Laws of Formation of Electrospark Coatings from Alloys of the Ni – Cr – Al – Y System

The main parameters of electrospark alloying of steel 45 with anodes made from Ni – Cr – Al – Y alloys have been investigated. The anodes were fabricated by casting and hot pressing. The highest values of the mass transfer coefficient were observed in the case of electrospark alloying with hot-pressed alloys. Microstructure and x-ray phase analyses of electrospark coatings revealed the presence of solid solutions based on nickel, iron, chromium as well as intermetallic compounds. Coatings obtained by electrospark alloying with hot-pressed alloy are more wear-resistant than are coatings obtained by alloying with cast alloys.     

In vivo purging with high-dose cytarabine followed by high-dose chemoradiotherapy and reinfusion of unpurged bone marrow for adult acute myelogenous leukemia in first complete remission

PURPOSE: To evaluate in a prospective study the efficacy of autologous bone marrow transplantation (BMT) in adult patients with acute myelogenous leukemia (AML) in first remission, using a single course of high-dose Cytarabine (HD Ara-C) consolidation therapy as in vivo purging. PATIENTS AND METHODS: Sixty consecutive adult patients with AML in first complete remission (CR) were treated with HD Ara-C consolidation therapy as a method of in vivo purging before marrow collection. High-dose therapy consisted of fractionated total-body irradiation (FTBI) 12 Gy, intravenous etoposide 60 mg/kg, and cyclophosphamide 75 mg/kg, followed by reinfusion of cryopreserved marrow. RESULTS: Sixty patients underwent consolidation treatment with HD Ara-C with the intent to treat with autologous BMT. Sixteen patients were unable to proceed to autologous BMT (10 patients relapsed, one died of sepsis, one developed cerebellar toxicity, two had inadequate blood counts, and two refused). Forty-four patients underwent autologous BMT and have a median follow-up time of 37 months (range, 14.7 to 68.7) for patients who are alive with no relapse. The cumulative probability of disease-free survival (DFS) at 24 months in the intent-to-treat group is 49% (95% confidence interval [CI], 37% to 62%) and in those who actually underwent autologous BMT is 61% (95% CI, 46% to 74%). The probability of relapse was 44% (95% CI, 31% to 58%) and 33% (95% CI, 20% to 49%) for the intent-to-treat and autologous BMT patients, respectively. CONCLUSION: This approach offers a relatively high DFS rate to adult patients with AML in first CR. The results of this study are similar to those achieved with allogeneic BMT.     

Autonomous navigation system of near-Earth spacecraft

An autonomous navigation system for near-Earth spacecraft is described; this system allows determination of the satellite orbit and prediction of its motion parameters. Radio navigation measurements of GLONASS and GPS satellite systems are used for this purpose. The autonomous navigation system is designated for operation on near-Earth orbits which do not go beyond the navigation areas of GLONASS and/or GPS and on orbits with large eccentricity whose apocenter is at a distance of 50–70 thousand km from the Earth’s surface. The developed methods and algorithms for orbit determination are based on the application of laws of motion dynamics of a spacecraft directly at processing primary phase measurements of the carrier frequency and code pseudo-range using an extended measurement base. Algorithms for determination of motion parameters of the spacecraft and results of simulation and operation of a model system are presented. The possibility of creation of an onboard autonomous navigation system with precision and reliability higher than those of the ground measuring complex is demonstrated.     

Green laser sources optimized for highly efficient microdisplay‐based field‐sequential mobile projectors

Abstract— A novel green laser source, based on a monolithic cavity microchip laser platform, has been developed. The laser is designed to be a part of a miniature and efficient RGB light source for microdisplay‐based mobile projector devices. The use of highly efficient, periodically poled MgO‐doped lithium niobate as the non‐linear frequency doubler allows for a significant increase in the overall efficiency of the green microchip laser. Specifically, a 50–150‐mW green output with a wall‐plug efficiency exceeding 10% in the temperature range of greater than 40°C has been demonstrated. A compact package for this laser source with a volume less than 0.33 cm³ is discussed and results of performance tests are presented.     

Pseudospectral method for assessing stability robustness for linear time-periodic delayed dynamical systems

The article presents a pseudospectral approach to assess the stability robustness of linear time-periodic delay systems, where periodic functions potentially present discontinuities and the delays may also periodically vary in time. The considered systems are subject to linear real-valued time-periodic uncertainties affecting the coefficient matrices, and the presented method is able to fully exploit structure and potential interdependencies among the uncertainties. The assessment of robustness relies on the computation of the pseudospectral radius of the monodromy operator, namely, the largest Floquet multiplier that the system can attain within a given range of perturbations. Instrumental to the adopted novel approach, a solver for the computation of Floquet multipliers is introduced, which results into the solution of a generalized eigenvalue problem which is linear w.r.t. (samples of) the original system matrices. We provide numerical simulations for popular applications modeled by time-periodic delay systems, such as the inverted pendulum subject to an act-and-wait controller, a single-degree-of-freedom milling model and a turning operation with spindle speed variation.     

Resource potential for wind-hydrogen power in Ukraine

The paper provides an assessment of the current wind energy potential in Ukraine, and discusses developmental prospects for wind-hydrogen power generation in the country. Hydrogen utilization is a highly promising option for Ukraine's energy system, environment, and business. In Ukraine, an optimal way towards clean zero-carbon energy production is through the development of the wind-hydrogen sector. In order to make it possible, the energy potential of industrial hydrogen production and use has to be studied thoroughly.Ukraine possesses huge resources for wind energy supply. At the beginning of 2020, the total installed capacity of Ukrainian wind farms was 1.17 GW. Wind power generation in Ukraine has significant advantages in comparison to the use of traditional sources such as thermal and nuclear energy.In this work, an assessment of the wind resource potential in Ukraine is made via the geographical approach suggested by the authors, and according to the «Methodical guidelines for the assessment of average annual power generation by a wind turbine based on the long-term wind speed observation data». The paper analyses the long-term dynamics of average annual wind speed at 40 Ukrainian weather stations that provide valid data. The parameter for the vertical wind profile model is calculated based on the data reanalysis for 10 m and 50 m altitudes. The capacity factor (CF) for modern wind turbine generators is determined. The CF spatial distribution for an average 3 MW wind turbine and the power generation potential for the wind power plants across the territory of Ukraine are mapped.Based on the wind energy potential assessment, the equivalent possible production of water electrolysis-derived green hydrogen is estimated. The potential average annual production of green hydrogen across the territory of Ukraine is mapped.It is concluded that Ukraine can potentially establish wind power plants with a total capacity of 688 GW on its territory. The average annual electricity production of this system is supposed to reach up to 2174 bln kWh. Thus, it can provide an average annual production of 483 billion Nm³ (43 million tons) of green hydrogen by electrolysis. The social efficiency of investments in wind-hydrogen electricity is presented.