significantly improved barrier characteristics (lower water diffusion coefficient and capacitance) than the silicone alkyd. These results were confirmed through a 3-month-long immersion corrosion test, which also showed that the 1K and 2K polysiloxane coatings had comparable degradation characteristic and remained highly hydrophobic.     

Damage characterization and modeling of a 7075-T651 aluminum plate

In this paper, the damage-induced anisotropy arising from material microstructure heterogeneities at two different length scales was characterized and modeled for a wrought aluminum alloy. Experiments were performed on a 7075-T651 aluminum alloy plate using sub-standard tensile specimens in three different orientations with respect to the rolling direction. Scanning electron microscopy was employed to characterize the stereology of the final damage state in terms of cracked and or debonded particles. A physically motivated internal state variable continuum model was used to predict fracture by incorporating material microstructural features. The continuum model showed good comparisons to the experimental data by capturing the damage-induced anisotropic material response. Estimations of the mechanical stress–strain response, material damage histories, and final failure were numerically calculated and experimentally validated thus demonstrating that the final failure state was strongly dependent on the constituent particle morphology.     

Adsorption and penetration of hydrogen in W: A first principles study

In BCC crystals, such as Tungsten (W), slippage has been observed on the (1 1 0) and (1 1 2) planes. In this work, hydrogen diffusion paths from three different W surfaces ((1 0 0), (1 1 0) and (1 1 2)) have been calculated using first principles density functional theory. Equilibrium sites for H at the surfaces are identified. The energetics for H penetration from the surfaces to the solute site in the bulk is calculated. It is found that for our low surface coverage of H (3.4 × 10¹⁴ H/cm²), approximately 2 eV is required for an H atom to penetrate any of the W surfaces considered in this study.     

Effect of isomerization on thermal behaviour of bisitaconimides

The effect of isomerization of N,N′‐bisitaconimido‐4,4′‐diphenyl ether to the corresponding biscitraconimide on the curing characteristics and thermal stability of cured resins is described. Resins having bisitaconimide:biscitraconimide ratios of 23:77–93:7 were prepared by reacting 4,4′‐diaminodiphenyl ether with itaconic anhydride in solvents of different polarities and under different reaction conditions. Resins containing a higher proportion of citraconimide had a lower melting point (191 vs 208 °C). The curing exotherm was observed immediately after melting in all the resins and exothermic peak temperature reduced with increase in citraconimide content. Resins having a higher proportion of citraconimide on isothermal curing (200 °C, 2 h) and subsequent heating in nitrogen atmosphere degraded at a slightly lower temperature. However, the char yield at 800 °C did not show any systematic dependence on citraconimide content. © 2002 Society of Chemical Industry     

Enhanced Fresnel zone plate coded microscopy of large-size objects

A scheme for microscopy of relatively large-size objects by using Fresnel zone plate (FZP) coded imaging (FZ-PCI) is digitally demonstrated. The limit on the source size in zone-plate-based microscopy comes from interference of out-of-focus multidiffraction orders of the FZP with the focused-order image. From the study of the angular spectrum of the coded image, it is shown that noise contribution from higher orders to a lower-order image can be digitally suppressed by selective propagation of spatial frequencies. Similarly, noise from aliasing and noise from lower orders to a higher-order image can be reduced by spatially limiting the coded image. To my knowledge for the first time, the results of digitally performed FZPCI-based microscopy of an object that is three times larger than the first zone of the FZP with a resolution better than 2 microm are presented and discussed.     

IR laser transtion in a nickel hollow cathode discharge

Laser oscillation in the infrared has been achieved in a nickel hollow cathode discharge. The 1.3968 µ laser transition is as-signed to Ni I.     

Intercalibration of SUMER and CDS on SOHO. III. SUMER and CDS-GIS. Solar and Heliospheric Observatory

Simultaneous observation of the same solar sources with different instruments is one way to test prelaunch radiometric calibrations and to detect changes in responsivity with time of extreme-ultraviolet instruments in space. Here we present the results of intercalibration of the SUMER (Solar Ultraviolet Measurements of Emitted Radiation) spectrometer (detectors A and B) and the GIS (Grazing Incidence Spectrometer), one of two spectrometers that compose the CDS (Coronal Diagnostic Spectrometer) on the Solar and Heliospheric Observatory (SOHO). The two instruments observed simultaneously radiances of emission lines at or near the center of the solar disk. The emission line chosen for intercomparison was Ne VIII at 770 A. However, such an intercomparison of the SUMER and CDS-GIS measurements means comparing two data sets with large differences in resolution and field of view. The latter difference, especially, introduces differences in the measured intensities caused by the solar variability that is relatively strong in the 770-A line. Using a statistical approach to overcome this problem, we found that the ratio of the GIS to the SUMER average radiances amounted to 2.6 +/- 0.9 before the SOHO's loss of attitude and to 2.1 +/- 0.7 afterward. These findings confirm earlier estimates of the GIS's responsivity being too low, and an update of the GIS calibration is recommended. Despite the large differences in resolution and field of view of the two instruments, the shapes of their normalized and rescaled histograms of the radiances agree well and therefore represent characteristic features of the Ne VIII line.