Cooperative and Reliable ARQ Protocols for Energy Harvesting Wireless Sensor Nodes

One class of wireless sensor networks makes use of sensor nodes that recharge their batteries by harvesting energy from the surrounding environment. Being continuously recharged, the battery does not need to be replaced regularly and the sensor node is maintenance-free. A key module in such sensor network solutions is the data link automatic repeat request (ARQ) protocol, which must be designed to reliably deliver sensor nodes data at the minimum energy cost. With this objective in mind, two ARQ protocol classes are compared. In one class, each sensor node operates individually. In the other, the concept of cooperative communications is adopted, whereby neighboring sensor nodes help each other during the retransmission process. It is shown that the use of cooperative ARQ protocols in energy harvesting sensor networks enables sensor nodes to balance their energy consumption to match their own battery recharge rate. In turn, a balanced energy consumption-to-recharge rate ratio has the potential to improve the network throughput. Both classes of ARQ protocols are analyzed and compared. Estimated throughput gains are discussed under various network scenarios.     

Power factor correction using merged flyback-forward converters

A single stage isolated PFC converter is obtained merging flyback and forward topologies. Thus, the flyback section allows power transfer while the line rectified voltage is not high enough to enable the forward stage operation. By this way, optimal correction is feasible. Also, this approach allows sharing of the transformer and the power transistor     

Hybrid Organic/Inorganic Nanostructures for Highly Sensitive Photoelectrochemical Detection of Dissolved Oxygen in Aqueous Media

Precise, reliable, and remote measurement of dissolved oxygen in aqueous media is of great importance for many industrial, environmental, and biological applications. In particular, photoelectrochemical sensors working in differential mode have recently demonstrated promising properties, in terms of stability, sensitivity, and application potential. Here, a new approach is presented, combining visible light sensitivity, efficient photocurrent generation, and solution‐processed fabrication methods of conjugated polymers, with charge carriers selectivity, energetic alignment favorable to efficient interfacial charge transfer and high surface area achievable by using metal oxide nanostructures. Extensive characterization and optimization of the hybrid organic/inorganic system are carried out, leading to the realization of an oxygen sensor device, based on nanostructured palladium oxide/poly[(9,9‐dioctylfluorenyl‐2,7‐diyl)‐alt‐5,5‐(4′,7′‐di‐2‐thienyl‐2′,1′,3′‐benzothiadiazole]/[6,6]phenyl‐C61‐butyric acid methyl ester (PdO/APFO‐3:PCBM) as materials of choice. State‐of‐the‐art sensitivity, amounting at ?5.87 μA cm^?2 ppm^?1, low background signal, in the order of ?4.85 μA cm^?2, good electrochemical stability for more than 2 h of continuous functioning and high reproducibility of the signal over the pH 1 to 10 range, are reported, making the hybrid device suitable for several practical uses. The results fully validate the mixed organic/inorganic approach for photoelectrochemical applications, and pave the way for its further exploitation in fields like waste water treatment, environmental monitoring, and water splitting.     

Optical and electronic properties of fluorene/thiophene/benzothiadiazole pseudorandom copolymers for photovoltaic applications

A new family of 9,9-bisalkylfluorene (F)/thiophene (T)/benzothiadiazole (B) π-conjugated copolymers for organic solar cells is reported. The structure of the reported copolymers is pseudorandom: in turn each F, T, B monomer unit is alternated to the other randomly distributed two units. Voltammetric, UV–visible, and photoluminescence measurements have been carried out to assess the optical and electronic properties of the synthesized materials. The occurring of photoinduced charge transfer towards a fullerene electron acceptor was investigated by photoluminescence quenching and light-induced electron spin resonance experiments. The copolymer having alternating thiophene monomer units and randomly distributed fluorene and benzothiadiazole units exhibits the most promising characteristics; the photophysic study shows that such polymer/fullerene blend could represent a novel and cheaper material to be used as convenient donor–acceptor system for polymer solar cells.     

Dynamic provisioning of availability-constrained optical circuits in the presence of optical node failures

This paper investigates what impact optical node failures may have on wavelength-division-multiplexed networks, in which reliable end-to-end optical circuits are provisioned dynamically. At the node level, the optical cross-connect (OXC) equipment availability measure is estimated using proven component level availability models. At the network level, end-to-end optical circuits are provisioned only when the level of connection availability required by the application can be guaranteed. With the objective of yielding efficient utilization of the network resources, i.e., fibers and OXCs, circuit redundancy is achieved by means of shared path protection (SPP) switching, in combination with differentiated reliability (DiR). The resulting optimal routing and wavelength assignment problem is proven to be NP-complete. To produce suboptimal solutions in polynomial time, a heuristic technique is presented, which makes use of a time-efficient method to estimate the end-to-end circuit availability in the presence of multiple (link and node) failures. Using the proposed heuristic, a selection of representative OXC architectures and optical switching technologies is examined to assess the influence of the node equipment choice on the overall network performance.     

Thermal Explosion of Powder Mixtures: Numerical Approach

A numerical approach to investigate the heating and the ignition of powder mixtures by radiant energy is presented. The ignition study is based on the possibility of separating the initiation transient from the propagation process, by operating in thermal explosion mode.     

Inhibitory effect of suramin in rat models of angiogenesis in vitro and in vivo

The aim of the present study was to test the ability of the chemotherapeutic agent suramin to inhibit angiogenesis in experimental models in vitro and in vivo. In the culture of rat aortic rings on fibronectin, suramin dose-dependently inhibited vascular cell growth, achieving the maximal effect (mean - 88% versus controls, P < 0.05) at 400 microg/ml. Image analysis showed that suramin could inhibit microvessel sprouting in fibrin from rat aortic rings as evaluated by the ratio between the cellular area and the mean gray value of the sample (sprouting index); suramin at 50 microg/ml significantly reduced the sprouting index from the control value of 0.35+/-0.04 to 0.14+/-0.02 mm2/gray level (P < 0.05). Likewise, the area occupied by cells was 19.2+/-1.8 mm2 as compared with 41.8+/-4.2 mm2 in controls (P < 0.05). In the rat model of neovascularization induced in the cornea by chemical injury, suramin at 1.6 mg/eye per day reduced the length of blood vessels (0.7+/-0.1 mm as compared with 1.5+/-0.1 mm in controls, P < 0.05). In the same model the ratio between the area of blood vessels and the total area of the cornea (area fraction score) was decreased by suramin from 0.19+/-0.02 in controls to 0.03+/-0.003 (P < 0.05). Suramin given i.p. at 30 mg/ kg per day markedly inhibited the neovascularization induced in the rat mesentery by compound 48/80 or conditioned medium from cells secreting the angiogenic protein fibroblast growth factor-3 (FGF-3). The area fraction score in control rats treated with compound 48/80 was 0.31+/-0.03, and this was reduced to 0.07+/-0.01 by suramin (P < 0.05). After i.p. administration of FGF-3 the area fraction score was reduced by suramin from 0.29+/-0.03 to 0.05+/-0.01 (P < 0.05). These results provide evidence that suramin exerts inhibitory effects on angiogenesis in both in vitro and in vivo models.     

The multi-hop multi-rate wavelength division multiplexing ring

Transparency of the optical layer offers the possibility to design a network that operates at varying transmission bit rates. While variable bit rate interfaces are being tested and will soon provide the possibility to optimally select the transmission rate for each optical channel, the potential advantages of relying upon multiple transmission rates in the optical network have yet to be fully explored. In this paper, we define the concept of multi-hop and multi-rate (M&M for short) network in which the tributary signal is transmitted over a concatenation of optical channels, with each optical channel operating at its own transmission rate. The optimal rate of each optical channel is determined by a number of factors including the end node's interface, amount of multiplexed traffic and cost of the network components. The potential advantages provided by the M&M network when compared to first generation optical networks (i.e., SONET/SDH), to single- and multi-hop (constant bit rate) optical networks, are discussed in general and demonstrated numerically in a WDM ring. Presented results show that the network cost reduction achieved by the M&M design is a function of the cost ratio between the optical bandwidth (wavelengths) and the optical terminals     

A programmable optical network testbed in support of C-RAN: a reliability study

With both mobile network services and related data traffic volume on the rise, reliability of the radio access network is of the essence. A number of radio functional splits are defined by 3GPP to offer increased flexibility of implementation and feasibility of new mobile network services. For example, it is possible to implement certain radio functions in the Cloud, an architectural solution referred to as C-RAN. C-RAN solutions require highly reliable backhaul and fronthaul network designs. This paper describes PROnet, a programmable optical software-defined network testbed, which has been upgraded to offer backhaul and fronthaul transport capabilities in support of C-RAN functionalities with increased reliability. The testbed is upgraded with a specially designed 1 + 1 protection mechanism at the Ethernet layer in order to meet the stringent network round-trip requirements imposed by one of the C-RAN functional split options on the fronthaul.