A process-dependent real-time controller for sequencing batch reactor plants: results of full-scale operation.

This paper presents results of a research project, in which a process-dependent real-time control (RTC) strategy for a sequencing batch reactor plant was realised in full-scale. The cycle controller is based on NH4 analysers, NO3 probes, TSS probes and sludge level probes. With this new RTC strategy it was possible to increase the treatment capacity by 50%. By implementation of the new controller the TN, TP and NH4-N treatment efficiency could be improved significantly, too. The treatment efficiency concerning COD is comparable.     

Data compression in multimedia computing — standards and systems

Note. There are several ways to order the mentioned Standards of ISO. In the US, for example, one may call ANSI (212-642-4900) or Global Engineering Documents, Washington, DC (800-854-7179)     

An intelligent visualisation and decision support system for decentralised wastewater treatment plants.

Current sanitation concepts of decentralised wastewater treatment and reuse raise the issue of monitoring and maintenance of such systems. To guarantee high quality of the recycled water, systems with high requirements concerning process technology are essential. With increasing numbers of decentralised treatment systems spread over far distances it will become more and more impossible and uneconomic to have expert personnel on site. Therefore, new visualisation and intelligent information systems are necessary. The paper describes the structure and 3D-demonstrations as a base for information visualisation. Up-to-date visualisation techniques, facilitating the cognition of context-adapted information, make it possible to maximise the amount of information presented to the user without overwhelming her or him. Concerning diagnosis and decision support systems in the domain of wastewater treatment, several interesting approaches are presented, estimating their applicability for decentralised wastewater treatment systems. The intelligent decision support system presented here consists of a combined ontology- and case-based reasoning system in addition to a process monitoring system. It is responsible for plausibility checks, error diagnosis, solution proposals, and optimisation suggestions.     

The xenoestrogen bisphenol A induces growth, differentiation, and c-fos gene expression in the female reproductive tract

The xenoestrogen bisphenol A (BPA) has been shown to mimic estrogen both in vivo and in vitro. BPA stimulates PRL secretion and the expression of a PRL regulating factor from the posterior pituitary in the estrogen-sensitive Fischer 344 rat (F344), but not in Sprague-Dawley (SD) rats. The goal of the present studies was to examine the in vivo actions of BPA on the reproductive tract. The specific objectives were 1) to characterize the short term effects of BPA on cell proliferation and c-fos expression in the uterus and vagina, and 2) to compare the effects of prolonged exposure to low doses of BPA on the reproductive tract of F344 and SD rats. Treatment with single high doses of BPA induced cell proliferation in the uterus and vagina of ovariectomized F344 rats, as determined by bromodeoxyuridine immunostaining. This proliferation was dose dependent (from 37.5-150 mg/kg) and followed a time course similar to that of estradiol (E2). Quantitative RT-PCR revealed that both BPA and E2 increased c-fos messenger RNA levels in the uterus 14- to 16-fold within 2 h, which returned to basal levels after 6 h. In the vagina, BPA-induced c-fos expression remained elevated for up to 6 h, compared with the transient increase caused by E2. Treatment of F344 rats for 3 days with continuous release capsules that supplied a much lower dose of BPA (approximately 0.3 mg/kg x day) resulted in hypertrophy, hyperplasia, and mucus secretion in the uterus and hyperplasia and cornification of the vaginal epithelium. The reproductive tract of SD rats did not respond to this treatment paradigm with BPA. These studies demonstrate that 1) the molecular and morphological alterations induced by BPA in the uterus and vagina are nearly identical to those induced by estradiol; 2) the vagina appears to be especially sensitive to the estrogenic actions of BPA; 3) the reproductive tract of the inbred F344 rat appears more sensitive to BPA than that of the outbred SD rat; and 4) continuous exposure to microgram levels of BPA is sufficient for exerting estrogenic actions.     

Isothermal section at 1673 K of the Mo–Ru–Si diagram and crystallographic structures of ternary phases

Efforts to improve the high temperature behavior of MoSi₂ in oxidizing environments led to the investigation of the Mo–Ru–Si phase diagram. The isothermal section at 1673 K was determined by X-ray diffraction, optical and scanning electron microscopies and EPMA. Five new silicides were identified and their crystallographic structure was characterized using conventional and synchrotron X-ray as well as neutron powder diffraction. Mo₁₅Ru₃₅Si₅₀, denoted α-phase, is of FeSi-type structure, space group P2₁3, a=4.7535 (5) Å, D_x=7.90 g. cm⁻³, Bragg R=7.13. Mo₆₀Ru₃₀Si₁₀ is the ordered extension of the Mo₇₀Ru₃₀ σ-phase with space group P4₂/mnm, a=9.45940(8) Å, c=4.94273(5) Å, D_x=6.14 g. cm⁻³, Bragg R=5.75.     

Simulations, models, and testbeds: A mutual catalysis

Recent developments in the area of decentralized and infrastructureless systems opened avenues for novel applications. Along with these new technologies, new questions regarding their operational bounds in terms of e.g. scalability and security arose. Due to the sparse presence of real-world decentralized and infrastructureless systems, new protocols and applications have to be scrutinized by means of simulation, in (small-scale) testbeds, and by analytical models. In this paper, we discuss challenges of evaluating security mechanisms for mobile ad hoc networks and peer-to-peer systems. We focus on harmonizing predictions of analytical models and results obtained from simulation studies and testbed experiments.     

Effect of pH control strategies and substrate concentration on the hydrogen yield from fermentative hydrogen production in large laboratory-scale

A series of batch experiments investigating two different pH control strategies, initial pH adjustment and continuous pH control, have been carried out in large laboratory-scale reactors with working volumes of 30 L. In both cases, pH was varied between 5 and 7.5. Sucrose concentrations were also varied starting from 0 up to 30 g/L. Higher hydrogen production yields can be achieved by batch experiments through continuous pH control than by simple initial pH adjustment. In the case of continuous pH control, maximization of hydrogen yield was acquired for slightly acidic pH of 6.5. Continuous pH control in the neutral pH range of 7.0 and in pH lower than 6.5, induced a reduction in the hydrogen production yield. Sucrose can be completely degraded only for a pH higher than 6. Lower pH values seem to inhibit the hydrogen-producing bacteria. Under the conditions of continuous pH adjustment at pH 6.5 and a sucrose concentration of 25 g/L the maximum hydrogen yield of 1.79 mol H(2)/mol hexose was obtained. These conditions could be applied for the batch start-up of large fermentors.     

Determination of trace isoflavone phytoestrogens in biological materials by capillary electrochromatography

Capillary electrochromatography using a specialty monolithic matrix was utilized in developing a rapid and highly efficient separation of isoflavones in biological materials. Without a preconcentration technique, it is relatively easy to reach ppm-ppb concentrations of these compounds in soy-based foods and verify them structurally using a photodiode array detector. With on-column preconcentration, we were able to measure low-ppb levels in human serum. Using blood samples from human volunteers, whose diet was supplemented by a soy-based product, the method has been validated for high-throughput screening of isoflavones in clinical studies.